|
EMU I-REP >
02 Faculty of Engineering >
Department of Electrical and Electronic Engineering >
Theses (Master's and Ph.D) – Electrical and Electronic Engineering >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/11129/6404
|
Title: | Development of a Wearable Patch Antenna for Patient Monitoring |
Authors: | Uysal, Şener (Supervisor) Yusuf Wada, Muhammad Eastern Mediterranean University, Faculty of Engineering, Dept. of Electrical and Electronic Engineering |
Keywords: | Thesis Tez Electrical and Electronic Engineering Wearable Patch Antennas--Patient Monitoring--Design and Construction Telemedicine Biomedical Patient Monitoring Microstrip Patch Antenna Simulation CST Studio |
Issue Date: | Apr-2023 |
Publisher: | Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ) |
Citation: | Muhammad, Yusuf Wada. (2023). Development of a Wearable Patch Antenna for Patient Monitoring. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Electrical and Electronic Engineering, Famagusta: North Cyprus. |
Abstract: | This research sees to developing a miniature/wearable microstrip patch antenna which
will be lightweight and have a reasonable flexibility limit. Within this study thus,
microstrip patch antenna (MSA) using CST studio was sized and designed. In this
regard, this research sees to developing a miniature/wearable microstrip patch antenna
for patient monitoring applications. The features of the antenna are specifically chosen
to ensure that it meets up with the requirement of the patch antenna. This is to ensure
its compact size, effective length and good transmissions which are all pre-requisite
for a patch antenna intended for patient monitoring purpose as it’s designed to be worn
on the body.
The study comprises of an introductory chapter which gives a general information on
the study background, problem statement, justification of study, scope of research, aim
and objectives, advantages and disadvantages and the thesis guide. The chapter two
encapsulates the review of literature, the third chapter covers the methodology and
procedure for the simulation of antenna, the chapter four introduces the results and
discussion of the simulation and chapter five concludes the research with
recommendations. ÖZ:
Bu araştırma, hafif olacak ve makul bir esneklik sınırına sahip olacak minyatür /
giyilebilir bir mikroşerit yama anteni geliştirmeyi amaçlamaktadır. Bu çalışmada, CST
studio kullanılarak mikroşerit yama anteni (MSA) boyutlandırıldı ve tasarlandı. Bu
bağlamda, bu araştırma hasta izleme uygulamaları için minyatür / giyilebilir bir
mikroşerit yama anteni geliştirmeyi amaçlamaktadır. Antenin özellikleri, yama
anteninin gereksinimini karşıladığından emin olmak için özel olarak seçilmiştir. Bu,
vücuda giyilmek üzere tasarlandığı için hasta izleme amacına yönelik bir yama anteni
için ön koşul olan kompakt boyutunu, etkili uzunluğunu ve iyi iletimlerini sağlamaktır.
Çalışma, çalışmanın geçmişi, sorun açıklaması, çalışmanın gerekçesi, araştırmanın
kapsamı, amaç ve hedefleri, avantaj ve dezavantajları ve tez rehberi hakkında genel
bilgi veren bir giriş bölümünden oluşmaktadır. İkinci bölüm literatürün gözden
geçirilmesini kapsıyor, üçüncü bölüm antenin simülasyonu için metodoloji ve
prosedürü kapsıyor, dördüncü bölüm simülasyonun sonuçlarını ve tartışmasını
tanıtıyor ve beşinci bölüm araştırmayı önerilerle sonuçlandırıyor. |
Description: | Master of Science in Electrical and Electronic Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Electrical and Electronic Engineering, 2023. Supervisor: Prof. Dr. Şener Uysal. |
URI: | http://hdl.handle.net/11129/6404 |
Appears in Collections: | Theses (Master's and Ph.D) – Electrical and Electronic Engineering
|
This item is protected by original copyright
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|