|
EMU I-REP >
07 Faculty of Architecture >
Theses (Master's and Ph.D) – Architecture >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/11129/6449
|
Title: | BIPV Form Factor as an Approach for the Energy Performance of Buildings Exemplified for the Location of Tabriz (Iran) |
Authors: | Sevinç, Harun (Supervisor) Azami, Ahadollah Eastern Mediterranean University, Faculty of Architecture, Dept. of Architecture |
Keywords: | Thesis Tez Architecture Department Building Integrated Photovoltaics--Design and Construction--Climate-responsive design--Tebriz (Iran) Building-integrated photovoltaic systems Buildings--Energy conservation Architecture and energy conservation Sustainable engineering--Solar Energy Buildings--Environmental engineering Building integrated photovoltaics (BIPV) Building Envelope Building Form Form Factor Energy Performance |
Issue Date: | Sep-2021 |
Publisher: | Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ) |
Citation: | Azami, Ahadollah. (2021). BIPV Form Factor as an Approach for the Energy Performance of Buildings Exemplified for the Location of Tabriz (Iran). Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Architecture, Famagusta: North Cyprus. |
Abstract: | Building form and envelope surfaces play a significant role in energy performance
assessment and the generated energy potential of the building integrated photovoltaics
(BIPV) concept in early-stage design. To increase the energy efficiency level, form
factor (FF) is proposed as a helpful tool that provides a strong relationship between the
exposed surface areas and the treated floor area (TFA).
This research aimed at developing a parametric study to determine the related balance
(correlation) between the TFA and needed BIPV area in the form enclosure to meet
specific primary energy demand (SPED) according to the passive house standard
(PHS). For this purpose, various form types including square, rectangle, L, and T
shapes-which is derived of four modular cubes- classified based on the same form
factor (FF). Optimal form selection per group carried out through the BIPV potential
evaluation for the exposed surfaces in six azimuths separately. Afterward, BIPV
efficiency level examined by its utilization factor and coverage index scenarios based
on façade and roof combination priorities.
The results indicate that the generated energy sufficiency is affected by the form
configuration and its orientation. Additionally, the optimal BIPV-based FF value of
0.71 implies the priority of roof-based scenarios for less BIPV utilization. Finally, the
correlation value for the BIPV coverage index relative to the total envelope for the
optimal forms and orientation is higher than 0.92, which can be extended to other
forms in different locations as an assessment model. ÖZ: Bina formunun ve kabuğunun yüzeyleri, enerji performans değerlendirmesinde ve erken tasarım aşamasında bina entegre fotovoltaik (BIPV) konseptinin enerji potansiyeli için önemli bir rol oynamaktadır. Enerji verimliliği seviyesini artırmak için form faktörü (FF), yapının dışa açık yüzey alanları ile ısıtma / soğutma için gerekli enerji kullanım alanı (TFA) arasında güçlü bir ilişki sağlayan araç olarak önerilmektedir. Bu araştırma, pasif ev standardına (PHS) göre spesifik birincil enerji talebini (SPED) karşılamak için enerji kullanım alanı (TFA) ile ihtiyaç duyulan bina entegre fotovoltaik (BIPV) alanı arasındaki ilgili dengeyi (korelasyonu) belirlemek amacıyla parametrik bir çalışma geliştirmeyi amaçlamıştır. Bu amaç doğrultusunda, dört modüler küpten elde edilen kare, dikdörtgen, L ve T gibi çeşitli form türleri aynı form faktörüne (FF) göre sınıflandırılmıştır. Her grup için uygun modüler form seçimi gerçekleştirilerek altı ayrı azimuta dışa açık yüzeyler için ayrı ayrı bina entegre fotovoltaik (BIPV) potansiyeli değerlendirilmiştir. Sonrasında, cephe ve çatı kombinasyon önceliklerine göre kullanım faktörü ve kapsama endeksi senaryoları ile bina entegre fotovoltaik (BIPV) verimlilik düzeyi incelenmiştir. Sonuçlara göre, üretilen enerji yeterliliğinin form konfigürasyonundan ve oryantasyonundan etkilendiğini göstermektedir. Ek olarak, 0,71'lik BIPV tabanlı form faktör (FF) değeri, daha az bina entegre fotovoltaik (BIPV) kullanımı için çatı tabanlı senaryoların önceliğini ifade eder. Son olarak, uygun formlar ve oryantasyon için toplam içeriğe göre bina entegre fotovoltaik (BIPV) kapsam endeksinin korelasyon değeri 0,92'den yüksektir ve bir değerlendirme modeli olarak farklı yerlerdeki diğer formlara genişletilebilir. |
Description: | Doctor of Philosophy in Architecture. Institute of Graduate Studies and Research. Thesis (Ph.D.) - Eastern Mediterranean University, Faculty of Architecture, Dept. of Architecture, 2021. Supervisor: Assoc. Prof. Dr. Harun Sevinç |
URI: | http://hdl.handle.net/11129/6449 |
Appears in Collections: | Theses (Master's and Ph.D) – Architecture
|
This item is protected by original copyright
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|