DSpace
 

EMU I-REP >
02 Faculty of Engineering >
Department of Mechanical Engineering >
Theses (Master's and Ph.D) – Mechanical Engineering >

Please use this identifier to cite or link to this item: http://hdl.handle.net/11129/1369

Title: Numerical optimization for cutting process in glass fiber reinforced plastic using conventional and non-conventional methods
Authors: Ibraheem, Hussein Mohammad Ali
Keywords: Mechanical Engineering
Production management
Hard materials - Machining
CO2 Laser, AWJM, Cutting Parameters, Laminated GFRP, Cut Quality, Cost, Productivity and Optimization
Issue Date: Jul-2013
Publisher: Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)
Citation: Ibraheem, Hussein Mohammad Ali. (2013). Numerical optimization for cutting process in glass fiber reinforced plastic using conventional and non-conventional methods. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Mechanical Engineering, Famagusta: North Cyprus.
Abstract: ABSTRACT: Glass fiber reinforced polymer (GFRP) composites are used in many industrial applications due to the advantages they offer compared to other materials. These advantages are the light weight with the high strength, good toughness, high corrosion resistance, high thermal resistance and relative ease of manufacture of components using GFRPs, makes these materials candidates for more and more applications. Joining GFRP composite laminate to other metal material structure could not be avoided; the bolt joining efficiency depend critically on the quality of machined holes in all the industrial applications. There are many cutting processes which are used for producing riveted and bolted joints during the assembly operation of composite laminates with other parts. For riveted and bolted joints, precise holes must be made in the components to ensure high joint strength and precision. Conventional machining such as drilling and milling of hole making in composite materials face many challenges due to the properties of the matrix, diverse fiber , fiber orientation and the inhomogeneous nature of the composite. Non conventional machining like abrasive water jet machining (AWJM) & laser beam machining (LBM) processes have been used for processing composite materials because of the advantages they offered as compared to the traditional techniques. The objective of the current work is to evaluate the effect of drilling, milling, abrasive water jet and laser beam machining parameters on hole making process of GFRP. Statistical approach is used to know the effects of the predictor parameters on the response variables. Analysis of variance (ANOVA) was used to isolate the effects of the predictor parameters affecting the hole making in both abrasive water jet and laser processes. The result shows that abrasive water jet cutting promises a better cutting, less cost of operation and high production compared to the other cutting technologies. Keywords: CO2 laser, AWJM, Cutting Parameters, Laminated GFRP, Cut quality, Cost, Productivity and Optimization. ………………………………………………………………………………………………………………………………………………………………………………………………………… ÖZ: Cam elyaf ile güçlendirilmiş polimer (CTP) Kompozit çünkü bunlar diğer geleneksel ve geleneksel olmayan malzemeler ile karşılaştırıldığında üstün avantajları sunar uygulamaları bir çok sayıdaki kullanılmaktadır. Bu avantajlar ağırlık oranı yüksek mukavemetli, yüksek modüllü, yüksek kırılma tokluğu, yüksek korozyon ve ısıl direnci vardır. Dolayısıyla üretim maliyeti düşük sunan GFRPs ile komponent imalatı göreceli olarak kolay, daha fazla uygulama için bu malzemeler aday hale getirlir. Yapısal malzeme olarak diğer metal malzeme yapısı kompozit laminate katılmadan kaçınılması olamazdı; verimliliği ve kaliteyi birleştiren cıvata tüm endüstriyel uygulamalarda işlenmiş delik kalitesine eleştirel bağlıdır. Çeşitli kesme işlemleri yaygın olarak diğer bileşenler ile kompozit laminatların montaj işlemi sırasında perçinli ve cıvatalarını üretmek için kullanılır. Perçinli ve cıvatalı eklem için, hasarlı ücretsiz ve hassas delikler yüksek ortak gücü ve hassasiyeti sağlamak için bileşenleri olarak yapılmalıdır. Delik delme ve frezeleme fiber takviyeli kompozit yapma gibi Konvansiyonel işleme çeşitli lif ve matriks özellikleri, elyaf oryantasyonu, malzemenin homojen olmayan yapısı nedeniyle zordur. Aşındırıcı su jeti ile işleme (AWJM) & Lazer ışını işleme (LBM) işlemleri nedeniyle geleneksel tekniklerle karşılaştırıldığında bu teknolojilerin sağladığı avantajlardan kompozit malzemelerin işlenmesi için kullanılmaktadır. Mevcut çalışmanın amacı delik GFRP verme sürecinde üzerinde delme, frezeleme, aşındırıcı su jeti ve lazer ışını işleme parametrelerinin etkisini değerlendirmek için. İstatistiksel yaklaşım yanıt değişkenler kontrol parametrelerinin etkisini anlamak için kullanılır. Varyans analizi (ANOVA) analiz aşındırıcı su püskürtme ve lazer işlemleri hem de alma deliği etkileyen parametrelerin etkilerinin izole etmek için yapıldı. Bunun sonucu aşındırıcı su jeti kesim, lazer ışını kesme teknolojisi ile karşılaştırıldığında çalışma ve yüksek üretim daha iyi bir kesim, daha az maliyet vaad edir gösterir. Anahtar Kelimeler: CO2 lazer, AWJM, delme, frezeleme, Parametreler, Lamine GFK, Kesme kalitesi, Maliyet, Verimlilik ve Optimizasyon.
Description: Doctor of Philosophy in Mechanical Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Mechanical Engineering, 2013. Supervisor: Prof. Dr. Majid Hashemipour.
URI: http://hdl.handle.net/11129/1369
Appears in Collections:Theses (Master's and Ph.D) – Mechanical Engineering

Files in This Item:

File Description SizeFormat
IbraheemHussein.pdf4.86 MBAdobe PDFView/Open


This item is protected by original copyright

Recommend this item
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback