2024-03-29T05:06:54Zhttp://i-rep.emu.edu.tr:8080/oai/request
oai:i-rep.emu.edu.tr:11129/1532012-12-26T06:21:06Zhdl_11129_13Impact of Supply Chain Strategies on Bullwhip EffectÇatalbaş, SevtapIndustrial EngineeringBusiness Logistics - Mathematical ModelsBusiness Logistics - Mathematical ModelsDelivery of Goods - ManagementSupply Chain - Bullwhip Effect - Spreadsheets - SimulationChanges of today’s firm’s competitiveness strategies from firms level to improved
Supply Chain level causes increases in number and importance of Supply Chain studies
in the literature. Variation between demand and orders is became the most important
problem and most studied Supply Chain topic. This problem named in literature as
Bullwhip Effect, is studied in this thesis with possible 11 factors effect on bullwhip. By
using the improved Bullwhip Effect formula; lead time, review period, demand
distribution, ordering cost, numbers of forecast periods are found as the factors which
have significant effect on Bullwhip. In addition to this, for the use of similar Supply
Chain researches, or real Supply Chain members, an improved spreadsheet simulation
tool is prepared to test the proposed Supply Chain structures effects on different Supply
Chain performance measures.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2009. Supervisor: Assoc. Prof. Dr. Nureddin Kırkavak.Eastern Mediterranean University (EMU)2012-12-04T14:24:21Z2012-12-04T14:24:21Z2009ThesisCatalbas, Sevtap. (2009). Impact of Supply Chain Strategies on Bullwhip Effect. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/153en
oai:i-rep.emu.edu.tr:11129/1882012-12-26T07:28:33Zhdl_11129_13Occupational noise exposure in small and medium-sized industries in North CyprusKhameneh, Joubin ZahiriIndustrial EngineeringLabor Supply - Industrial Safety - Cyprus, NorthIndustrial Noise - Noise Control - Cyprus, NorthOccupational Health and Safety - Noise ExposureSmall and Medium-Size Industries in North Cyprus - Hearing Conservation - Perception RiskABSTRACT: The aim of the study is to investigate the noise levels in various small and mediumsized industries in North Cyprus in order to identify industries that might need further investigation due to high noise levels. No prior studies have been done on industrial noise exposure in Northern Cyprus. Occupational safety and health rules and regulations in North Cyprus states that monitoring noise levels, understanding the workers individual noise exposure and providing personal ear protectors is the responsibility of employers. It is observed that none of the companies visited are following these requirements. Exposure to excessive noise can cause health problems including temporary or permanent hearing loss, concentration problems, stress, nervousness, sleeping problems and fatigue. We measured noise levels in different industrial settings in North Cyprus using cirrus 273 integrated sound level meter with octave band filters. Occupational safety and health standards for noise exposure were used as the benchmark for our data analysis. Questionnaires were designed to determine how much employees were affected by high noise levels in the workplace. We analyzed the data using SPSS statistical program. Survey responses identified the most likely problems faced by industrial workers in North Cyprus. Sound level mapping informed worker noise exposure. Future studies will focus on industries with the highest noise levels, monitoring worker noise exposure using a dosimeter.
Keywords: Occupational Health and Safety, Noise Exposure, Small and Medium-Size industries in North Cyprus, Hearing Conservation, Perception Risk.
……………………………………………………………………………………………………………………………………………………………………………………………………………………
ÖZ: Bu çalışmanın amacı Kuzey Kıbrıs taki küçük ve orta ölçekli işletmelerin gürültü seviyelerini araştırmak ve bu yönde daha fazla ilgi isteyen yüksek gürültülü işletmeleri ortaya çıkarmaktır. Kuzey Kıbrista daha önce endüstriyel gürültü maruziyeti ile ilgili bir çalışma yapılmamıştır. KKTC iş sağlığı ve guvenliği yasasına göre işyerlerinde gürültü seviyesinin izlenmesi, çalışanların kişisel maruziyetinin anlaşılması ve kişisel kulak koruyucu ların sağlanması işverenin yükümlülüğüdür. Ziyaret edilen şirketlerden hiç birinin bu gereksinimleri yerine getirmemektedir. Yüksek seviyedeki gürültü maruziyeti kalıcı veya gecici sağırlık, dikkat sorunu, stres, gerginlik, uyku problemleri ve aşırı yorgunluk gibi sağlık sorunları yaratabilir. Kuzey Kıbristakı değişik sanayilerin gürültü seviyeleri Cirrus 273 marka gürültü ölçüm cihazı ile ölçülmüştür. Veri analizinde iş sağlıgı ve güvenliği standartları baz alınmıştır. İş yerindeki gürültüden çalışanların ne kadar rahatsız olduğunu anlamak amacıyla anket tasarlanmıştır. Anketlerin analizi Kuzey Kıbrıs taki değişik endüstrilerde gürültü bağlantılı problemlerin ortaya çıkarılmasını sağlamıştır. Gürültü seviye haritalarının hazırlanması çalışanların iş yerindeki gürültü maruziyeti hakkında fikir vermiştir. Gelecek çalışmalar en yüksek gürültü seviyesi tespit edilen endüstrilerde çalışanların gürültü maruziyetinin dosimeter ile ölçülmesini içerecektir.
Anahtar Kelimeler: İş Sağlığı ve Güvenliği, Gürültü Maruziyeti, Kuzey Kıbrıstaki Kücük ve Orta Ölçekli İşletmeler, İşitmenin Korunması, Algılama Riski.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Assist. Prof. Dr. Emine Atasoylu.Eastern Mediterranean University (EMU)2012-12-10T12:43:10Z2012-12-10T12:43:10Z2011ThesisKhameneh, Joubin Zahiri. (2011). Occupational noise exposure in small and medium-sized industries in North Cyprus. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/188en
oai:i-rep.emu.edu.tr:11129/2492013-01-04T00:00:18Zhdl_11129_13The Impact of Laptop and Desktop Computer Workstation on Human PerformanceOnsorodi, Amir Hossein HabibiIndustrial EngineeringHuman-computer interaction - Musculoskeletal Discomfort - Desktop Computer and Laptop Computer UseABSTRACT: The goal of this study was to define the differences between desktop computer users and laptop computer users. Also define the affection of working with computer on different body regions. A questionnaire prepared and published on a web site. 100 people filled it. The information of the questionnaire give important data about the work related musculoskeletal disorders. The questionnaire result showed that women have more disorders in their muscles. Also ache and pain is two important type of discomforts that most of the people fill them on their body regions. Neck, shoulder, upper back, lower back and hands recognized as a region with maximum risk for suffering to muscles disorders and elbows, hips\thighs\buttocks, knees and ankles\feet have been reported as a region with minimum pain. Electromyography tests have been done on 5 respondents. The experiments have been done on 6 different body regions for each of the respondents when they are working with a desk type computer and a laptop computer. Electromyography chart draw for each position. The chart analysis shows that desktop computer user and laptop computer user burden pressure when they are using computer. In some position showed that desktop computer respondents have more pressure than laptop computer respondents. Also sometimes the result for each of the respondent in a same position was different. But totally a significant pressure observed when the respondents working with laptop, especially in neck muscles. For analyzing of electromyography data used a hypothesis test. For each respondent for all of the body regions an ANOVA table prepared per working with desktop computer and laptop computer. In all of the tests, hypothesis test rejected and it shows that working with computer and laptop cause discomforts for all of the respondents in all of the body regions. In another ANOVA analysis, we studied the affection of using of desktop computer and laptop computer on each of the body regions for all of the respondents. The result shows that just in shoulder region when the respondents working with desktop computer we cannot say that it has affection, in other region for both of computer we ham significant disorders.
Also we studied the interaction between type of computer and body regions. The ANOVA result showed that each of them did not have any affection on respondents but the interaction between them has a significant difference.
Keywords: Musculoskeletal discomfort, Desktop computer and laptop computer use.
……………………………………………………………………………………………………………………………………………………………………………………………………………………
ÖZ: Bu çalışmanın amacı, masaüstü bilgisayar kullanıcıları ve dizüstü bilgisayar kullanıcıları arasındaki farklılıkları tanımlamaktır. Ayrıca, bu çalışmanın bir digger amacı; vücudun farklı bölgelerini bilgisayar ile çalışma etkisini ortaya koymaktır. Bu çalışma için bir anket hazırlanmıştır ve bu anket bir web sitesinde yayınlanarak 100 kişi tarafından doldurulmuştur. Anket sonuçları; bilgisayar kullanımı esnaasındaki kas-iskelet bozuklukları ile ilgili önemli bilgiler vermektedir. Anket sonuçları, kadınlarda kas rahatsızlıklaırnın daha yaygın olduğunu göstermiştir. Ayrıca ağrı ve sızlamanın, değişik vücut noktalarında rastlanan en sık rahatsızlıklar olduğu saptanmıştır. Boyun, omuz, üst sırt, alt sırt ve dirseklerde kas rahatsızlıkları yaygın bir şekilde saptanırken, eller, kalça, diz ve ayak bileklerinde bu tür rahatsızlıklara pek de sık rastanılmamaktadır. 5 katılımcıya elektromiyografi testi yapılmıştır. Bu testler; masaüstü ve dizüstü bilgisayarlar kullanılarak, 6 değişik vücut bölgesinden kas hareketleri izlenerek gerçekleştirilmiştir. Her bir bölge için elektromiyografik grafik çizilmiştir. Grafik analizleri, masaüstü ve dizüstü bilgisayar kullanıcılarında ortaya çıkan baskıyı göstermektedir. Genellikle dizüstü kullanıcılarında kaslara daha çok yük yapıldığı ortaya konmuştur. Ayrıca bazen aynı pozisyonda her bir katılımcı için farklı sonuçlar elde edilmiştir. Katılımcılarda özellikle dizüstü bilgisayar ile çalışırken boyun kaslarında basınç gözlemlenmiştir. Elektromiyografik verilerin analiz edilmesi için bir hipotez testi kullanılmıştır. Her katılımcı için; masaüstü ve dizüstü bilgisayar kullanımında tüm vücut bölgeleri için bir ANOVA tablosu hazırlanmıştır. Tüm testlerde, hipotez reddedilmiştir. Bu da tüm katılımcılarda, tüm vücut noktalarında her hem masaüstü hem de dizüstü bilgisasyarın rahatsızlıklara yolaçtığı göstermektedir.
Ayrıca bilgisayar ve vücut bölgeleri türü arasındaki etkileşim incelenmiştir. ANOVA sonucu her biri katılımcıda bilgisayar tipinin (masaüstü/dizüstü) ve vücut bölgesinin etkileşerek kas-iskelet sistemi rahatsızlıklarına yol açtığı ortaya konmuştur.
Anahtar Kelimeler: Kas-iskelet rahatsızlıkları, masaüstü bilgisayar ve dizüstü bilgisayar.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Assist. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU)2013-01-03T06:54:23Z2013-01-03T06:54:23Z2011ThesisOnsorodi, Amir Hossein Habibi. (2011). The Impact of Laptop and Desktop Computer Workstation on Human Performance. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/249en
oai:i-rep.emu.edu.tr:11129/6012013-08-12T23:00:36Zhdl_11129_13Construction of an Expert System for Assessment of Work-Related Musculoskeletal Disorders for VDT UsersShavarani, Seyed MahdiIndustrial EngineeringIndustrial Safety - Expert SystemsMusculoskeletal system - Wounds and injuries - Work Related InjuriesWork-Related Musculoskeletal Disorders - WRMSD - Ergonomic Expert System - CLIPS - MSD Risk FactorsABSTRACT: Work-related injuries, especially musculoskeletal disorders create big problems in workstations where employees use computers commonly. Using computers for long durations and in repetitive manner will lead to health problems that are very costly and productivity will be reduced dramatically. Expert systems (ES) can be the solution for dealing with these problems.
This thesis aims to design a rule-based expert system that could be used to analyze and evaluate the working conditions of computer users by ergonomics standards. The knowledge base of this expert system will be acquired from OSHA’s (Occupational Safety and Health Administration) and Washington state ergonomic standards. CLIPS (C Language Integrated Production System) is used to construct this ES. In this research, risk factors which lead to formation of work-related musculoskeletal disorders (WRMSDs) were identified, to draw heuristically solutions to musculoskeletal discomfort problems, notify the computer user about the existence of WRMSDs hazards in the workplace, and to help the computer user to avoid WRMSDs risk factors. Thus, the significance of this study is to help the organizations to overcome costly damages and productivity-reduction.
Keywords: Work-Related Musculoskeletal Disorders, WRMSD, Ergonomic Expert System, CLIPS, MSD risk factors.
……………………………………………………………………………………………………………………………………………………………………………………………………………………
ÖZ: İşe bağlı yaralanmalar özelikle de kas iskelet sistemi hastalıkları çalışanların sıklıkla bilgisayar kullandıkları iş yerlerinde büyük sorunlar yaratabilir. Uzun süre ve sürekli bilgisayar kullanımına devam etmek, ciddi sağlık problemlerine yol acmaktadır ki bu durum verimliligi önemli ölçüde azaltır ve iş yeri için cok masraflıdır. Uzman Sistem bu sorunların cözülmesinde bır yol olabilir. Bu tez ergonomi standartlarına göre bilgisayar kullanıcılarının çalışma ortamlarını analiz etmek ve değerlendirmek için kullanılabilecek bir kural tabanlı uzman sistem tasarımını hedeflemektedir. Bu uzman sisteminin bilgi tabanı OSHA (Mesleki Güvenlik ve Sağlık İdaresi) ve Washington eyaleti ergonomi standartlarından elde edilecektir. Bu sistemi oluşturmak için CLIPS (C Language Integrated Production System) kullanılır. Bu araştırmada, kas-iskelet sistemi rahatsızlıkları sorunlara heuristically çözümler çizmek için, işyerinde WRMSDs tehlikelerinin varlığı hakkında bilgisayar kullanıcılarını bildirmek ve bilgisayar kullanıcılarına WRMSDs risk faktörleri önlemek için yardımcı olmak amacı ile işle ilgili kas iskelet sistemi bozukluklarının oluşumunda (WRMSDs) etkili olan risk faktörleri belirlenmiştir. Bu nedenle, bu çalışmanın önemi kuruluşları masraflı zararlardan ve verimliliği azaltan etkenlerden uzaklastırmaya yardımcı olmaktır.
Anahtar Kelimeler: WRMSD, uzman sistem, CLIPS, MSD tehlikelerinin.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Assist. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU)2013-08-12T07:12:56Z2013-08-12T07:12:56Z2013ThesisShavarani, Seyed Mahdi. (2013). Construction of an Expert System for Assessment of Work-Related Musculoskeletal Disorders for VDT Users. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/601en
oai:i-rep.emu.edu.tr:11129/12232013-11-13T00:00:32Zhdl_11129_13Transient Analysis of Single Machine Production Line DynamicsRismanchian, FarhoodIndustrial EngineeringProduction Management - Production LineProduction Line - Alternating Renewal Process - Renewal Function - Availability Function - Due Date PerformanceABSTRACT: In this thesis a single machine production line is modeled by an alternating renewal process. We derive efficient approximations for the first and second order transient performance measures of a production line which can be in one of the two states up(working) or down(failed), modeling the production line by an alternating renewal process. A due date performance measure is derived and discussed. The thesis also discusses two optimizations problems in the production line. Numerical examples are provided to illustrate the procedure.
Keywords: production line, alternating renewal process, renewal function, availability function, due date performance.
…………………………………………………………………………………………………………
ÖZ: Bu tezde almaşık yenileme süreci ile tek makinalı bir üretim hattı modellenmiştir. Durumu yukarıda(çalışan) veya aşağıda(başarısız) olabilen bir üretim hattı’nın birinci ve ikinci derece geçici başarım ölçütlerine verimli yaklaşıklama türetiyoruz. Bu üretim hattı almaşik yenileme süreci ile modellenmiştir. Ayrıca bir vade tarihi başarim ölçütü türetilmiş ve tartışılmıştır. Bu tez ayni zamanda üretim hattinda iki eniyileme problemi irdelemektedir. Prosedürü göstemek için sayısal örnekler sağlanmiştir.
Anahtar kelimeler: üretim hatti, almaşik yenileme süreci, yenileme fonksiyonu, vade tarihi başarımı.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Prof. Dr. Alagar Rangan.Eastern Mediterranean University (EMU)2013-11-12T11:28:14Z2013-11-12T11:28:14Z2013ThesisRismanchian, Farhood. (2013). Transient Analysis of Single Machine Production Line Dynamics. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1223en
oai:i-rep.emu.edu.tr:11129/12562014-06-13T23:00:30Zhdl_11129_13Anthropometric home office computer workstation setupDavari, MehdiComputer Workstations - Health AspectsComputer Workstation Design - Human EngineeringHuman - Computer InteractionMusculoskeletal System - Diseases - PreventionABSTRACT: Long hours of computer use causes different types of health issues such as noticeable increase in risk factors of musculoskeletal disorders in long-term.This study aims to design anthropometric home office computer workstation setup for computer users. For this purpose, anthropometric measurements were collected to design the most suitable home office computer workstation to reduce the perceived musculoskeletal discomfort. Electromyogram experiments on two different computer workstations were conducted to find out the muscle groups exposed to pressure during working with computer activities. The significance of this study is to provide muscle discomfort reducing furniture and user-friendly interfaces during working with computer. Such proper home office computer workstation is necessary to prevent strain injuries which can lead to long- term disabilities.
……………………………………………………………………………………………………………………………………………………………………………………………………………………
ÖZ: Uzun süre bilgisayar kullanımi farklı sağlık sorunlara yol açar örneğin, uzun vadede kas iskelet sistemi hastalıklarında artışlara neden olur.
Bu çalışma, bilgisayar kullanıcıları için antropometrik ev ofis bilgisayarı iş-istasyonu kurulumu tasarlamayı amaçlamaktadır. Bu çalışmada, algılanan kas-iskelet rahatsızlığı azaltmak için en uygun ev ofis bilgisayar iş istasyonu tasarlamak için antropometrik ölçümler toplanmıştır. İki farklı bilgisayar iş-istasyonu üzerinde, bilgisayar faaliyetleri sırasında basınca maruz kalan kas gruplarını tespit etmek için elektromiyogram deneyler yapılmıştır. Bu çalışmanın önemi bilgisayar ile çalışırken boyunca kas rahatsızlıklarını azaltıcı mobilya ve kullanıcı dostu arayüzleri sağlamaktır. Bu koşullara uygun ev ofis bilgisayar iş-istasyonu uzun dönemli sakatlıklara yol açabilir zorlanma yaralanmaları önlemek için gereklidir.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Assist. Prof. Dr. Orhan Korhan.Eastern Mediterranean UniversityMusculoskeletal Discomfort - Computer Workstation Design - Computer Users2014-06-13T10:20:53Z2014-06-13T10:20:53Z2013-01ThesisDavari, Mehdi. (2013). Anthropometric home office computer workstation setup. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1256en
oai:i-rep.emu.edu.tr:11129/12742014-06-17T23:00:31Zhdl_11129_13Optimizing the route of an assembly armJabbari K., HajiehAssembling machinesProduction managementAssembly-line methods - AutomationTSP - Bipartite Graph - Pick and Place Robot - Heuristic Algorithms - Minimal CutABSTRACT:
Optimizing the route of an assembly arm is a procedure of finding placement tours of pick and place robot's arm for the equipping of Printed Circuit Board (PCB). The problem of finding placement tours is a production planning problem with n positions on a board as the assembly points and n bins containing n components as n locations for the bins, called cell points. PCB manufacturing requires a good route for the robot that makes production, so that time savings can be achieved. In the robots considered, working time of the robot is proportional to the distance travelled, and the problem appears as a combination of the Traveling Salesman Problem (TSP) and the matching problem. Such a problem is a special type of the TSP, known as the bipartite TSP. Given the complete graph on vertices, a weight function and a partition of into 2 subsets of size , bipartite TSP is to find a Hamiltonian cycle of minimum weight that visits the subsets in a fixed alternating order. The problem has simulated many efforts to find an efficient algorithm but no algorithm is presently available that can solve for the optimal solution of this problem in polynomial time. As its complexity is NP-Complete the general opinion of scientists is that a fast polynomial algorithm does not exist. The aim of this thesis is to introduce an efficient approximation algorithm for medium-sized (up to 500 assembly points) problems and to derive bounds for the typical length of optimal tours. We present an iterative algorithm which applies a cutting model to get a shorter lower bound by adding cuts to the Linear Programming (LP) relaxations and a combined heuristic algorithm for finding an acceptable upper bound when the optimal integer solution is not found. The method is applied for both Dantzig-Fulkerson-Johnson and Miller-Tucker-Zemlin models. As the problem is NP-Complete, it is often unnecessary to have an exact solution. Thus a special heuristic algorithm is developed to obtain near-optimal solution in a reasonable time, suitable for practical purposes. The developed heuristic method is applied a constructive scheme combining two famous efficient heuristics: Nearest Neighbor and Insertion algorithms.
…………………………………………………………………………………………………………………………………………………………………………………………………………
ÖZ:
Bir montaj kolu rota optimizasyonu seçme ve yerleştirme robot kolunun yerleştirme turlarını bulma işlemidir ki Baskılı Devrenin onatılması için kullanılır. Yerleştirme turları bulma sorunu bir üretim planlama sorunudur. Bu problemlerde montaj noktaları için n tane pozisyon vardır ve her birisinin içerisinde bir tane birleşen parçası yerleştirilmiş n tane kutu vardır ki bunlara hücre denilir. Baskılı devre üretimi zaman tasarufu elde edebilir böylece üretim yapan robot için iyi bir rota bulunması gerekir. Ele alınan robotlarda çalışma süresi gezilen mesafe ile orantılıdır. Bu tip problemler Gezgin Satıcı Problemi ve Eşleştirme Probleminin birleşimi olarak görülür. Böyle bir problem özel gezgin satıcı problemidir ki ikili gezgin satıcı problemi olarak bilinir. Verilen tamamlanmış grafikde G=(V,E), 2n köşe noktası ve ağırlık fonksiyonu W:E→R≥0 ve V iki n taneli alt kümeye bölünen ikili gezgin satici problemi minumum agırlıklı Hamilton çevrimi bulmakdır ki bir alt kümeyi sabit bir alternatif sırayla ziyaret eder. Etkin bir algorithma bulmak için çok çaba harcanmış ama halen bu sorunun optimal çözümü bulmak için polinom zamanda bir algoritma bulunmamıştır. Bilim adamlarının genel görüşüne göre hızlı bir polinom algoritma yoktur çünkü bu problem bir polinom zamanlı olmayan-tam problemidir. Bu tezin amacı orta büyüklükteki soruları (500 montaj noktasına kadar) için etkin bir yaklaşım algoritması tanıtmaktır. En uygun turların uzunluğunun sınırlarını türetir. Biz bir yenilenen algoritma sunuyoruz ki bir kesim modeli ve birleştirilmiş sezgisel algoritmadan oluşur. Optimal tam sayı çözüm bulunmadığında kesim modelini daha yakın bir alt sınırı ve sezgisel algoritmayı kabul edilebilir bir üst sınırı bulmak için
kullanıyoruz. Bu yöntem Dantzig-Fulkerson-Johnson ve Miller-Tucker-Zemlin modelleri için uygulanmıştır. Problem NP-Tam olduğu için çoğu kez kesin bir çözüm olması gereksizdir. Bu nedenle özel bir sezgisel algoritma geliştirilmiştir ki neredeyse optimal çözümü makul bir süre içerisinde ve pratik amaçlar için uygun olan cevabı elde ediyor. Geliştirilmiş sezgisel yöntem iki tane ünlü etkin yapısal sezgiselin birleşimidir. Bahsedilen iki sezgisel algoritma en yakın komşu ve yerleştirme algoritmalarıdır.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU)2014-06-17T08:32:34Z2014-06-17T08:32:34Z2011-01ThesisJabbari K., Hajieh. (2011). Optimizing the route of an assembly arm. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1274en
oai:i-rep.emu.edu.tr:11129/13712014-10-01T23:00:38Zhdl_11129_13Anthropometric computer workstation design to reduce perceived musculoskeletal discomfortlale, KemalIndustrial EngineeringComputer Workstations - Health AspectsComputer Workstation Design - Human EngineeringHuman - Computer InteractionMusculoskeletal System - Diseases - PreventionAnthropometric Data, Percentiles, Ergonomy Design Criteria, LayoutABSTRACT: Numerous office employees who work with desktop computer workstations endure various musculoskeletal disorders every day. The objective of this study is to determine the most ergonomic desktop workstation for office workers. A survey was prepared and distributed to 42 participants from Eastern Mediterranean University who use desktop computer workstations for at least 6 hours per day. Specific anthropometric measurements of the all of 42 subjects were then collected and amongst the contributors, 10 were randomly selected participate in a surface electromyogram experiment to determine muscular impulse differences between standard desktop computer workstations and optimized desktop computer workstations. This is aimed to compare stations due to research. This research’s main focus is seeking and providing the evidence of the symptoms those cause, musculoskeletal system and those symptoms' frequencies are significant in the development of work-related musculoskeletal disorders (WRMSDs). Discomforts in shoulder, neck, lower and upper back and hand-wrist region are more pronounced. Therefore 6 of those regions were recorded. Factorial analysis and records of the EMG's controls and tests group respondents proves risk factors which are determined in results part of thesis with help of ANOVA. Each test group respondents' determined data indicated, musculoskeletal strain's mean differs in time, but it is not true for the control group from experienced. This study intends to reduce possible WRMSDs caused by desktop computer workstations. One other aim is eliminating psychological and financial losses for workers, minimize decrease in job performance for companies, monetary loss for businesses and reduce social security expenses for citizens.
Keywords: Work Related Musculoskeletal Disorders, Surface Electromyograph, sEMG, Anthropometry.
…………………………………………………………………………………………………………………………………………………………………………………………………………
ÖZ: Masaüstü bilgisayar iş istasyonları ile çalışan birçok ofis elemanları, son zamanlarda çeşitli kas-iskelet bozuklukları yaşamaktadırlar. Bu araştırmanın amacı, ofis çalışanları için en ergonomik masaüstü iş istasyonu belirlemektir. Bir anket hazırlanarak, Doğu Akdeniz Üniversiteside günde en az 6 saat masaüstü bilgisayar iş istasyonu kullanan 42 katılımcıya dağıtıldı. Katılımcıların belirli antropometrik ölçümler alındıktan sonra, katkıda bulunanlar arasından 10 iştirakçi rastgele seçilerek, standart masaüstü bilgisayar iş istasyonları ve optimize edilmiş masaüstü bilgisayar iş istasyonları arasında kas dürtü farklılıklarını belirlemek için bir yüzey elektromiyogram deneyi uygulandı. Tezin yazılmasındaki amaç, iskelet-kas sisteminde oluşan rahatsızlıkların belirtileri ve bu belirtilerin oluşum sıklığının kişilerin mesleki hayatlarında oluşturduğu etkileri araştırmak ve bulunan kanıtları sunmaktır. Çalışma hayatındaki bilgisayar başında harcanılan zaman diliminde kişilerin oturma ve bilgisayar kullanma şekillerinden oluşan rahatsızlıkların en yaygın olanları ağrı ve sızlama rahatsızlıkları olduğunu ortaya koyan bu araştırmada görülmüştür ki, rahatsızlıkların en falza omuz, üst sırt, boyun, el ve bilekle birlikte alt sırt bölgelerinde karşılaşılmaktadır. Risk faktörleri, test ve kontrol gruplarına ait yüzeysel EMG ölçüm değerleri, risk değerlendirme modeli tarafından belirlenmiş olup, ANOVA ve faktöryel çözümleme yöntemleri uygulanılarak doğrulanmıştır. Çalışmaların sonuçunda ulaşılan veriler göstermektedir ki; ortalama iskelet-kas gerilimi test grubu katılımcılarında zamanla değişkenlikler gösterirken bu değişkenlikler kontrol grubu içerisinde görülmemiştir. Bu çalışma, masaüstü bilgisayar iş istasyonlarının yol açtığı kas-iskelet hastalıklarını azaltmak, işçiler için psikolojik rahatsızlıkları ve finansal kaybı, şirketler için azalmış iş performansını, işletmeler için parasal kaybı, ve vatandaşlar için sosyal güvenlik giderlerini azaltmak veya ortadan kaldırmayı amaçlamaktadır.
Anahtar Kelimeler: Mesleki, Kas-iskelet Bozuklukları, sEMG, Yüzey Elektromiyagram, Antropometri.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Assoc. Assist. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-10-01T07:01:57Z2014-10-01T07:01:57Z2013-09ThesisLale, Kemal. (2013). Anthropometric computer workstation design to reduce perceived musculoskeletal discomfort. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1371en
oai:i-rep.emu.edu.tr:11129/14452014-10-31T00:00:52Zhdl_11129_13Studies on approximations to renewal functions and their applicationsHadji, Ehsan MoghimiIndustrial EngineeringWarranty - Mathematical modelsRenewal Function G-Renewal Function Two-Dimensional Renewal Function Moments Based Approximation General Repair Renewing WarrantyABSTRACT: Renewal equations and renewal type equations are frequently encountered in several
applications when regenerative arguments are used in the modeling. These equations
which are Volterra type integral equations contain the renewal function in the kernel
which is a key tool in renewal processes. Analytical solutions of the renewal
equations are possible only for a very few cases. Although several approximations
for the renewal function are available, the use of any method depends on the
characteristics of the underlying distribution function such as skewness, kurtosis,
modes, and singularities. Further, all the approximations proposed so far presuppose
the knowledge of the underlying distribution function. This thesis proposes nonparametric
approximations to several renewal functions based only on the first few
moments of the distribution function. The renewal functions considered are onedimensional
renewal function, g-renewal function, and two-dimensional renewal
function. The approximations are compared with the actual values wherever
available and with benchmark approximations. Examples from areas such as
reliability, queuing theory, and warranty models are developed to illustrate the
efficacy of the approximations.
Keywords: Renewal Function, G-renewal Function, Two-dimensional Renewal
Function, Moments Based Approximation, General Repair, Renewing Warranty.
…………………………………………………………………………………………………………………………
ÖZ: Modellemede tekrar üretilmis ispatlar kullanıldığı zaman, çesitli uygulamalarda,
yenilenen denklemler ve yenilenen denklem çesitlerine sıklıkla rastlanmaktadır.
Volterra tipi tümlevsel denklemler olan bu denklemler, yenileme surecinde önemli
bir araç olan kernel içerisinde yenileme fonksiyonu içermektedirler. Yenilenen
denklemlerin sayısal çözümleri sadece bir kaç durumda mümkündür. Yenilenme
fonksiyonları için çesitli yaklasımlar bulunmasına rağmen herhangi bir metodun
kullanımı temel dağilim fonksiyonunun çarpıklık, basıklık, doruk ve tutarsizlık gibi
özelliklerine bağlıdır. Ayrıca simdiye kadar önerilen tüm yaklasımlar, temel dağılım
fonksiyonunun bilinmesini varsaymıslardır. Bu tez çesitli yenileme fonksiyonuna,
dağılım fonksiyonunun sadece ilk bir kaç momentine göre, parametrik olmayan
yaklasımlar öneriyor. Dikkate alınmıs yenilenen fonksiyonlar tek boyutlu, gyenilenen
ve iki boyutlu yenilenen fonksiyonlardır. Yaklasımlar, varsa gerçek
değerlerle, yoksa en iyi karsılarstırmalı denektasıyla kıyaslanmıstir. Yaklasımların
etkinliğini göstermek için örnekler güvenirlilik, kuyruk kuram ve teminat modelleri
alanlarında gelistirilmistir. Anahtar Kelımeler: Yenileme Fonksiyonu, G-yenileme Fonksiyonu, Iki-boyutlu
Yenıleme Fonksıyonu, Momentlere Bağlı Yaklastırım, Genel Onarim, Temınat
Yenilendirmesi.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Prof. Dr. Alagar Rangan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-10-30T11:54:54Z2014-10-30T11:54:54Z2011-09ThesisHadji, Ehsan Moghimi. (2011). Studies on approximations to renewal functions and their applications. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1445en
oai:i-rep.emu.edu.tr:11129/14512014-10-30T14:25:23Zhdl_11129_13Occupational health and safety in Iran: Accident cost analysis and the importance of education in accident preventionGourabi, Hamed HosseinianIndustrial EngineeringIndustrial accidents - IranIndustrial safety - Workers Education - IranOccupational Accidents Injury Accidents Prevention Job Training Direct Cost indirect CostABSTRACT: The aim of this work is to introduce project financing and underlining its importance and application for financing large capital intensive projects, such as infrastructure ones. In order to achieve this purpose, first a brief history of project finance and some distributive statistical findings in different industrial sectors has been presented. Then the financial model of a single cycle power plant being given to an independent power producer is built and its results reported.
In the next step, different categories of associated risk to this private power plant project are being identified, the critical variables captured and the risk simulated. Ultimately, risk mitigation is considered by studying and recommending right type of contracts as far as possible.
Keywords: Project finance, power plant, risk, contract.
…………………………………………………………………………………………………………………………
ÖZ: Bu çalışmanın amacı proje finansmanı, önemi ve büyük sermayeli projelerin finansmanını tanıtmaktır. Örneğin altyapı projeleri. Bu amaca ulaşmak için ilk olarak proje finansmanının kısa tarihçesi ve farklı endüstriyel sektörlerde bazı dağıtımsal istatistiksel bulgular sunulmuştur. Daha sonra tek çevrim santrali için kurulan finansal model ve sonuçları rapor edilmiştir.
Bir sonraki adımda özel güç santrali projesinin farklı kategorilerde ilişkili riskleri ve riskli değişkenleri tanımlanmış ve risk simule edilmiştir. Sonuç olarak, risk azaltma mümkün olduğunca doğru tipte sözleşmeleri çalışarak ve tavsiye ederek sağlanmıştır. Anahtar Kelimeler: Proje finansmanı, enerji santrali, risk, sözleşme.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Assist. Prof. Dr. Emine Atasoylu.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-10-30T14:25:23Z2014-10-30T14:25:23Z2011-09ThesisGourabi, Hamed Hosseinian. (2011). Occupational health and safety in Iran: Accident cost analysis and the importance of education in accident prevention. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1451en
oai:i-rep.emu.edu.tr:11129/14562014-11-04T00:00:50Zhdl_11129_13Occupational injuries and occupational safety and health regulations in three industries in North Cyprus, opportunities for improvement identifiedTopal, SabriyeIndustrial EngineeringIndustrial accidents - Labor supply - Industrial safety - Cyprus, NorthOccupational Injuries Occupational Accidents OSH Training OSH RegulationsABSTRACT: The aim of this study is to identify the occupational injuries and occupational safety and health (OSH) standards in three selected industries (construction, wood working and aluminum) in North Cyprus. The industrial sectors in need of attention were determined following an analysis of the data collected from the labor and social insurance office on the number of industrial accidents reported each year. In the past ten years, the highest number of accidents were reported from the construction industry followed by the production industry in general.
We used surveys designed to identify the extent to which the construction, woodworking and aluminum industries followed the rules and regulations stated in the OSH law requirements. Check lists were also used to identify possible OSH risks at construction sites.
The response rate to the employee surveys was 75% and the Minitab program was used for data analysis. 12.2% of construction workers responding to the survey reported having a serious accident on the job, 22.2% reported starting their job without any OSH training, 23.3% had no OSH training in the work place, 44% complained that their work place did not have first aid, 85% reported that safety belts were not used when working on scaffolds. 18.18% of aluminum workers responding to the survey reported having a serious accident on the job, 81.82% reported starting their job without any OSH training, 100% had no OSH training in the work place, 54.55% complained that they do not have any protective equipments to prevent falls, 72.73% reported that employers ensure that employees used personal protective equipment.
18.75% survey respondents in the woodworking industry reported having a serious accident on the job, 59.38% reported starting their job without any OSH training, 71.88% had no OSH training in the work place, 89.06% complained that their employer did not provide any written instruction about the equipments, 90.63% reported that their work place did not have any signage warning against obstacles or a risk of falls.
Some of the other work environment concerns raised by respondents included: repetitive activities that may lead to repetitive strain injuries and exposure to excessive heat, noise and dust.
This study shows that despite the presence of policies (Rules and Regulations) related to OSH, these policies were not adequately enforced, resulting in serious occupational illness. The implementation of systems to enforce these policies will be critical in preventing future occupational injuries and illnesses. Keywords: Occupational injuries, occupational accidents, OSH training, OSH regulations.
ÖZ: Bu çalışmanın amacı Kuzey Kıbrıs‟ta alüminyum, mobilya ve inşaat sektörlerinde iş kazaları ve iş sağlığı ve güvenliği standartlarını tanımlamaktır.
Bu çalışmada göz önünde bulundurulan sektörler, Çalışma ve Sosyal Güvenlik Bakanlığından alınan yıllık kaza istatistikleri ele alınarak seçilmiştir. Geçmiş on yıllın kaza raporlarına göre, en yüksek kaza oranı inşaat sektöründedir. Genel imalat sektörü ise inşaat sektörünü ikinci sırada takip etmektedir.
İş sağlığı ve güvenliği standartlarının uygulanıp uygulanmadığını değerlendirebilmek için anket soruları, yasa göz önüne alınarak hazırlanmıştır. Anketlere katılım oranı %75‟dir. Anketleri değerlendirmede Minitab program kullanılmıştır. İnşaat sektörü için ayrıca kontrol listelerinden faydalanılıp, değerlendirmeler yapılmıştır.
İnşaat sektöründe çalışan %12.2 çalışan, çalışma hayatları boyunca ciddi birer kaza geçirdiklerini bildirmiştir. %22.2 çalışan ise yaptıkları işe hiçbir iş sağlığı ve güvenliği eğitimi almadan başladıklarını savunmuşlardır. %23.3 ise iş yerinde iş sağlığı ve güvenliği ile ilğili eğitim almadıklarını bildirmiştir. %44 çalışan ise iş yerlerinde ilk yardım yeri bulunmadığını bildirmiştir. %85 çalışan ise yapı iskelelerinde çalışırken emniyet kemeri takmadıklarını bildirmişdir.
Aleminyum sektöründe çalışan %18.18 çalışan, çalışma hayatları boyunca ciddi birer kaza geçirdiklerini bildirmiştir. %81.82 çalışan ise yaptıkları işe hiçbir iş sağlığı ve güvenliği eğitimi almadan başladıklarını savunmuşlarıdır. Çalışanların tümü iş yerlerinde verilen iş sağlığı ve güvenliği eğitimlerinin tekrarlanmadığını savunurken, %54.55 çalışan işveren tarafından kendilerine ıslak zeminden düşmelerini önleyecek koruyucular verilmediğini bildirmiştir. %72.73 çalışan ise işverenlerinin koruyucuları düzenli olarak kullanıp kullanmadığını kontrol etmediklerini belirtmişlerdir.
İnşaat sektöründe çalışan %18.75 çalışan, çalışma hayatları boyunca ciddi birer kaza geçirdiklerini bildirmiştir. %59.38 çalışan ise yaptıkları işe hiçbir iş sağlığı ve güvenliği eğitimi almadan başladıklarını savunmuşlardır. %71.88 ise iş yerinde iş sağlığı ve güvenliği ile ilğili eğitim almadıklarını bildirmiştir. %89.60 işverenlerinin kendilerine kullandıkları ekipman ve makinalar için yazılı talimat vermediğni belirtmişlerdir. %90.63 çalışan, işyerinde düşmeleri önleyecek herhangi bir güvenlik rengi ya da işaret bulunmadığını belirtmişlerdir.
Bu çalışma gösteriyor ki iş sağlığı ve güveliği ile ilgili yasa ve tüzükler olmasına rağmen uygulama yetersizdir. Bu duruma bağlı olarak ciddi iş hastalıkları gözlenmektedir. Denetlemelerin yapılması, ileriki zamanlarda oluşabilecek iş hastalıklarını ve kazalarını önüne geçmesini sağlayacaktır.
Anahtar Kelimeler: İş hastalığı, iş kazaları, iş sağlığı ve güvenliği eğitimleri.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Assist. Prof. Dr. Emine Atasoylu.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-11-03T11:55:29Z2014-11-03T11:55:29Z2011-09ThesisTopal, Sabriye. (2011). Occupational injuries and occupational safety and health regulations in three industries in North Cyprus, opportunities for improvement identified. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1456en
oai:i-rep.emu.edu.tr:11129/15022014-11-20T00:00:43Zhdl_11129_13Ergonomical evaluation for the design of the computer laboratory PC Lab3 in the department of Industrial Engineering at EMU and proposing a better designDlhin, Faeza Saleh A.Industrial EngineeringAnthropometric Data, Percentiles, Ergonomy Design Criteria, LayoutABSTRACT: The aim of this study is evaluating both furniture and layout of the computer lab in the Industrial Engineering Department at EMU University and its effect on the student posture, performance and attention.
Fifty students were used as subjects. Their ages range between 18 to 35 years. Eleven
anthropometric data of the subjects were measured including: Stature, shoulder height,
shoulder elbow height, buttock popliteal length, popliteal height, knee height, forearm
hand length, hip width, elbow sitting height, sitting height and eye sitting height. The
mean, standard deviation, percentiles, minimum and maximum value of anthropometric
dimensions were calculated.
The current layout of the lab was evaluated by observing the number of workstations,
aisles, free areas available, placement of whiteboard and presentation screen. The
current layout was found to fail to comply with Ergonomy design criteria.
The results from hypotheses testing showed that there are significant differences
between male and female body dimensions.
A new design of furniture and a new layout for PC lab proposed to improve the level of
comfort and the level of attention to lectures for students.
Keywords: Anthropometric data, Percentiles, Ergonomy design criteria, layout.
…………………………………………………………………………………………………………………………
ÖZ: Bu çalısmanın amacı, Endüstri Mühendisligi DAÜ Üniversitesi Bölümü ve ögrenci
durus, performans ve dikkat üzerindeki etkisi bilgisayar laboratuvarı mobilya ve düzeni
hem de degerlendirmektedir.
Elli ögrenciler denek olarak kullanıldı. Yasları 18 ile 35 yıl arasında degismektedir. Boy,
omuz yüksekligi, omuz dirsek yüksekligi, kalça popliteal uzunluk, popliteal yükseklik,
diz yüksekligi, ön kol el uzunluk, kalça genisligi, dirsek oturma yüksekligi, yükseklik
oturma ve göz yüksekligi oturma: Deneklerin on antropometrik verileri dahil olmak
üzere ölçüldü.Ortalama, standart sapma, yüzdelik, minimum ve antropometrik boyutları
maksimum degeri hesaplanmıstır.
Laboratuar mevcut düzeni is istasyonları, koridorlar, bos alanlar, beyaz tahta ve sunum
ekranınızda mevcut düzeni yerlestirilmesi Ergonomi tasarım kriterleri uymadıgınız
bulunmustur sayısı gözlemleyerek degerlendirildi.
Hipotez testi elde edilen sonuçlar kadın ve erkek kasa ölçüleri arasında önemli
farklılıklar oldugunu göstermistir.
Mobilya ve bilgisayar laboratuarı için yeni bir düzen yeni bir tasarım konfor ve
ögrenciler için ilgi düzeyi düzeyini artırmak için önerdi.
Anahtar Kelimeler: Antropometrik veriler,Yüzdelik,Ergonomi tasarım kriterleri, düzen.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Assoc. Prof. Dr. Adham Mackieh.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-11-19T11:17:14Z2014-11-19T11:17:14Z2013-06ThesisDlhin, Faeza Saleh A. (2013). Ergonomical evaluation for the design of the computer laboratory PC Lab3 in the department of Industrial Engineering at EMU and proposing a better design. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1502en
oai:i-rep.emu.edu.tr:11129/15222014-11-26T00:00:55Zhdl_11129_13Logistic design and facility location for organ transplantation centersAzizi, Mohammad Taghi ValipourIndustrial EngineeringBusiness logistics - ManagementBusiness logisticsOrgan Transplantation, Logistic, Hospital, Transportation, Healthcare ModelingMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-11-25T12:33:00Z2014-11-25T12:33:00Z2013-06ThesisAzizi, Mohammad Taghi Valipour. (2013). Logistic design and facility location for organ transplantation centers. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1522en
oai:i-rep.emu.edu.tr:11129/15342014-11-27T00:00:44Zhdl_11129_13Analysis and performance measurement of existing solution methods of quadratic assignment problemKarami, MortezaIndustrial EngineeringQuadratic assignment problemQAPLIB, Branch and Bound, Simulated Annealing, Greedy Randomized Adaptive Search Procedure (GRASP)ABSTRACT: Quadratic Assignment Problem (QAP) is known as one of the most difficult combinatorial optimization problems that is classified in the category of NP-hard problems. Quadratic Assignment Problem Library (QAPLIB) is full database of QAPs which contains several problems from different authors and with different sizes. Many exact and meta-heuristic solution methods have been introduced to solve QAP. In this thesis we focus on four previously introduced solution method of QAP e.g. Branch and Bound (B&B), Simulated Annealing (SA) Algorithm, Greedy Randomized Adaptive Search Procedure (GRASP) for dense and sparse QAPs. The codes of FORTRAN for these methods were downloaded from QAPLIB. All problems of QAPLIB were solved by the above-mentioned methods. Several results were obtained from the computational experiments part. The Results show that the Branch and Bound method is able to introduce a feasible solution for all problems while Simulated Annealing Algorithm and GRASP methods are not able to find any solution for some problems. On the other hand, Simulated Annealing and GRASP methods have shorter run time comparing to the Branch and Bound method. The performance of the methods on the objective function value is discussed also.
Keywords: Quadratic Assignment Problem, QAPLIB, Branch and Bound, Simulated Annealing, Greedy Randomized Adaptive Search Procedure (GRASP).
…………………………………………………………………………………………………………………………
ÖZ: NP-zor problem kategorisinde sınıflandırılmış olan karesel Atama problemi (KAP) bilinen en zor birleşimsel optimizasyon problemidir. karesel Atama problem kütüphanesi (QAPLIB) birçok KAP veritabanı içerir ve bu veritabanlarının farklı yazar ve boyutları vardır. Birçok sezgi-ötesi çözüm yöntemleri KAP için tanımlanmıştır. Bu tezde, yoğun ve seyrek KAP için önceden tanımlanmış dört çözüm metotları olan; Dal sınır yöntemi, benzetim tavlama algoritması ve Greedy Randomized Adaptive Search Procedure (GRASP) vardır. Bu yöntemleri FORTRAN kodları KAP kütüphanesinden indirilmiştir. Bütün KAP kütüphanesindeki sorunlar bu yöntemleri çözülmüştür. Birtakım sonuçlar deneysel hesaplamalı kısımlar tarafından elde edilmiştir. Tüm problemler için Dal Sınır yöntemi, sonuçlara göre uygun bir çözümü tanıtmanın mümkün olabileceğini göstermektedir. Tavlama benzetimi algoritması ve GRASP‟ın bazı sorunlar için herhangi bir uygun çözüm bulması mümkün değildir. Buna rağmen, Tavlama Benzetimi ve GRASP Metotları, Dal Sınır yöntemine göre daha kısa bir .
Anahtar Kelimeler: Karesel Atama Problemi, karesel Atama Problem Kütüphanesi, Dal Sınır Yöntemi, Tavlama Benzetim Algoritması, Greedy Randomized Adaptive Search Procedure (GRASP).Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2014-11-26T06:35:04Z2014-11-26T06:35:04Z2013-06ThesisKarami, Morteza. (2013). Analysis and performance measurement of existing solution methods of quadratic assignment problem. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1534en
oai:i-rep.emu.edu.tr:11129/17652015-06-30T23:00:44Zhdl_11129_13Ergonomic Analysis of Repetitive Physical Workload in Dental workHanefioğlu, MügeIndustrial EngineeringMusculoskeletal system - Prevention - Dental WorkIndustrial safety - Human engineering - Ergonomics - Musculoskeletal systemMusculoskeletal discomfort, Dentists, electromyogramABSTRACT: The aim of this study is to determine musculoskeletal discomfort among dentists based on discomfort occurence in last 12 months and 7 days. The other goal is to identify musculoskeletal discomfort locally which has been occuring in dentists and examine the degree of influence to dentists. In this scope of study, a questionnaire survey is created and fulfilled by 67 dentists. The questionnaire survey is published on a website as a link form in order to reach dentists in various universities of the dentist group. Except for a small number of questionnaires filled out manually, it has been imported into the system. Survey results revealed that, Dentists’ most commonly used position of the dentist while performing their profession was static, and prolonged sitting / standing position.
Occurence of musculoskeletal discomfort in the last 12 months has seen mostly in neck, hand / wrist, upper back, and shoulder regions. Musculoskeletal discomfort seen mostly during the last 7 days as in elbows, feet, hip, and wrist / hand regions.
Electromyographic studies were applied on three dentists. These tests consist; endodontic treatment, dental filling therapy, fix prosthodontic, removable prosthodontic, dental examination, tooth cleaning treatment, and tooth extraction. In addition, the muscles activities are analyzed from six different region of the body which is determined based on questionnaire result.
Hypothesis testing was established for the analysis of electromyographic data which were collected from participant dentists while applying 7 different tasks (endodontic, dental filling therapy, tooth extraction, dental examination, and removable prosthodontics treatments). In most tests, hypothesis was rejected. As a result, discomfort occurrence in the body of the participants is observed which caused by the seven tasks. Finally, ANOVA was constructed and results were examined based on interaction between body and seven dental tasks which caused the discomforts in the dentists.
Keywords: Musculoskeletal discomfort, Dentists, electromyogram.
…………………………………………………………………………………………………………………………
ÖZ:Bu çalısmanın amacı, Dişhekimlerinin son 12 ayda ve son 7 günde yaşadıkları kas iskelet sistemi rahatsızlıklarını tanımlamaktır. Bir diğer amacı ise, Dişhekimlerinin yaşamakta olduğu kas iskelet sistemi rahatsızlıklarını bölgesel olarak tespit edip, etki derecelerini incelemektir.
Bu çalışma kapsamında bir anket hazırlanmış olup 67 dişhekimi tarafından doldurulmuştur. Anket, web sitesinde yayınlanarak çeşitli üniversitelerin dişhekimleri grubunda link olarak dişhekimlerine ulaşmıştır. Bunun haricinde çok az sayıda anket manual doldurulup, sistem içine aktarılmıştır. Anket sonuçlarına göre, Dişhekimlerinin mesleğini icra ederken en çok kullandıkları duruş sabit ve uzun süreli oturma/ayakta durma pozisyonu olarak çıkmıştır.
Son 12 ayda yaşanan kas iskelet sistemi rahatsızlıklarının en çok görülmekte olduğu bölgeler boyun, el/bilek, üst sırt, ve omuzlar olarak saptanmıştır. Son 7 günde yaşanan kas iskelet sistemi rahatsızlıkları en çok dirsek, ayaklar, kalça, ve bilek/el bölgelerinde görülmektedir.
Üç Dişhekimine elektromiyografi testi yapılmıştır. Bu testler; endodonti, dolgu, sabit protez, hareketli protez, muayene, diş temizleme, ve diş çekimi olarak, anket sonuçlarına göre belirlenip, vücudun altı değişik bölgesinden kas hareketleri incelenerek gerçekleştirilmiştir.
Elektromiyografik dataların analizi için Hipotez testi oluşturulmuştur. Teste katılan dişhekimleri yedi ayrı görevi uygularken alınmış olan veriler ANOVA tablosuna koyulup, hipotez testi yapılmıştır. Tüm hipotezler reddedilmiştir. Sonuç olarak, katılımcıların vücut bölgelerinde yaşadıkları rahatsızlıklara yedi görevin yol açtığını gözlemlenmektedir.
Son olarak yedi ayrı görevin dişhekimlerinin vücut bölgesiyle etkileşimi ANOVA tablosu yapılarak incelenmiştir. Diş hekimlerinin uygulamakta olduğu Endodonti, dolgu, diş çekimi, muayene, ve çıkarılabilir protez tedavilerinin, vücut bölgeleriyle etkileşerek kas-iskelet sistemi rahatsızlıklarına yol açtığı ortaya çıkmıştır.
Anahtar Kelimeler: Kas-iskelet sistemi rahatsızlıkları, Dişhekimleri, elektromiyografi.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2015-06-30T06:16:35Z2015-06-30T06:16:35Z2015-02ThesisHanefioglu, Muge. (2015). Ergonomic Analysis of Repetitive Physical Workload in Dental work. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1765en
oai:i-rep.emu.edu.tr:11129/17762015-06-30T23:00:51Zhdl_11129_13Application of Fuzzy AHP and Fuzzy TOPSIS in Selecting Proper Contractors: Case of Sistan and Baluchistan Province Gas CompanyRoudini, MehrdadIndustrial EngineeringIndustrial procurementProject ManagementContractor selection, analytic hierarchy process, TOPSIS, fuzzy set, triangular fuzzy numbersABSTRACT: The selection of contractors is, counted to be the most substantial decision of an employer before the execution of a project. During the recent years there have been many problems during the execution of projects leading to waste of lots of capitals. Yet, there is always a significant risk during the selection of contractors. In this research, legal limits and requirements in connection with the organization of governmental tenders are studied to determine effective factors on the selection of contractors by Sistan & Baluchistan Province Gas Company in Iran, and to present proper solutions to choose the most appropriate contractor.
A descriptive - measurement method is used for this research to gather information from experts of the company to analyze them in order to design a fuzzy model to assess if contractors are qualified or not. In this context, a fuzzy method of AHP (Analytic Hierarchy Process) is applied to determine weights of criteria and sub-criteria in selection of contractors. Then, the fuzzy method of TOPSIS (Technique for Order Preference by Similarity to Ideal Situation) is used to classify the top three contractors who achieved highest points of evaluation.
By applying fuzzy AHP method, the relative weight of executive records, good records, financial powers, technical and planning capacities, and equipment and machinery criteria are determined to be 0.215, 0.216, 0.205, 0.186, and 0.178 respectively. Three best qualified liable contractors are then selected based on the given scores in three conditions as the pessimistic, most likely and optimistic to the above criteria using fuzzy TOPSIS technique. The proposed model in this research, offers a systematic method to identify effective measures for evaluating competence of contractors and selection of contractors that involve and consider the employer's goals; as well as the type of project, available resources and executive constraints.
Keywords: Contractor selection, analytic hierarchy process, TOPSIS, fuzzy set, triangular fuzzy numbers.
…………………………………………………………………………………………………………………………
ÖZ: Bir projenin yürütülmesinden önce işverenin en önemli kararı müteahhitlerin seçimi olarak nitelendirilir. Son yıllarda projelerin yürütülmesi sırasında boşa giden birçok sermaye sorunu ortaya çıkmıştır. Ancak, müteahhitlerin seçimi sırasında her zaman önemli bir risk mevcuttur. Bu araştırma, kamu ihalelerine organizasyonu ile ilgili yasal limitler ve şartlar incelenerek İran Sistan Belucistan Eyaleti & Gaz Şirketi tarafından etkili faktörleri belirleyerek, en uygun müteahhhiti seçmek için uygun çözümlerin sunulmasını içermektedir.
Bu araştırmada bulanık bir model tasırımıyla müteahittlerin nitelikli olup olmadığını değerlendirmek için şirket uzamanlarından bilgi toplamak amaçlı bir tanımlayıcı ölçüm yöntemi kullanılmıştır.
Bu bağlamda, müteahhitlerin seçiminde kriter ve alt kriterlerin ağırlıklarını belirlemek için bir bulanık AHS (Analitik Hiyerarşi Süreci) yöntemi uygulanmıştır. Ardından, en yüksek puanı alan ilk üç müteahhiti sınıflandırmak için TOPSIS (İdeal Duruma Benzerlik için Sipariş Tercihi Tekniği) bulanık yöntemi kullanılmıştır.
Bulanık AHP yöntemi uygulayarak, yönetici kayıtları, iyi kayıtları, mali güç, teknik ve planlama kapasitelerinin ve ekipman ve makine ölçütlerinin göreli ağırlıkları sırasıyla 0.215, 0.216, 0.205, 0.186, ve 0.178 olmak üzere belirlenmiştir. Ardından bulanık TOPSIS tekniği kullanılarak yukarıdaki kriterlere verilen puanlarına göre; kötümser, büyük olasılıklı, ve iyimser olmak üzere üç tane en nitelikli sorumlu müteahhit seçilmiştir. Bu araştırmada önerilen model; işverenin hedeflerini dikkate müteahhitler seçimi yeterliliğini değerlendirmek için etkili önlemler belirlemek için sistematik bir yöntem sunmanın yanı sıra yanı sıra proje, mevcut kaynaklar ve yönetici kısıtlamaları içermektedir. Anahtar kelimeler: Müteahhit seçimi, Analitik Hiyerarşi Süreci, TOPSIS, üçgensel bulanık sayılar, bulanık dizgi.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2015-06-30T12:01:06Z2015-06-30T12:01:06Z2015-02ThesisRoudini, Mehrdad. (2015). Application of Fuzzy AHP and Fuzzy TOPSIS in Selecting Proper Contractors: Case of Sistan and Baluchistan Province Gas Company. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1776en
oai:i-rep.emu.edu.tr:11129/17772015-06-30T23:01:01Zhdl_11129_13A New Framework Based on EFQM to Achieve Continuous Improvement in Higher Education Institutions (HEIs)Mehrdad, SoltanifarIndustrial EngineeringTotal quality management - Eastern Mediterranean University - Famagusta (Cyprus, North)Higher Education - Quality Control - Cyprus, NorthContinuous improvement, Higher Education institutions, EFQM, Management commitmentABSTRACT: There is no room for doubt that effort to improve is necessary and inevitable in this fast pace of global changes. The aim of this thesis is to define a new framework to assess the levels of continuous improvement in Industrial Engineering Department of Eastern Mediterranean University as a case study. The thesis suggests that excellence models may be applicable to this department, although there are difficulties to verify the quality in Higher Education Institutions (HEIs). European Foundation for Quality Management (EFQM) excellence model was chosen to be implemented and evaluate the results. Both descriptive and analytical approach was adapted and the relevant data collected through questionnaires based on EFQM standard criteria, and analyzed by using SPSS 22. The questionnaires were distributed to a sample of 94 academic leaders (deans and chairs), staff (lecturers, assistants and administrative personnel) and students. The findings show that achieving excellence in Higher Education Institutions has some differences from business organizations. Furthermore, a new practice that increases management commitment in order to promote the process was suggested. This thesis expands the theoretical literature about continuous improvement in HEIs and offers some practical improvement projects.
Keywords: Continuous improvement, Higher Education institutions, EFQM, Management commitment.
…………………………………………………………………………………………………………………………
ÖZ: Bu tezin amacı Doğu Akdeniz Üniversitesi endüstri mühendisliği bölümünde var olan sürekli iyileştirme çabalarının değerlendirilebilmesi için yeni bir çerçeve tanımlamaktır. Çalışmada Avrupa Kalite Yönetimi Vakfı’nın (European Foundation for Quality Management - EFQM) mükemmellik modeli esas alınmış ve 94 personelden (dekan, bölüm başkanı, hoca, asistan, idari personel ve öğrenciden) anket yolu ile veriler toplanıp SPSS 22 ile değerlendirilmiştir. Bu çalışmada yükseköğretim kurumlarında mükemmelliğe ulaşmanın şirketlerinkinden farklı olduğu tespit edilmiş ve yükseköğretim kurum yöneticilerinin süreci daha iyiüstlenebilmeleri için bir öneride de bulunulmuştur. Bu tez yükseköğretim kurumlarında sürekli iyileştirme konusundaki kuramsal literatürü geliştirmenin ötesinde ayni konuda bazı pratik geliştirme önerilerinde de bulunmaktadır.
Anahtar Kelimeler: Sürekli iyileştirme, Yükseköğretim kurumları, EFQM, Yönetim taahhüdü.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Assist. Prof. Dr. Gökhan İzbırak.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2015-06-30T12:23:15Z2015-06-30T12:23:15Z2015-02ThesisSoltanifar, Mehrdad. (2015). A New Framework Based on EFQM to Achieve Continuous Improvement in Higher Education Institutions (HEIs). Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1777en
oai:i-rep.emu.edu.tr:11129/18132015-07-03T23:00:46Zhdl_11129_13Robot move scheduling in an FMCMosallaeipour, SamIndustrial EngineeringManufacturing industries - Assembly lines - Applications of digital computer systemsAssembly - line methods - Robots, IndustrialFlexible Manufacturing System Robot Centered Type FMS Job Scheduling Robot Cyclic Move SchedulingABSTRACT: In this study we deal with a cyclic schedule (the robot performs a set of activities and when the system returns to the initial state, the cycle is completed). A Flexible
Manufacturing Cell (FMC) with few numbers of machines is considered which processes parts in which the loading and unloading of the machines is made by a robot, this is a Flow Shop technology and robot serves the machines in a cyclic manner. The type of FMC is of Robot centered type. FMC may produce the same type of parts or different types of parts. The robot is scheduled and its move can be cyclic, so that we can define which type of movement of robot (as a result, loading / unloading sequence of machines) is more appropriate for our purpose (minimization the cycle time and maximization of outcomes).
This study contains a complete mathematical theory of determination of cycle time,
which is missing from the literature. In Chapter 3, the optimality condition of each
strategy of robot cyclic move is discussed and finally in last chapter, a lower bound for
the feasible scheduling strategy is obtained. Keywords: Flexible manufacturing system, robot centered type FMS, job scheduling, robot cyclic move scheduling.
…………………………………………………………………………………………………………………………
ÖZ: Bu çalışma döngüsel bir program ile ilgilidir(robot bir dizi etkinlikten gerçekleştirir ve
sistem başlangıç durumuna döndüğünde, döngü tamamlanır).Robotlar tarafından yapılan
yükleme, boşaltma ve işlemler Esnek Üretim Hücre (FMC) makinelerinin birkaçıyla
dikkate alınır.Bu BİR akış dükkanı teknolojisidir ve robot servis makineleri dairesel
şeklindedir.FMC'nın tipi Robot merkezli tiptedir. MYK parça veya parçaları farklı türde
aynı tip üretebilir. Robot planlanıyor ve onun haraketleri dairesel olabilir bu yüzden robotun haraketini tanımlayabiliriz ki (sonuç olarak, makinelerin yükleme boşaltma düzenleri) daha
uygundur bizim amacımız için (minimum döngü süresi ve maximum sonuçlar)
Bu çalışma literatürde eksik döngü zamanı, belirlenmesi tam bir matematiksel teorisi
içerir.Uygun planlama stratejisi için Bölüm 3, robot döngüsel hareket her stratejisinin
eniyilik durumu tartışılmış ve nihayet son bölümde ise, bir alt sınırı elde edilir.
Anahtar Kelimeler: Anahtar Kelimeler: Esnek üretim sistemi, robot merkezli tipi FMS, iş planlaması, robot döngüsel hareket zamanlama.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2011. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2015-07-03T05:09:56Z2015-07-03T05:09:56Z2012-06ThesisMosallaeipour, Sam. (2012). Robot move scheduling in an FMC. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/1813en
oai:i-rep.emu.edu.tr:11129/20482016-01-27T00:00:21Zhdl_11129_13Studies on different types of facility layout problemsNiroomand, Sadeghndustrial EngineeringOperations Engineering - Supermarkets Layout.Layout - Mathematical models.Facility Layout Problem Quadratic Assignment Problem Multi.Dimensional Scaling Mixed Integer Linear Model Supermarket Layout.Facility layout problems are applied to find the best arrangement of facilities in
manufacturing and service environments. The main goal of these problems is to
minimize the total weighted travelled distance of the facilities by the travelled
frequency of them. The difficult part is how to measure these distances. A frequently
used approximation is the Manhattan distance. However, it is significantly shorter
than the real distance in many cases. This thesis suggests an exact mathematical
model for closed loop layout that uses real distances instead of Manhattan distance.
Many feasible solutions are generated for benchmark problems that are competitive
with the solutions provided by metaheuristics. A generalization of multi-dimensional
scaling (MDS) method is developed to reconstruct the layout problems from their
distance matrix. MDS is a well-known method used in statistics to explore the hidden
dependency among data. The reconstruction done by MDS is completely successful
if the distance used in layout problems is of Euclidean type. Therefore the
generalized MDS provides the opportunity to reconstruct the layout problems with
any distance type. The results show that only the Quadratic Assignment Problems
which are the models of real layout problems can be reconstructed successfully. The
thesis also suggests a mathematical model based on Travelling Salesman Problem
and its Dantzig-Fulkerson-Johnson formulation to rearrange the departments of a
supermarket in order to increase the travelled path of customers and motivate them to
buy more items. The study was done in one of the biggest supermarket chain of
Hungary by considering the purchasing items of more than 13,000 customers. The
computational experiences show that the total travelled distance can be increased by approximately 4 percent.Öz:Tesis içi yerleşim, tesislerin üretim ve hizmet ortamlarında en iyi iç düzenlemesini
bulmak için uygulanmaktadır. Bu problemlerin temel amacı seyahat sıklığına göre
tesislerin toplam ağırlıklı seyahat mesafesini en aza indirmektir. Zor olan kısmı bu
mesafelerin nasıl ölçüldüğü ile bağlantılıdır. Manhattan mesafesi sık kullanılan bir
yaklaşıklamadır. Ancak birçok durumda gerçek mesafeden anlamlı derecede kısadır.
Bu tez, kapalı döngü iç yerleşimi için Manhattan mesafesi yerine gerçek mesafe
kullanmakta olan kesin sonuç veren bir matematiksel model önermektedir. Birçok
uygulanabilir çözüm sezgi ötesi yöntemlerle sağlanan çözümlere rakip olabilecek
denektaşı problemler için oluşturulmuştur. Genelleştirilmiş bir çok boyutlu ölçekleme
metodu, tesis içi yerleşim problemlerini mesafe matrislerinden yeniden kurmak için
geliştirilmiştir. Çok boyutlu ölçekleme, veriler arasındaki gizli bağlantıyı keşfetmek
için istatistikte kullanılan bilinen bir yöntemdir. Çok boyutlu ölçekleme ile yeniden
kurma, iç yerleşim probleminin öklit türü olması durumunda tamamen başarılıdır. Bu
nedenle genelleştirilmiş çok boyutlu ölçekleme herhangi bir mesafe tipi olan iç
yerleşim problemlerinin yerinden kurulması fırsatı yaratır. Sonuçlar göstermektedir
ki sadece gerçek iç yerleşim problemlerinin modeli olan karesel atama problemleri
başarılı bir şekilde yeniden kurulabilmektedir. Bu tez ayni zamanda müşterilerin
süpermarkette daha fazla ürün almaları yönünde motive olmaları amacıyla katettikleri
mesafeyi artırmak için gezgin satıcı problemi ve onun Dantzig-Fulkerson-Johnson
biçimlendirmesini baz alarak süpermarket departmanlarının yeniden düzenlemesini
sağlayan bir matematiksel model önermektedir. Bu çalışma Macaristanda bulunan en
büyük süpermarket zincirlerinden birinde, 13000‘den fazla müşterinin satın aldığı
ürünler dikkate alınarak yapılmıştır. Hesaplamalı denemeler göstermektedir ki toplam seyahat edilen mesafe yaklaşık yüzde 4 oranında artırılabilmektedir.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)2016-01-26T08:56:15Z2016-01-26T08:56:15Z2013-01ThesisNiroomand, Sadegh. (2013). Studies on different types of facility layout problems. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprushttp://hdl.handle.net/11129/2048en
oai:i-rep.emu.edu.tr:11129/21192016-02-18T00:00:11Zhdl_11129_822The Journey-Inter Continental ConcertsMosallaeipour, SamMohseni Zonoozi, ShahedInter Continental ConcertsThe JourneyThe First music album booklet of Inter Continental ConcertsEastern Mediterranean Universityhttp://intercontinentalconcerts.org/2016-02-17T06:12:44Z2016-02-17T06:12:44Z2016-01-01Otherhttp://intercontinentalconcerts.org/http://hdl.handle.net/11129/2119en1-90394-07842-3;info:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/21202016-04-15T05:21:46Zhdl_11129_398Inter Continental Concerts catalog - 2014Mosallaeipour, SamMohseni Zonoozi, ShahedInter Continental ConcertscatalogEastern Mediterranean UniversityThe Catalog of Inter Continental Concertshttp://intercontinentalconcerts.org/2016-02-17T06:16:38Z2016-02-17T06:16:38Z2016-01-01Otherhttp://intercontinentalconcerts.org/WGAW#1724514http://hdl.handle.net/11129/2120eninfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/22042016-03-08T00:00:31Zhdl_11129_13Investigating Gap between Customers’ Taste and Market Variety and its Impact on the Customer Satisfaction: An Empirical Study in the Automotive IndustryMousavi, Seyed FarhadIndustrial EngineeringCustomer RelationsCustomer PreferencesUtility functionCustomer behaviorMicroeconomicsExpectationPerceived QualityCustomer SatisfactionModeratingConditional CorrelationThis study investigates and examines the gap between customer preferences and market variety in the Iranian automobile market and its impacts on customer satisfaction. A linear approximation is used for the utility function of customers of the Iranian carmaker (Iran Khodro Co). Also the SERVQUAL model for measuring customer satisfaction is used to determine, the gap between customer expectation and perceived quality. The moderator variable called “Role of car in the customer life” is introduced and its effect on the relationships between customer expectation, perceived quality and customer satisfaction is evaluated.
The results show that considering the history of car sales over the past five years compared with the value predicted by the existing car market share, a significant gap between the current sales of IKCO and a product assortment ideally adapted to the customers is detected. The highest gap occurred between the level of expectation and the perceived quality of factors, respectively belonging to sale, car accessories, technical and physical aspects and the after-sale services. In this way, companies can elaborate better strategies and production plans and can increase their market share.
As a contribution, this study provides a method for identifying customer behavior based on choices among options consisting of a set of qualitative and quantitative factors. So the method presented in this study can be used to empower automakers corporations to increase their competitive advantage and create the readiness to enter and compete in global market. This could prevent decline in automakers share and increase their profitability through achieving customer satisfaction.
We live in a dynamic and changing environment. Changes in customer tastes and purchasing power; Changes in technical standards specifically regulations related to polluting potential of cars and tariff regulations; Changes in market structure toward openness to global market and increasing competition, could reduce the applicability of this research results. So these are open questions for future researches. Also as a topic for further research, the number of vehicles and factors types can be changed to evaluate the market share. Also, the effect of the moderator variable on customer satisfaction for other useable products and services may be investigated.Öz:Bu çalışma İran otomobil piyasasındaki müşteri tercihleri ve pazar çeşitliliği arasındaki boluğu ve bunun müşteri memnuniyeti üzerindeki etkisini araştırmakta ve incelemektedir. İranlı otomobil üreticisi (İran Khodro Co) müşterilerinin yarar fonksiyonu için doğrusal bir yaklaşım kullanılmıştır. Ayrıca müşteri beklenti ve algılanan kalite arasındaki boşluğu belirlemek ve müşteri memnuniyetini ölçmek için SERVQUAL modeli kullanılmıştır. "Müşteri hayatında arabanın rolü" adlı moderatör değişken olarak tanıtılarak müşterinin beklentisi, kalite algısı ve müşteri memnuniyeti üzerindeki etkisi değerlendirilmiştir.
Sonuçlar, son beş yıl içerisindeki otomobil satışlarıyla mevcut araç pazar payı içerisindeki değeri karşılaştırıldığında, IKCO’nun mevcut satış ve ideal müşterilerine uyarlanmış bir ürün yelpazesi arasında anlamlı bir fark tespit edilmiştir. En büyük fark, satış, araba aksesuarları, teknik be fiziksel donanım ve satış sonrası hizmetlerin beklenti düzeyi ve kalite faktör algıları arasında meydana gelmiştir. Bu şekilde, şirketler daha iyi strateji ve üretim planlarını hazırlayarakmak pazar paylarını artırabileceklerdir.
İleri bir araştırma konusu olarak, araç ve faktör türlerinin sayısı değiştirilerek pazar payı değerlendirilmesi önerilmektedir. Ayrıca, diğer kullanışlı ürün ve hizmetler için müşteri memnuniyeti moderatör değişkenin etkisi araştırılabilir.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2016-03-07T06:11:18Z2016-03-07T06:11:18Z2015-042015doctoralThesisMousavi, Seyed Farhad.(2015).Investigating Gap between Customers’ Taste and Market Variety and its Impact on the Customer Satisfaction: An Empirical Study in the Automotive Industry. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/2204enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/22512016-03-10T00:00:51Zhdl_11129_13Noise Reduction in a Plastic Recycling Plant a Case Study in LebanonEzzeddine, MazenIndustrial EngineeringNoise contro l- Industrial noiseNoise exposurehearing lossOccupational Health and SafetyThe aim of this study is to investigate the noise levels in a plastic recycling plant representing the medium sized industries in Lebanon in order to generalize the case in Lebanese industry.
No prior study has been done on industrial noise exposure in Lebanon. The occupational Health and Safety rules in Lebanon states that handling high noise levels, watching individual exposure and reducing long shifts are the responsibility of the employer. It was noted that in this company none of the regulations are being followed.
Being exposed to high noise level can cause different health problems such as stress, speech interference, high blood pressure, temporary or permanent hearing loss and sleeping problems.
Sound level meter was used to measure sound in the factory. Questionnaires were distributed to workers as well and their structure was designed to determine the hazards of high noise levels on workers. Occupational Health and Safety standards were used as a guiding reference in the analysis. The data was analyzed using statistical package for the social science program (SPSS).
The data obtained from the distributed questionnaires confirmed the noise levels measured inside the plant. Workers have proved being annoyed by the high noise levels.Future studies can be applied by using a dosimeter to a check the noise level in the plant or in many other plants in Lebanon and therefore generalize the case of industries in this countryÖZ:
Bu çalışmanın amacı Lübnan’daki orta ölçekli sanayileri temsilen bir plastik geridönüşüm fabrikasındaki gürültü seviyelerini incelemek ve bu vakayı Lübnan sanayisi için genellemektir.
Lübnan’da daha önce endüstriyel gürültü maruziyeti üzerine herhangi bir çalışma yapılmamıştır.Lübnan’daki mesleki sağlık ve güvenlik kurallarına göre; yüksek gürültü seviyelerini idare etmek, kişisel maruziyeti takip etmek ve uzun vadiyaları azaltmak işverenin sorumluluğundadır. Bu çalışmadaki firmanın, bahsedilen düzenlemelerin hiçbirini uygulamadığı belirlenmiştir.
Yüksek gürültü seviyesine maruz kalmak; stress, konuşma bozukluğu, yüksek tansiyon, geçici veya kalıcı işitme kaybı ve uyku problemleri gibi sağlık sorunlarına neden olmaktadır.
Fabrika içerisindeki gürültüyü ölçmek için ses seviyesi ölçüm cihazı kullanılmıştır. İşçilere anket dağıtılarak yüksek gürültü seviyesinin işçiler üzerinde yarattığı tehlikelerin ölçülmesi hedeflenmiştir. Bu çalışmada İş Sağlığı ve Güvenliği standardları kılavuz kaynak olarak kullanılmıştır. Toplanan veri SPSS kullanılarak analiz edilmiştir.
Dağıtılmış olan anketlerden toplanan veri, fabrika içerisinde ölçülen yüksek gürültü seviyesini teyit etmiştir. İşçilerin yükske gürültü seviyesinden dolayı rahatsız oldukları kanıtlanmıştır.
İleriki çalışmalarda dozimetre kullanılarak bu fabrikadaki gürültü şiddeti control edilebilir veya Lübnan’daki diğer fabrikalarda gürültü şiddeti ölçülerek, bu ülkede bulunan sanayideki gürültü sorunları incelenebilinir.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Korhan, Orhan2016-03-09T14:00:58Z2016-03-09T14:00:58Z2015-072015masterThesisEzzeddine, Mazen. (2015). Noise Reduction in a Plastic Recycling Plant a Case Study in Lebanon . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus. (2015).http://hdl.handle.net/11129/2251enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24382016-04-15T23:00:13Zhdl_11129_398Inter-Continental Concerts catalog - 2015Mosalaeipour, SamMohseni Zonoozi, ShahedIntercontinental ConcertsSam MosallaeipourShahed Mohseni Zonoozihttp://intercontinentalconcerts.org2016-04-15T05:08:51Z2016-04-15T05:08:51Z2016-01-01otherhttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2438enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24392016-04-15T23:00:11Zhdl_11129_398Inter Continental Concerts: The Journey Music AlbumSam, MosallaeipourShahed, MohsenizonooziIntercontinental ConcertsSam MosallaeipourThe JourneyShahed Mohseni Zonoozihttp://intercontinentalconcerts.org2016-04-15T05:13:46Z2016-04-15T05:13:46Z2016-01-01recording, musicalhttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2439info:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24402016-04-15T23:00:39Zhdl_11129_398Inter Continental Concerts: Cyprus Lives 2012 to 2014 Music AlbumSam, MosallaeipourShahed, MohsenizonooziIntercontinental ConcertsSam MosallaeipourShahed Mohseni ZonooziCyprus Liveshttp://intercontinentalconcerts.org2016-04-15T05:16:37Z2016-04-15T05:16:37Z2016-01-01recording, musicalhttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2440enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24412016-04-15T23:00:15Zhdl_11129_3981st Inter-Continental Concert: The Reunion of the LegendsMosallaeipour, SamMohseni Zonoozi, ShahedIntercontinental ConcertsThe reunion of the legendsSam MosallaeipourShahed Mohseni ZonooziMusical Record, Concert Videohttp://intercontinentalconcerts.org2016-04-15T05:27:30Z2016-04-15T05:27:30Z2012-10-28videohttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2441enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24422016-04-15T23:00:26Zhdl_11129_3982nd Inter-Continental Concert: The Cyprus StationMosallaeipour, SamMohseni Zonoozi, ShahedSam MosallaeipourShahed Mohseni ZonooziThe Cyprus StationMusical Record, Videohttp://intercontinentalconcerts.org2016-04-15T05:30:19Z2016-04-15T05:30:19Z2013-06-01videohttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2442enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24432016-04-15T23:00:45Zhdl_11129_3983rd Inter-Continental Concert: Eternal LoveMosallaeipour, SamMohseni Zonoozi, Shahedeternal loveSam MosallaeipourShahed Mohseni ZonooziMusical Record, Concert Videohttp://intercontinentalconcerts.org2016-04-15T06:12:23Z2016-04-15T06:12:23Z2015-06-01videohttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2443enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24442016-04-15T23:00:39Zhdl_11129_398The Fellowship of EMUMosallaeipour, SamMohseni Zonoozi, ShahedEastern Mediterranean UniversityEMUThe FellowshipThe Fellowship of EMUSam MosallaeipourShahed Mohseni ZonooziMusical Record, Concert Videohttp://intercontinentalconcerts.org2016-04-15T06:16:54Z2016-04-15T06:16:54Z2013-12-05videohttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2444enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/24452016-04-15T23:00:39Zhdl_11129_397Inter-Continental Concerts: 8th EuPRA ConferenceSam, MosallaeipourShahed, MohsenizonooziEuPRA ConferenceIntercontinental ConcertsSam MosallaeipourShahed Mohseni ZonooziEuPRAConferencehttp://intercontinentalconcerts.org2016-04-15T07:31:07Z2016-04-15T07:31:07Z2013-11conferenceObjecthttp://intercontinentalconcerts.orghttp://hdl.handle.net/11129/2445enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/28492016-07-19T03:49:07Zhdl_11129_820A model for occupational injury risk assessment of musculoskeletal discomfort and their frequencies in computer usersKorhan, OrhanMackieh, AdhamMOUSE USE, OPERATIONS RESEARCH & MANAGEMENT SCIENCEENGINEERING, INDUSTRIAL,Work-related musculoskeletal disorders,Office ergonomics, Musculoskeletal discomfortOccupational injuries pose a major problem in workplaces where computers are widely used. Intensive, repetitive and long period computer use results in costly health problems (direct cost), and lost productivity (indirect cost). Yet, the effect of musculoskeletal discomfort and their frequencies associated with the use of computers have not received considerable attention. This paper presents the findings of a risk assessment model through a scientific research to determine the effect of discomfort factors that contribute to musculoskeletal disorders resulting from intensive use of computers in the workplaces. In this context a questionnaire was given to 130 intensive computer users working in the university sector. A list of significant predictor variables for musculoskeletal disorders was developed to assess and analyze workplace ergonomics, worker attitudes and experiences on computer keyboard and mouse. The main focus of the current research is to seek and provide evidence that symptoms of musculoskeletal discomfort and the frequency of these symptoms are significant in the development of work-related musculoskeletal disorders (WRMSDs). This study provides the evidence that, ache and pain are the most common types of discomforts in all body regions. The discomforts were more pronounced at neck, shoulder, upper back, hand/wrist, and lower back regions. The risk factors determined by the risk assessment model were validated through ANOVA of the sEMG records for the control and test groups. The findings indicated that for each test group respondent, the mean musculoskeletal strain experienced differs in time, but the same is not true for the control group.Due to copyright restrictions, the access to the publisher version (published version) of this article is only available via subscription. You may click URI and have access to the Publisher Version of this article through the publisher web site or online databases, if your Library or institution has subscription to the related journal or publication.Elsevier2016-07-19T03:49:07Z2016-07-19T03:49:07Z2010articleKorhan, O., Mackieh, A. A Model for Occupational Injury Risk Assessment of Musculoskeletal Discomfort and Their Frequencies in Computer Users.0925-7535(print)1879-1042(online)http://dx.doi.org/10.1016/j.ssci.2010.03.010http://hdl.handle.net/11129/2849487868877eng10.1016/j.ssci.2010.03.010Safety Scienceinfo:eu-repo/semantics/closedAccess
oai:i-rep.emu.edu.tr:11129/28482016-07-19T03:45:34Zhdl_11129_820Expert System Assessment of Work-Related Musculoskeletal Disorders for Video Display Terminal UsersSeyed, Mahdi ShavaraniKorhan, OrhanCLIPSComputer useOccupational injuriesintelligent diagnosis Ergonomic interventionUsing computers for long durations and repetitively lead to costly health problems and reduced productivity among computer users. One of the best preventive actions is proved to be ergonomic interventions. However consulting ergonomics experts would be very expensive especially due to the fact that such interventions should be repeated periodically. Expert systems (ES) can be the solution for dealing with these problems. A rule-based expert system to analyze and evaluate the working conditions of computer users by ergonomics standards was designed. The knowledge base of this expert system was acquired from OSHA’s and Washington state ergonomic standards. Knowledge base is the source of information used to build an expert system. CLIPS was used to construct this ES. Risk factors which lead to formation of WRMSDs were identified; the computer user was aimed to be notified about the existence of WRMSDs hazards in the workplace, and was guided to avoid WRMSDs risk factors. After having this ES available to 100 computer users and analyzing the results, the effectiveness of the constructed ES was validated through comparing the ES outcome with OSHA standards. The significance of this study is to help the organizations to overcome costly health damages and productivity-reduction and making expert instructions available to everyone.Due to copyright restrictions, the access to the publisher version (published version) of this article is only available via subscription. You may click URI and have access to the Publisher Version of this article through the publisher web site or online databases, if your Library or institution has subscription to the related journal or publication.Springer2016-07-19T03:45:33Z2016-07-19T03:45:33Z2015articleShavarani, M., Korhan, O., 2014. Expert System Assessment of Work-Related Musculoskeletal Disorders for VDT Users.1871-2584(print)1871-2576(online)http://dx.doi.org/10.1007/s11482-014-9307-5http://hdl.handle.net/11129/2848102205210eng10.1007/s11482-014-9307-5Applied Research in Quality of Lifeinfo:eu-repo/semantics/closedAccess
oai:i-rep.emu.edu.tr:11129/28572016-08-18T06:50:32Zhdl_11129_820Multi-attribute Decision Making: An Application of the Brown-Gibson Model of Weighted EvaluationFeridun, MeteKorhan, OrhanÖzakça, ArifBrown-Gibson modelMulti-attribute Decision MakingThis study applies Brown-Gibson model of weighted evaluation of both objective and subjective parameters for automobile selection. In addition to the input from the NPV calculations, we set 15 subjective attributes and estimate the best investment strategy based on the objective and subjective factors. Results obtained from NPV and Brown-Gibson model are inconsistent. Further evidence suggests that mileage is the most sensitive influencing factor while making the investment decision and even a small change in this factor changes the decision completely from one alternative to another.Due to copyright restrictions, the access to the publisher version (published version) of this article is only available via subscription. You may click URI and have access to the Publisher Version of this article through the publisher web site or online databases, if your Library or institution has subscription to the related journal or publication.Asian Network for Scientific Information2016-08-18T06:50:32Z2016-08-18T06:50:32Z2005article1812-5654(print)1812-5662(online)http://dx.doi.org/10.3923/jas.2005.850.852http://hdl.handle.net/11129/285755850852eng10.3923/jas.2005.850.852Journal of Applied Sciencesinfo:eu-repo/semantics/closedAccess
oai:i-rep.emu.edu.tr:11129/28582016-08-18T23:00:39Zhdl_11129_394Work-Related Musculoskeletal Discomfort in the Shoulder due to Computer UseKorhan, Orhanmusculoskeletal system,symptoms include heredityblood vesselspregnancy, poor diet, and lifestyle.The National Institute for Occupational Safety and Health (NIOSH, 1997) in the USA defines
Musculoskeletal Disorder (MSD) as a disorder that affects a part of the body’s
musculoskeletal system, which includes bones, nerves, tendons, ligaments, joints, cartilage,
blood vessels and spinal discs. These are the injuries that result from repeated motions,
vibrations and forces placed on human bodies while performing various job actions. The
individual factors that can contribute to musculoskeletal symptoms include heredity,
physical condition, previous injury, pregnancy, poor diet, and lifestyle.
Work-related musculoskeletal disorders occur when there is a mismatch between the physical
requirements of the job and the physical capacity of the human body (Korhan, 2010).
Musculoskeletal disorders are work-related when the work activities and work conditions
significantly contribute to their occurrence, but not necessarily the sole or significant
determinant of causation. Work-related musculoskeletal disorders (WRMSDs) describe a wide
range of inflammatory and degenerative conditions affecting the muscles, tendons, ligaments,
joint, peripheral nerves, and supporting blood vessels. These conditions result in pain and
functional impairment and may affect especially the shoulder (Westgaard, 2000).The file in this item is the publisher version (published version) of the article.Open Access Publisher2016-08-18T06:52:52Z2016-08-18T06:52:52Z2012bookParthttp://cdn.intechopen.com/pdfs-wm/35812.pdfhttp://hdl.handle.net/11129/28583151engErgonomics – A Systems Approachinfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/28592016-08-18T06:56:58Zhdl_11129_820Posture, Musculoskeletal Activities, and Possible Musculoskeletal Discomfort Among Children Using Laptops or Tablet Computers for Educational Purposes: A Literature ReviewKorhan, OrhanScience Education, Musculoskeletal (MSK) discomfortEducation, Mobile technologies, ChildrenEducational Technology, Educational ergonomicsWISE USE, EDUCATION, SCIENTIFIC DISCIPLINES,Educational ergonomics focuses on the interaction between educational performance and educational design. By improving the design or pointing out the possible problems, educational ergonomics can be utilized to have positive impacts on the student performance and thus on education process. Laptops and tablet computers are becoming widely used by school children and beginning to be used effectively for educational purposes. As the latest generation of laptops and tablet computers are mobile and lightweight compared to conventional personal computers, they support student-centred interaction-based learning. However, these technologies have been introduced into schools with minimal adaptations to furniture or attention to ergonomics. There are increasing reports of an association between increased musculoskeletal (MSK) problems in children and use of such technologies. Although children are among the users of laptops and tablet computers both in their everyday lives and at schools, the literature investigating MSK activities and possible MSK discomfort regarding children using portable technologies is limited. This study reviews the literature to identify published studies that investigated posture, MSK activities, and possible MSK discomfort among children using mobile technologies (laptops or tablet computers) for educational purposes. An electronic search of the literature published in English between January 1994 and January 2014 was performed in several databases. The literature search terms were identified and combined to search the databases. The search results that the resources investigating MSK outcomes of laptop or tablet use of children are very scarce. This review points out the research gaps in this field, and identifying areas for future studies.Due to copyright restrictions, the access to the publisher version (published version) of this article is only available via subscription. You may click URI and have access to the Publisher Version of this article through the publisher web site or online databases, if your Library or institution has subscription to the related journal or publication.Springer Netherlands2016-08-18T06:56:58Z2016-08-18T06:56:58Z2014article1059-0145(print)1573-1839(online)http://dx.doi.org/10.1007/s10956-014-9505-9http://hdl.handle.net/11129/2859235605616eng10.1007/s10956-014-9505-9Journal of Science Education and Technologyinfo:eu-repo/semantics/closedAccess
oai:i-rep.emu.edu.tr:11129/28612016-08-18T23:00:34Zhdl_11129_820An empirical investigation of the detrimental effects of the intensive use of computers in the business worldKorhan, OrhanMackieh, AdhamMANAGEMENT, MOUSE USE, INJURIESUPPER-LIMB, VDT USERS, NECKCARPAL-TUNNEL-SYNDROMErisk assessment modelling, DISCOMFORT, BUSINESSOccupational injuries pose a major problem in workplaces where computers are widely used. Intensive, repetitive and long period computer use results in costly health problems (direct cost), and lost productivity (indirect cost). This paper presents the findings from a scientific research to determine the effect of musculoskeletal discomfort factors that contribute to musculoskeletal disorders resulting from intensive use of computers in the workplaces. In this context, a questionnaire was given to 84 intensive computer users working for the university sector in North Cyprus. The present article aims at investigating the factors that contribute to such disorders using a questionnaire and a mathematical model, which is developed by assessing and analyzing workplace ergonomics, worker attitudes and experiences on computer use. The findings from this study shows that the gender (OR=3.37, CI: 2.38-4.77), psychosocial factors (like working with computers, OR=0.050, CI: 0.001-0.623), office ergonomics qualities such as availability of foot support [OR= 0.295, CI: 0.092-0.041] and availability of sufficient lightening [OR=3.477, CI:1.232-9.810] were significant factors of the formation of work-related musculoskeletal disorders (WRMSDs). Additionally, it was shown that physical exposures are associated with increased risk of upper extremity disorders. The current research also provides an evidence that the symptoms of musculoskeletal discomfort (such as pain), and the frequency of these symptoms were also significant in the development of WRMSDs.The file in this item is the publisher version (published version) of the article.Academic Journals2016-08-18T07:10:22Z2016-08-18T07:10:22Z2011article1993-8233http://hdl.handle.net/11129/286153656665eng10.5897/AJBM09.331African Journal Of Business Managementinfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/29882016-10-11T23:00:38Zhdl_11129_13Effect of Supplier’s Assessment on Waste PreventionSadegh, NasimIndustrial EngineeringIndustrial Waste - Managemen - Environmental AspectsSupply chainSupply chain management PracticeWaste managementEnvinromentSince the industrial revolution, the natural resources have been exploited vigorously throughout the world. Therefore, governments and customers force organizations to produce more economic, sustainable and green items. Beyond the financial, social and legal perspective, producers are challenged by environmental constraints while manging their supply chain.
A questionnaire was specifically designed in this research and submitted to company managers and to both business related and unrelated suppliers. Therefore, this study considers the effect of selection, incentive and development of suppliers.
Behavioral, structural and economic barriers, which may lead to some restrictions are also investigated in this research. Moreover, the difference of opinion between related suppliers and unrelated suppliers is studied by using hypothesis testing.
This research revealed that 95% of managers finds supplier development as the most effective motivation towards waste prevention, and 50% of them thinks economic barrier limits the supplier practices. This can be concluded that supplier development has the most positive effect on waste prevention and economic barrier has considered as the strongest barrier. Furthermore, there were difference of opinion between related and unrelated suppliers with regards to incentive and selection practices (p<0.05).
Keywords: Supply chain, Supply chain management Practice, Waste management, EnvinromenÖZ:
Sanayi devriminden itibaren, dünya genelindeki doğal kaynaklar aşırı bir şekilde tüketilmektedir. Bu nedenle, hükümetler ve müşteriler ticari kurumları daha ekonomik, sürdürülebilir ve yeşil ürünler üretmeleri konusunda zorlamaktadır. Finansal, sosyal ve yasal unsurların yanısıra, tedarik zinciri yönetimin sürecinde üreticiler çevre kısıtları için de çabalamaktadırlar.
Firma yöneticileri ve hem isle ilgili, hem de ilgisiz tedarikçilere dağıtılmak üzere bu çalışmaya özgün bir anket hazırlanmıştır. Böylece, bu çalışma tedarikçi seçimi, teşviği ve gelişimiyle ilgili etkileri içermektedir.
Bazı sınırlandırmalara yol açabilecek davranışsal, yapısal ve ekonomik engeller bu çalışma kapsamında incelenmiştir. Ayrıca, ilgili ve ilgiliz tedarikçiler arasındaki fikir farklılıkları hipotez testi kullanılarak araştırılmıştır.
Bu çalışma yöneticilerin %95’inin tedarikçi gelişiminin atıkların önlenmesi için en önemli sebep olduğunu ve %50’sinin ekonomik engellerin tedarikçi faaliyetlerini engellediğini düşündüğünü ortaya çıkarmıştır. Bu sonuç; tedarikçi gelişiminin atıkların önlenmesi konusuda en olumlu etki olduğunu ve ekonomik engellerin de en güçlü engel olduğunu göstermiştir. Bundan başka, teşvik ve seçim uygulamalarında ilgili ve ilgisiz tedarikçiler arasında fikir farklılığı tespit edilmiştir (p<0.05)
Anahtar Kelimeler: Tedarik zinciri, Tedarik Zinciri Yönetimi Uygulaması, Atık Yönetimi, ÇevreMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Korhan, Orhan2016-10-11T04:15:23Z2016-10-11T04:15:23Z2016-022016masterThesisSadegh, Nasim. (2016). Effect of Supplier’s Assessment on Waste Prevention. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/2988enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/33892017-08-09T23:00:36Zhdl_11129_13Ranking All Units in DEAAlirezamohammadi, MehrdadIndustrial EngineeringDecision Making - Industrial EngineeringData envelopment analysisdecision making unitrankData Envelopment Analysis (DEA) is a methodology to compare efficiency of Decision Making Units (DMUs). DEA is an extension of Charnes, Cooper and Rhodes work by introducing CCR model in 1978. Ranking DMUs is one of the main purposes of DEA in management and engineering. DEA evaluates some DMUs with efficiency score one as efficient DMUs and we therefore need to produce a reliable method for fully ranking DMUs. Some methods have been proposed in this concept and newly Khodabakhshi and Aryavash (2012) ranked DMUs relative to their combined maximum and minimum efficiency scores where efficiency is defined as ratio of weighted sum of outputs to weighted sum of inputs. Due to some obtained weights (multipliers) in DEA may be zero, previous methods have low ability in ranking DMUs because of eliminating the effect of corresponding input and outputs on DEA evaluations. We expand their method by assigning lower bounds on multipliers using facet analysis and then we propose an equitable and precise method for ranking all DMUs based on the modified CCR.
Keywords: Data envelopment analysis, decision making unit, rank.ÖZ:
Veri zarflama analizi, karar alma birimlerinin etkinlik lerini karşilaştirmaya yarayan. Veri zarflama analizi Charnes, Cooper ve Rhodes un 1978 de ki CCR model adinda ki çalışmalarinin geliştilirmiş halidir. Veri zarflama analizin karar alma birimlerinin sıralaması, mühendisilik ve işletme alanlarında ki esas konulardandir. Çoğu zaman veri zarflama analizi birden fazla etkili Kara Alma Birimi tanimlamasi için onlarin arasinda güvenilir ve bütünsel bir sıralama zorunluluğu söz konusu olabilir. Bu nedenle bazı methodlar Veri Zarflama Analizi modellerini, esasında karar alma birimlenin sıralama amacı ile tanimlanmışdir. Yakın zamanda Khodabakhshi ve Aryavash (2012) karar alma birimlerinin en yüksek ve en düşük verim puanlamalarının kombinasyon esasında sıralamayı başarmışlardır. Tanımlanan ışlemde etki, toplam ağırlıklı çıktıların, toplam ağırlıklı girdilere oranı ile ifade edilir. Ama bazen Veri Zarflama Analizi sonuçlarında bazı cıktıları ve girdilerinin ağırlıklarının sıfır olması bundan önceki methotların özellikle Khodabakhshi ve Aryavash methodunun düşük performansina sebeb olmaktadır. bundandolayı bu tür verilerin tesiri sıralama sonuçlarında ihmal ediliyor. Bu tezde Khodabakhshi ve Aryavash metodunun genişletilip, bunu yüzey analizi aracılığıyla, modelde yeralan ağırlıklara aşağıdan sınırlamak prensibiyle, sonraki aşamada değiştirilmiş CCR modeline dayanarak kesin bir karar alma birimini sıralama methotu sunuyoruz.
Anahtar Kelimeler: Veri zarflama analizi, karar alma birimi, sıralaması.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2017-08-09T07:30:41Z2017-08-09T07:30:41Z2013-062013masterThesisAlirezamohammadi, Mehrdad. (2013). Ranking All Units in DEA. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3389enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/34162017-08-18T23:00:37Zhdl_11129_13Reconstruction of World Bank Classification of Countries and Moody’s Rating SystemMirzaei, NimaIndustrial EngineeringCredit ManagementCountry risk--Mathematical modelsCountry risk--Developing countriesEconomic Indicators--Countries--World BankInternational trade--EvaluationLoans, Foreign--Evaluation--Risk--Debts, ExternalMulti-Group Hierarchical DiscriminationClassification of countriesCountry Risk RatingLogical Analysis of DataThis thesis has two main objectives. The first objective is to analyze whether the classification of countries provided by the World Bank (WB) can be reconstructed with a linear and/or integer-programming model known as Multi-Group Hierarchical Discrimination method, using only data published by the WB. The model’s parameters were determined for a collection of 44 countries, and the model was verified using another 39 countries. Moreover, the study examines the relative importance of factors in classification of countries.
The second purpose of this study is applying Logical Analysis of Data for country risk rating to provide an approximate rating method. The employed data is available in World Bank and International Monetary Fund and the results are compared with Moody’s rating scale on year 2010. The country risk rating model was established for a collection of 71 countries, and the model was verified using another 34 countries. Furthermore, the study examines the relative importance of economical, environmental, educational, and infrastructure criteria in determining countries risk rating.
Keywords: Multi-Group Hierarchical Discrimination, Classification of countries, Country Risk Rating, Logical Analysis of DataÖZ:
Bu tezin iki temel amacı bulunmaktadır. Birinci amacı; Dünya Bankası (DB) tarafından sağlanan ülkeler sınıflandırmasının, sadece DB tarafından yayınlanan verilerle Çoklu Grup Hiyerarşik Ayrıştırma yöntemi olarak bilinen doğrusal ve/veya tamsayı programlamla ile tekrar yapılandırılmasını sağlamaktır. Model parametreleri 44 ülkeden toplamıştr ve 39 başka ülke üzerinden model doğrulandırılması gerçekleştirilmiştir. Ayrıca, bu çalışma ülke sınıflandırılmasında kullanılan faktörlerin göreli etkenlerini incelemektedir.
Bu çalışmanın ikinci amacı ise ülke risk derecelendirilmesi için Mantıksal Veri Analizi kullanarak yaklaşık derecelendirme yöntemi elde etmektir. Kullanılan veri Dünya Bankası'nda ve Uluslarası Para Fonu'nda bulunmaktadır ve elde edilen sonuçlar 2010 yılı için Moody's derecelendirme ölçeğiyle kıyaslanmıştır. Ülke risk derecelendirme modeli 71 ülkenin toplanmasıyla oluşturulmuştur ve geliştirilen model 34 başka ülke kullanılarak doğrulanmıştır. Bundan başka, bu çalışma ekonomik, çevresel, eğitimsel ve altyapısal kriterlerin göreli önemini inceleyerek, ülkelerin risk değerlendirilmesinin oluşturulmasını içermektedir.
Anahtar Kelimeler: Çoklu Grup Hiyerarşik Ayrıştırma, Ülke Sınıflandırılması, Ülke Risk Derecelendirmesi, Mantıksal Veri AnaliziDoctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2013. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2017-08-18T08:05:00Z2017-08-18T08:05:00Z2013-062013doctoralThesisMirzaei, Nima. (2013). Reconstruction of World Bank Classification of Countries and Moody’s Rating System. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3416enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/36272018-04-13T23:01:09Zhdl_11129_13Application of Data Envelopment Analysis by the Evaluation of the Quality and Operational FactorsAhmed, SabaIndustrial EngineeringIndustrial productivity - MeasurementData Envelopment AnalysisFMCGQuality FactorsOperational FactorsEfficiencyCCR ModelBCC ModelFood ProductionSoft drinkIn the last decade, soft drink products among FMCG (Fast Moving Consumer Goods) industry have been facing serious problems due to the change in the consumer preferences. Health concerns towards these products had risen and companies keep making strategies to cope with this change. Since, the condition of the market shares getting narrower, maintaining efficient operations throughout the industry supply chain became an essential matter. The study focuses on the efficiency evaluation of soft drink company’s production lines between 2010 and 2015 located in Köprülüköy Cyprus, since the production phase is one of the most essential part of the whole operation. Data Envelopment Analysis is a widely known technique used for the evaluation of technical efficiencies of decision making units where multiple inputs and multiple outputs were under concern. Here, production lines of the production facility have chosen as DMUs and among the models of DEA, standard CCR and standard BCC models were utilized. Since the study was being performed in FMCG sector, where perishable food products were under concern, quality factors were also taken into consideration besides operational factors in the operation. Especially for the food production process, efficiency of the whole operation is definitely affected by the efficiency of the quality operations. In this study a general procedure for the evaluation of the production line efficiencies for the perishable goods had built that could easily adapted to the whole industry. Findings of the models can help management in decision making process, budget planning purposes, categorize production lines, future plans, and help to build a corporate memory for the efficiency of the lines.
Keywords: Data Envelopment Analysis, FMCG, Quality Factors, Operational Factors, Efficiency, CCR Model, BCC Model, Food Production, Soft drink.ÖZ :
Son on yıl dikkate alındığı taktirde, hızlı tüketim malları sektöründe yer alan gazlı içecek endüstrisi, müşteri tercihlerinin değişimi konusunda ciddi sorunlarla karşılaşmaktadır. Bu ürünlerin insan sağlığına etkileri ile ilgili endişeler artmakta ve şirketler bu durumla başaçıkmak için stratejiler geliştirmektedirler. Endüstrideki pazar paylarının giderek daralması ile birlikte sektör genelinde verimli operasyonlar sağlamak önem arz eder olmuştur. Üretim prosesleri bu zincirin en önemli parçası olduğundan bu çalışma Köprüköy, KKTC'de bulunan bir gazlı içecek üreticisinin 2010 ve 2015 yılları arası üretim hatlarının verimliliği üzerine bir değerlendirme içermektedir. Veri Zarflama Analizi, verimlilik analizinde birden fazla girdi ve çıktı olması durumunda teknik verimliliklerin hesaplanmasında yaygın olarak kullanılan etkin bir yöntemdir. Bu çalışmada, üretim alanındaki her bir üretim hattı bir Karar Verme Birimi olarak seçilmiş ve Veri Zarflama Analizi modellerinden Standard CCR ve Standard BCC modelleri kullanılmıştır. Bu çalışma hızlı tüketim malları sektöründe yapıldığından kısa ömürlü gıda ürünlerinin üretimi incelenmiş ve operasyonel faktörlerin yanında kalite faktörlerinin de dikkate alınmasına karar verilmiştir. Özellikle gıda üretimide kalite operasyonlarının verimliliği, genel anlamda operasyonel verimliliği de etkilemektedir. Bu çalışma neticesinde tüm endüstriye uyarlanabilecek şekilde üretim hatları verimliliklerinin ölçümü için genel bir prosedür oluşturulmuştur. Modelden alınacak sonuçlar şirket yönetiminin karar verme mekanizmasına yardımcı olacak ve bütçe planlaması, üretim hatlarının kategorize edilmesi, gelecek planları ve üretim hatlarının verimliliği hususunda şirket hafızasının oluşturulmasını sağlayacaktır.
Anahtar Kelimeler: Veri Zarflama Analizi, HTM, Kalite Faktörleri, Operasyonel FaktörlerQuality, Verimlilik, CCR Model, BCC Model, Gıda Üretimi, Gazlı İçecek.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2018-04-13T07:52:07Z2018-04-13T07:52:07Z2016-092016-09masterThesisAhmed, Saba. (2016). Application of Data Envelopment Analysis by the Evaluation of the Quality and Operational Factors . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3627enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/36392018-05-17T23:01:35Zhdl_11129_13Computing Malmquist Index Using Data Envelopment Analysis as an Improvement Measure for Educational PurposesBinyuy, Adamu MusaIndustrial EngineeringProduction Management - Evaluation - ProductivityMalmquist IndexDEAStudent Outcomesand Student performanceWith the introduction of “Malmquist indices”, MI, (Caves et al, 1982), it has rapidly
grown into a standard approach for evaluating productivity over recent years.
Meanwhile, Based on the concept of cost efficiency that was first mentioned by
Farrell, (1957), the DEA has become a brawny quantitative and analytical tool for
measuring and evaluating performance of public and private sectors. With the growth
of civilization and vast increase in higher educational institutes around the world, the
performance and efficiency of students became very important as far as their
evaluation is concerned. Defining educational technology as all necessary resources
needed by an institution for accurate student’s performance, we will compute MI
using DEA considering some ABET’s accreditation criteria for student outcomes as
an improvement measure for educational purposes. As the DEA measure the
efficiencies of the student’s performance using a defined set of inputs and outputs,
“Malmquist index” conflate the efficiencies with other factors such as surveys to
compute an index (productivity) for a course or program which can be compared to
unity. Based on this, an educational Malmquist index is defined called Malmquist
Educational Index, MEI to evaluate Student Outcomes, performance and monitor
continuous improvement of Educational programs. We used a case study example,
with real data provided by the chair of the industrial engineering department to
compute MEI for each course. Regarding the value MEI, it could be concluded that
MEI indicates regress and need improvement, MEI indicates progress and
MEI indicates no change for DMU under evaluation.
Keywords: Malmquist Index, DEA, Student Outcomes, and Student performanceÖZ :
“Malmquist Index” , MI (Caves et al, 1982) başlamasıyla, son yıllarda hızla üzerinde verimlilik değerlendirmek için standart bir yaklaşım haline geldi . Maliyet verimliliği kavramı ilk olarak 1957 yılında Farrell tarafından dile getirilmiştir. DEA, kamu ve özel sektör performansını değerlendirmek ve ölçmek için, brawny sayısal ve analitik araç haline gelmiştir. Dünyada yüksek öğretim kurumlarının ve uygarlığın gelişmesi ile ın büyüme ve geniş artması ile birlikte, öğrencilerin performans ve verimliliği değerlendirmenin önemi artmıştır. Öğrenci performansını değerlendirip, eğitim teknolojisini tanımlayan kurumların, öğrencinin eğitsel amaçlı gelişmelerini ölçmek için ABET akreditasyon kriterleri dikkate alınarak DEA kullanılıp MI’ları hesaplanacak. Öğrenci performans verimliliği ölçüm sonucuna ve yapılan ankete göre “Malmquist index” hesaplaması yapılacak. Bu hesaplama yapılırken referans alınan bir index kullanılacak. Buna dayanarak, Öğrenci Kazanımları, performans ve eğitim programlarının gelişimini sürekli izlemek için bir index oluşturulmuş olacak. Bu index de "Malmquist Educational Index" (MEI) olarak adlandırılacak. Endüstri Mühendisliği Bölüm Başkanı tarafından, bölümdeki bütün dersler için sağlanan bilgiler kullanılarak "Malmquist Educational Index" hesaplaması yapıldı. Sonuç olarak MEI < 1 ise gerileme söz konusudur ve DMU (course student, program, instructor etc.) da geliştirme ve yenileme gerekmektedir. MEI
ise ilerleme söz konusudur. Son olarak MEI
ise herhangi bir değişiklik söz konusu değildir Anahtar Kelimeler: Malmquist Endeksi, DEA, Öğrenci Kazanımları ve Öğrenci performansıMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2018-05-17T11:05:12Z2018-05-17T11:05:12Z2015-012015-01masterThesisBinyuy, Adamu Musa (2015). Computing Malmquist Index Using Data Envelopment Analysis as an Improvement Measure for Educational Purposes . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3639enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/37892018-06-19T23:01:01Zhdl_11129_13Heuristic Solutions for Electric Vehicle Routing Problem with Time Windows and Recharging StationsRoozbeh, ImanIndustrial EngineeringTransportation problems (Programming)Vehicle routing problem - Delivery of goods - Mathematical modelsVehicle Routing ProblemClarke and Wright Saving HeuristicGreen LogisticElectric VehiclesCombinatorial OptimizationDue to the regulation and laws concerning the emission of greenhouse gasses, carriers are starting to use electric vehicles for last-mile deliveries. The limited battery capacities of these vehicles necessitate visits to recharging stations during delivery tours of industry-typical length, which have to be considered in the route planning to avoid inefficient vehicle routes with long detours. This thesis seeks to propose new heuristic solution methods for Electric Vehicle Routing Problem with Time Windows (E-VRPTW), which incorporates the possibility of recharging at any of the available charging stations to minimize the total travel distance based on the Clarke and Wright (CW) Saving Heuristic. The solution method focuses on the construction of routes according to waiting time of vehicles, determined priority of customers with regard to their earliest starting service time, customers’ demands and etc. Moreover, the recharging rate, vehicle freight capacity, battery capacity, time windows and recharging time are considered to make it close to real-life logistics problems. Numerical tests are performed on newly designed instances by Schneider and performances of proposed methods are discussed.
Keywords: Vehicle Routing Problem, Clarke and Wright Saving Heuristic, Green Logistic, Electric Vehicles, Combinatorial OptimizationÖZ :
Sera gazlarının salınımı ile ilgili kural ve yasalardan dolayı taşımacılar şehir içi taşımalarını elektrikle çalışan araçlarla yapmaya başlamışlardır. Bu araçların sınırlı olan batarya kapasiteleri, taşıma sırasında zorunlu olarak batarya dolum istasyonlarında şarj edilmeleri gereksinimini doğurmakta ve bu durum da uzun ve verimsiz rotaların önlenmesi için rota planlamasında gözönüne alınmalıdır. Bu tezin amacı, alınan toplam mesafeyi enküçüklemek amacıyla şarjın tüm dolum istasyonlarında mümkün olduğu ve Clarke & Wright tasarruf algoritmasını esas alan Electric Vehicle Routing Problem with Time Windows (E-VRPTW) problemine yeni bir sezgisel çözüm yöntemi önermektir. Önerilen çözüm yöntemi öncelikle araçların bekleme sürelerine, müşterilerin zaman önceliklerine, taleplerine vs. göre rotalar oluşturmaya odaklanmaktadır. Problemin lojistik olarak daha da gerçekçi olmasını sağlamak üzere araçların taşıma kapasiteleri, batarya kapasiteleri, zaman aralıkları, şarj zamanları ve hızları da gözönüne alınmıştır. Schneider’in değerleri üzerinden sayısal deneyler de yapılmış ve önerilen yöntemlerin performansları da tartışılmıştır.
Anahtar Kelimeler: Araç rotalama sorunu, Clarke ve Wright tasarruf sezgiseli, yeşil lojistik, elektrikli araçlar, birleşi eniyilemesiMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2014. Co-Supervisor: Assoc. Prof. Dr. Bülent Çatay, Supervisor: Assist. Prof. Dr. Gökhan İzbırak.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Çatay, Bülent (Co-Supervisor)İzbırak, Gökhan (Supervisor)2018-06-19T10:07:14Z2018-06-19T10:07:14Z2014-092014-09masterThesisRoozbeh, Iman. (2014). Heuristic Solutions for Electric Vehicle Routing Problem with Time Windows and Recharging Stations . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3789enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/38062018-06-20T23:01:45Zhdl_11129_13Ergonomical Evaluation for the Design of EMU Library and Proposing a Better DesignBabaqi, Tareq Abdulrahman MohammedIndustrial EngineeringLibrary BuildingsErgonomicsEastern Mediterranean University LibraryErgonomical EvaluationDesignErgonomic design criteriaAnthropometric dataMismatchPercentileThe objective of thesis is to propose better design of EMU Library by assessing its
furniture and its impact on the understudy stance, execution and consideration. We
discovered that the EMU library furniture (Chairs and Tables) are not suitable for
students' health.
One hundred and fifty seven undergraduate and postgraduate were used as a subject.
They were between 16 to 45 years old. Twelve measurements of anthropometry of
the students were measured including: Shoulder Height (SDH), Stature, Shoulder
Elbow Height, Popliteal Height, Knee Height, Forearm Length, Buttock-to-Popliteal
Length, Elbow Sitting Height(EH), Hip Width, Sitting Height, Sitting, Overhead
Stretch Height, and Eye Height. Standard deviation, mean, percentiles, least and
greatest estimation of measurements were figured.
Arrangement of the present light of the library was assessed by recording the
illumination level on every table on second floor of library. The present light system
was found to neglect to consent to ergonomic configuration criteria.
Another configuration of furniture and recommendation of light system proposed to
enhance the level of solace for students.
Keywords: Ergonomic design criteria, Anthropometric data, Mismatch, PercentileÖz: Bu çalışmanın amacı, DAÜ Kütüphanesi mobilya ve öğrenci duruş, performans ve
dikkat üzerindeki etkisini değerlendirmek.
Yüz elli yedi öğrenci denek olarak kullanıldı. Yaşları 16 ile 45 yıl arasında
değişmektedir. konuların Oniki antropometrik veriler de dahil olmak üzere önlemler
vardı: boyu, Omuz Yüksekliği, Omuz Dirsek yüksekliği, Kalça-Popliteal uzunluğu,
Popliteal yüksekliği, Diz Yüksekliği, Önkol Uzunluğu, Kalça genişliği, Dirsek
oturma Yüksekliği, Oturma Yüksekliği, Oturma Göz Yüksekliği ve Tepegöz streç
yüksekliği. ortalama, standart sapma, yüzdelik, minimum ve antropometrik boyutlar
maksimum değeri hesaplandı.
Kütüphanenin mevcut ışık sistemi kütüphanenin ikinci katta her masada aydınlatma
seviyesini gözlemleyerek değerlendirildi. Geçerli ışık sistemi ergonomik tasarım
kriterlerine uymayan bulunmuştur.
mobilya ve ışık sistemi önerisi yeni bir tasarım öğrencilerin için konfor düzeyini
artırmak için önerildi.
Anahtar Kelimeler: Ergonomi tasarım kriterleri, Antropometrik veriler,
Uyuşmazlığı, YüzdelikMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Assoc. Prof. Dr. Adham Mackieh.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Mackieh, Adham2018-06-20T04:38:34Z2018-06-20T04:38:34Z2016-072016-07masterThesisBabaqi, Tareq Abdulrahman Mohammed. (2016). Ergonomical Evaluation for the Design of EMU Library and Proposing a Better Design. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3806enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/38892018-07-27T23:01:14Zhdl_11129_13Musculoskeletal Activities and Possible Musculoskeletal Discomfort Among Students Using Desktop / Laptop / Tablet Computers: A Case Study with a Special Emphasis to the Use of Tablets for Educational PurposesYel, Elif BinboğaIndustrial EngineeringHuman and ErgonomicsMachine SystemsErgonomicsTablet ComputerChildrenSurveysEMGDoctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Korhan, Orhan2018-07-27T05:22:03Z2018-07-27T05:22:03Z2016-082016-08doctoralThesisYel, Elif Binboğa. (2016). Musculoskeletal Activities and Possible Musculoskeletal Discomfort Among Students Using Desktop / Laptop / Tablet Computers: A Case Study with a Special Emphasis to the Use of Tablets for Educational Purposes. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/3889enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/40822019-04-30T23:01:36Zhdl_11129_13Modification of the Arash Method using Facet AnalysisIbrahim, Mustapha DaruwanaIndustrial EngineeringData envelopment analysisData envelopment analysis-Industrial efficiency-MeasurementIndustrial productivity-MeasurementData Envelopment AnalysisArash MethodEfficiencyTechnical EfficiencyFacet AnalysisModified Arash methodrankData Envelopment Analysis, one of the most popular disciplines in operations research, it is a technique used to estimate the performance of Decision Making Units (DMUs). Technical efficient DMUs and Efficient DMUs are difficult to differentiate without the availability of additional information in the form of weight restrictions or the use of statistical technique and supper efficiency method. The Arash method (2013) distinguishes between Technical efficiency and Efficiency by introducing a small error in input values even if the values are accurate, the efficiency scores of the efficient DMUs does not change, only that of the technical efficient DMUs, it also establishes that, for a DMU to be efficient, technical efficiency is one of the necessary conditions.
In this study we expand the Arash Method by using facet analysis to modify the PPS of the Arash method. The proposed modification places an upper bound only on the free variable of VRS Arash method. This modification on the Arash method gives the true efficiency score and rank for the weak efficient DMUs and DMUs which take their efficiency score when compared to the weak part, because, the use of facet analysis on the frontier of the Arash method deduced some essential details about the constructive hyper planes of the production possibility set (PPS), Particularly the weak part of the frontier.
Keywords: Data Envelopment Analysis, Arash Method, Efficiency, Technical Efficiency, Facet Analysis, Modified Arash method, rank.ÖZ:
Yöneylem araştırmalarında en bilinen disiplin veri zarflama analizidir. Bu analiz Karar Verme Birimleri’nin (KVB) performansını tahmin etmede kullanılan bir tekniktir. Teknik verimli KVB ve verimli KVB’yi birbirinden ayırmak ek bilgi olmadan zordur. Bu ek bilgiler ağırlık kısıtlamaları formundadır veya istatistik tekniği ve süper verimlilik metodu kullanılarak elde edilir. Arash metodu (2013) teknik verimlilik ve verimliliği birbirinden ayırmada giriş değerindeki küçük bir hatanın, değerler doğru olsa bile verimli KVB’deki verimlilik değerini değiştirmeyeceğini, teknik verimli KVB’yi değiştireceğini sunmuştur. Ayrıca, KVB’nin verimli olması için teknik verimlilik gerekli bir durumdur.
Bu çalışmada Arash metod, Arash metodun üretim imkanları setini değiştirmek için yön analizi kullanılarak genişletilmiştir. Öngörülen değişim üst sınırda Arash metodun ölçek değişken dönüşünün serbest değişkeninde yapılmıştır. Arash metoddaki bu değişim KVB’lerin gerçek verimlilik hesabını ve zayıf verimlilik derecelerini göstermektedir. KVB’lerin verimlilik hesabı zayıf verimli taraf ile, sınırın özellikle zayıf parçası, karşılaştırıldığında Arash metodun sınırında yön analizi kullanımı sebebiyle, üretim imkanları setinin yapıcı hiperdüzlemleri hakkında bazı temel ayrıntılar ortaya çıkmıştır.
Anahtar Kelimeler: Veri Zarflama Analizi, Arash Metod, Verimlilik, Teknik Verimlilik, Yön Analizi, Değiştirilmiş Arash Metod, Derece.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2015. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University EMUDaneshvar, Sahand2019-04-30T06:29:15Z2019-04-30T06:29:15Z2015-072015masterThesisIbrahim, Mustapha Daruwana. (2015). Modification of the Arash Method using Facet Analysis .Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4082enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/40572019-04-26T23:02:13Zhdl_11129_13Optimization of the Production Planning and Supplier-Material Selection Problems in Carton Box Production IndustriesMosallaeipour, SamIndustrial EngineeringProduction ManagementProduction Planning and SchedulingSupplier selectionMaterial selectionCarton box production industriesThis study deals with the problem of supplier-material selection as well as production
planning in carton box production industries. The initial step in solving these problems
is to deal with the cutting problem which refers to the problem of dividing a usually
large piece of the rectangular raw materials into smaller pieces for producing various
products. Dealing with this problem is at the stake of dealing with the uncertainties
related to the environment of the problem in most cases. A critical problem arises when
size, amount, and suppliers of the raw materials have an uncertain nature from the
price point of view. In such cases, selecting the correct size and quantity of the raw
material as well as right suppliers are the crucial elements for a competent production.
In this research, a model reflecting the nature of the problem is proposed and a new
solution approach is employed for solving it. Moreover, the problem’s related
uncertainties are incorporated to the original problem through utilizing the fuzzy
variables. The new problem then is solved with different fuzzy methods. The
mentioned approaches are verified through implementaion on a newly established
company which produces carton boxes for various manufacturers. These carton boxes
must meet a very accurate specification related to their material type and dimension
congruous with their purchaser’s requirements. The objective is to optimizing the
production procedure and defining an efficient production system as one of the
essential requirements for sustainability of the production within this company. In the
following chapters, all of the steps are discussed in detail.
Keywords: Production Planning and Scheduling, Supplier selection, Material
selection, Carton box production industries.ÖZ:
Bu çalışmada karton kutu üretim sanayisi için tedarikçi-malzeme seçimi problemi ve
üretim planlama çalışmaları ele alınmıştır. Bu problemlerin çözümündeki ilk aşama
genellikle büyük boyutlu dikdörtgen şeklindeki hammaddeleri çeşitli ürünlerin
üretilmesi için küçük parçalar halinde kesme probleminin çözülmesidir. Bu problemin
çözümü çoğu durumda problemle ilgili belirsizliklerle uğraşmayı gerektirmektedir.
Ölçü, miktar ve hammade tedarikçilerinin belirsizlik ortamında olması fiyatla ilgili
kritik bir problemin ortaya çıkmasına sebep olur. Böyle durumlarda, hammaddeyle
iligi doğru ölçü, mikrat ve de tedarikçi seçimi rekabetçi üretimin önemli etkenleridir.
Bu çalışmada, problemin bir modeli önerilmiş ve yeni bir çözüm yöntemi
uygulanmıştır. Dahası, problemle ilgili belirsizlikler bulanık değişkenler kullanarak
orijinal probleme dahil edilmiştir. Bu yeni problem farklı bulanık yöntemler
kullanılarak çözülmüştür. Bahsi geçen yaklaşımlar daha sonra çeşitli imalatçılar için
karton kutu üreten yeni bir şirket için uygulanarak doğrulanmıştır. Bu karton kutular
müşterilerin gereksinimlerine uygun olarak hammade tipi ve boyutlarla ilgili çok kesin
özellikleri sağlamalıdır. Amaç, bu şirket için üretimin devamlılığyala ilgili temel
ihtiyaçlardan biri olarak üretim işlemini en iyilemek ve etkili bir üretim sistemi
tanımlamaktır. İzleyen bölümlerde tüm aşamalar detaylı bir şekilde anlatılmıştır.
Anahtar kelimeler: Üretim planlama ve çizelgeleme, Tedarikçi seçimi, Hammade
seçimi, Karton kutu üretim sanayii.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Co-Supervisor: Assist. Prof. Dr. Sadegh Niroomand, Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University EMUNiroomand, Sadegh (Co-Supervisor)Vizvari, Bela (Supervisor)2019-04-26T10:56:25Z2019-04-26T10:56:25Z2017-082017doctoralThesisMosallaeipour, Sam. (2017). Optimization of the Production Planning and Supplier-Material Selection Problems in Carton Box Production Industries. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4057enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/41592019-10-11T23:02:13Zhdl_11129_13Modified Data Envelopment Analysis Model Based on Service Quality Concept for Vendor SelectionHassan, Nura IbrahimIndustrial EngineeringVendor selection-managementModified Data Envelopment AnalysisVendor Evaluation and SelectionService QualityPurchasing function is the key part of the logistics management in firms, and the
prime responsibility for this function is the selection of appropriate vendors i.e. the
most efficiently performing vendors. Many analytical and conceptual models for
tackling the vendor selection problem have been established. Several criteria are to
be considered in evaluating vendors’ relative efficiencies, hence this problem is
being recognized as multiple criteria decision making problem. Researchers
developed techniques for tackling this multi criteria efficiency evaluation problems
in recent years by applying Data Envelopment Analysis (DEA) being the most
effective method for evaluating vendor efficiencies, but all their researches did not
address the issue of weakly efficient vendors in the DEA. Therefore, this thesis
introduce a modified method for figuring vendors efficiency with the issue of weak
efficient vendors being properly addressed so that only truly efficient vendors are
selected in the appropriation situation. The modified method uses facet analysis in
modifying the standard DEA model employed by several researchers in evaluating
the vendors’ efficiencies. The criteria chosen in these models are service quality, rate
of rejected items, late deliveries and price. The results and comparisons between the
modified and standard DEA model shows that the modified DEA model gives a
better and true efficiency scores of vendors, this greatly improve the vendor
evaluation and selection methods.
Keywords: Modified Data Envelopment Analysis, Vendor Evaluation and Selection,
Service QualityÖZ:
Şirketlerde lojistik yönetiminin temel kısmı satın alma fonksiyonudur ve bu fonksiyonun başlıca sorumluluğu, uygun satıcıları, yani en verimli şekilde çalışan satıcıları seçmektir. Satıcı seçimi problemini çözmek için birçok analitik ve kavramsal model geliştirilmiştir. Satıcıların göreli verimliliklerinin değerlendirilmesinde çeşitli kriterler göz önüne alınmalıdır, bu nedenle satıcı seçim problemi çok kriterli karar verme problemi olarak kabul edilmektedir. Son yıllarda, araştırmacılar, bu çok ölçütlü verimlilik değerlendirme sorunlarını, Veri Zarflama Analizi'ni (VZA) en etkin değerlendirme yöntemi olarak uygulayarak, çözmek için teknikler geliştirmişlerdir ancak tüm bu araştırmalar, VZA'daki zayıf verimli satıcıların sorununu ele almamaktadır. Bu nedenle, bu tez, zayıf verimli satıcıların uygun bir şekilde ele alınması sorunu ile satıcıları değerlendirmek için modifiye edilmiş bir yaklaşım sunmakta ve böylece yalnızca bir tedarik durumunda gerçekten verimli satıcılar seçilmektedir. Değiştirilen yaklaşım, satıcıların verimliliklerini değerlendirirken birçok araştırmacı tarafından kullanılan standart VZA modelinin modifikasyonunda faset analizini kullanmaktadır. Bu modellerde göz önüne alınan kriterler, hizmet kalitesi, fiyat, geç teslimat ve reddedilen parçalardır. Modifiye ve standart VZA modeli arasındaki sonuçlar ve karşılaştırmalar, modifiye VZA modelinin satıcıların daha iyi ve gerçek etkinlik skorları verdiğini, bunun da satıcı değerlendirme ve seçim yöntemlerini büyük ölçüde iyileştirdiğini göstermektedir.
Anahtar Kelimeler: Veri Zarflama Analizi, Satıcı Seçimi, Servis KalitesiMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University EMUDaneshvar, Sahand2019-10-11T07:15:23Z2019-10-11T07:15:23Z2017-012017masterThesisHassan, Nura Ibrahim. (2017). Modified Data Envelopment Analysis Model Based on Service Quality Concept for Vendor Selection. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4159enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/41492019-10-11T23:02:06Zhdl_11129_13Optimizing Crude Oil in Transportation Pipeline using Response Surface MethodologyLahrash, Mohamed Ali HassanIndustrial EngineeringOil (Petroleum)-Pipeline transportationCorrosionModellingRSMCPRCO2PredictionOptimizingIn this study, response surface methodology (RSM) has been employed to study,
model and optimize the effect of some operation parameters of crude oil
transportation processes, by pipeline, on the corrosion penetration rate (CPR). The
parameters studied were, pressure, temperature, and pH, and their ranges were
determined.
Response surface methodology (RSM) has been applied using Central Composite
Design (CCD) to generate specific number of experiments to check the CPR, The
predicted values obtained using developed model were compared with the actual
values calculated using NORSOK M-506 standard software based on the mean
absolute error (MAE).
Analysis of variance (ANOVA), surface and contour plots were applied for
prediction, modelling using first and second order models and optimizing process
parameters.
The value of the MAE was 0.047467 which indicated that, the model is reliable and
significant. Moreover, the optimal values of the studied parameters, pressure,
temperature, and pH achieved.
Keywords: Corrosion, Modelling, RSM, CPR, CO2, Prediction, Optimizing.ÖZ:
Bu çalışmada, boru hattı ile ham petrol taşıma süreçlerinin bazı çalışma parameterleri
-nin korozyon penetrasyon hızı (CPR) üzerindeki etkisini incelemek, modellemek ve
optimize etmek için tepki yüzeyi metodolojisi (RSM) kullanılmıştır. İncelenen param
-etreler basınç, sıcaklık ve pH idi ve aralıkları belirlendi.
CPR'yi kontrol etmek için belirli sayıda deneyler üretmek için Merkezi Kompozit Tasarım
(CCD) kullanılarak Yanıt Yüzey Metodolojisi (RSM) uygulanmıştır.
Geliştirile model kullanılarak elde edilen tahmin değerleri, NORSOK M-506 standart
yaz -ılımı kullanılarak hesaplanan gerçek değerlerle karşılaştırılmıştır. Ortalama mutl
-ak hata (MAE).
Tahmin, birinci ve ikinci mertebeden modeller kullanılarak modelleme ve süreç para
-metrelerinin optimizasyonu için varyans analizi (ANOVA), yüzey ve kontur çizimle
-ri uygulanmıştır.
MAE değeri 0.047467 olup, modelin güvenilir ve anlamlı olduğunu belirtmiştir, Üste
-lik, incelenen parametrelerin, basınç, sıcaklk ve pH optimal değerleri elde edilmistir.
Anahtar Kelimeler: Korozyon, Modelleme, RSM, CPR, CO2, Tahmin,
Optimizasyon.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assoc. Prof. Dr. Adham Mackieh.Eastern Mediterranean University EMUMackieh, Adham2019-10-11T05:56:51Z2019-10-11T05:56:51Z2017-092017masterThesisLahrash, Mohamed Ali Hassan. (2017). Optimizing Crude Oil in Transportation Pipeline using Response Surface Methodology. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4149enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/41742019-10-22T23:02:21Zhdl_11129_13Fault Tree Analysis to Compute the Probability of an Event: A Case Study in Oil and Gas IndustryYazdi, MohammadIndustrial EngineeringStability of SystemsFault tree analysisFuzzy logicChemical complex plantExpert judgmentThe aim of this study is establishing Fault Tree Analysis (FTA) with using experts’
opinions to compute the probability of an event (as a main factor of risk value). Thus,
in order to find the probability of top event, all of the basic event’s probability should
be available when FTA is drawn for an event. In this case, several experts will be
employed to express their opinions in qualitative terms for all basic events instead of
using probabilities from handbooks. In real life, participated experts have subjective
weights based on their background and experiences. Therefore, they should be
weighted by a standard method like as AHP. Then the experts’ opinions will be
collected. In this case, fuzzy set theory will be employed. All experts’ opinion which
is expressed in qualitative terms (crisp value) is transferred to fuzzy set number
(triangular or trapezoidal). Accordingly, in fuzzy environment their opinions will be
aggregated in a set of fuzzy number form. So, the fuzzy number requires to be
defuzzified to crisp value. Finally probability of basic events will be computed, and
subsequently the probability of top event will be calculated using Boolean algebra.
Keywords: Fault tree analysis, Fuzzy logic, Chemical complex plant, Expert
judgmentÖZ:
Bu çalışmanın amacı bir olayın olasılığını (risk değerinin ana faktörü olarak)
hesaplamak için uzmanların görüşlerini kullanarak Arıza Ağacı
Analizi (AAA) kurmaktır. Böylece, en önemli olay olasılığını bulmak için,
bir olay için AAA çekildiğinde temel olay olasılığının tümünün mevcut
olması gerekir. Bu durumda, el kitaplarındaki olasılıkları kullanmak yerine,
tüm temel olaylar için görüşlerini nitel olarak ifade etmek üzere birkaç
uzman görüşüne başvurulmuştur. Gerçek hayatta katılan uzmanların geçmiş
deneyimlerine dayalı öznel ağırlıkları bulunmaktadır. Bu nedenle, Analitik
Hiyerarşi Süreci gibi standart bir yöntemle ağırlıklandırılmalıdır. Bu
aşamada uzmanların görüşleri toplanıp, bulanık küme teorisi kullanılacaktır.
Niteliksel terimlerle (net değer) ifade edilen tüm uzmanların görüşleri
bulanık kümeye (üçgen veya trapez şeklinde) aktarılacaktır.Buna göre,
bulanık ortamda görüşleri bulanık sayı formunda toplanacaktır. Böylece,
bulanık sayı, berrak bir değere çekilmeyi gerektirecektir. Sonunda temel
olayların olasılığı hesaplanacak ve daha sonra en üstteki olay
olasılığı Boolean cebri kullanılarak hesaplanacaktır.
Anahtar Kelimeler: Hasar ağacı analizi, Bulanık mantık, Kimyasal
kompleks tesis, Uzman yargısıMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University EMUKorhan, Orhan2019-10-22T10:47:39Z2019-10-22T10:47:39Z2017-062017masterThesisYazdi, Mohammad. (2017). Fault Tree Analysis to Compute the Probability of an Event: A Case Study in Oil and Gas Industry. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4174enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/42262019-12-26T00:02:09Zhdl_11129_13Application of AHP Method for Failure Modes and Effect Analysis (FMEA) in Aerospace Industry for Aircraft Landing SystemEl Dandachi, Yahya El OsmanIndustrial EngineeringQuality control-Reliability (Engineering)Failure ModeRisk Priority NumberDecision MakingFMEAAHPFMEA has been used in the aerospace industry for many years; this industry has been growing rapidly, so reliability and safety guarantee have been of increasing concern within the aerospace industry.
Conventional FMEA technique still imposes many common shortages in order to compute RPN, which is product of the Severity (S), Detection (D) and Occurrence (O). Conventional FMEA considers the important of the elements S, O and D with the same weight which is not effective in practical FMEA study.
In our base article, the study was done by 4 experts using the fuzzy developed FMEA that yielded crisp RPN scores for the failure modes of the aircraft landing system used in the research, this imposes a problem when ranking the risks of those modes. In this study, we used AHP that helps decision makers find one that best suits their goal and their understanding of the problem. It provides a comprehensive and rational framework for structuring a decision problem, for representing and quantifying its elements, for relating those elements to overall goals, and for evaluating alternative solutions. When using the AHP method, expert‘s opinions and weights will be obtained and will be prioritized in a better way than FMEA weights. A pairwise comparison questionnaire was designed and distributed to 35 aerospace experts working in Jet Aviation, in Basel Switzerland, then critical selection factors were identified, consistency vector, index and rate were determined, ―expert choice 11.0‖ was
applied to compute the outcomes. FMEA components were compared in the hierarchy, reaching the RPN and ranking its scores. RPN better values obtained showed the significant risk level attained by some FMs in the aircraft landing system that were used in our base study. Keywords: FMEA; AHP; Failure Mode; Risk Priority Number; Decision MakingÖZ:
FMEA, hava-uzay endüstrisinde yıllardır kullanılmaktadır; bu endüstri hızla büyümektedir, bu yüzden dayanıklılığı ve güven garantisi, hava-uzay endüstrisi ile yükseliĢe geçmiĢtir.
Geleneksel FMEA tekniği, RPN hesadplamalarını bir çok sıkça rastlanan eksikliğiyle hala zorlamaktadır ki sonucu: Zorluk (Z), Tarama (T) and OluĢumu (O)‘dur. Geleneksel FMEA, Z, T ve O‘nun önemli elementlerini aynı ağırlıkla –ki bu, kullanıĢlı FMEA çalıĢmasını etkilemeyecek olan- birlikte göz önüne alır.
Makalemizin temeli; bu çalıĢma belirsiz geliĢmiĢ olan FMEA‘yı kullanan 4 bilirkiĢi tarafından tamamlanmıĢtır ve bu araĢtırmada, uzay-hava iniĢ sistemi hata modlarının, hızlı RPN skorlarından yararlanılmıĢtır. Bu modların riskleri en yüksek mevkide problem yaratır. Bu çalıĢmada, amaçlarına en iyi uyan, karar yapıcıları bulmaya ve sorunları anlamaya yardımcı olan AHP‘yi kullandık. AHP, bir karar sorunu yapısı, elementleri temsil eden ve niceliğini belirleyen, bütün bu elementlerin amaçlarının tamamıyla iliĢkili olarak, etraflı ve mantıklı bir ana yapı iskeleti üretir. AHP yöntemi kullanıldığında, bilirkiĢinin düĢünceleri ve ağırlıkları elde edilecektir ve FMEA ağırlıklarına göre en iyi yönteme öncelik verilecektir. Bir, ikili kıyaslama anketi tasarladı ve Jet Havacılıkta, Basel-Ġsviçre‘de, çalıĢan 35 uzay-hava bilirkiĢisine dağıtıldı sonra kritik seçim faktörleri tanımlandı, uyumluluk vektörü, dizin ve değer belirlendi, ―bilirkiĢi seçimi 11.0‖ olarak sonuçların hesaplarına
eklendi. FMEA bileĢenleri, bir düzen içerisinde karĢılaĢtırıldı, RPN‘ye ve skorların aĢamasına ulaĢıldı. RPN‘nin elde edilen daha iyi değerleri, hava-uzay iniĢ sistemlerinin bazı FM‘leri tarafından, önemli risk seviyelerine ulaĢıldığı gösterildi. Anahtar Kelimeler: FMEA; AHP; Hatalı Mod; Risk Öncelik Numarası; Karar YapıcıMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2019-12-25T13:18:36Z2019-12-25T13:18:36Z2017-082017masterThesisEl Dandachi, Yahya El Osman. (2017). Application of AHP Method for Failure Modes and Effect Analysis (FMEA) in Aerospace Industry for Aircraft Landing System . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4226enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/42852020-01-29T00:03:05Zhdl_11129_13Incorporating Quality and Operational Factors in Ranking of Production Lines Using Data Envelopment AnalysisIgwieli, Zienab B. MohamedIndustrial EngineeringIndustrial productivity-MeasurementData envelopment analysisproduction linesquality factorsoperational factorsmodified BCCsuper efficiencyThe competition in the Fast Moving Consumer Goods (FMCG) industry is high,
especially in the perishable goods sector. Manufacturers need to compete for the
market share as the demand is limited. For companies to have competitive advantage,
they need to operate efficiently, and ranking their production lines will help identify
the efficient and most important lines that contribute to their efficiency.
This study aims to evaluate efficiency and ranking of production lines by
incorporating both operational and quality factors using Ranking models in Data
Envelopment Analysis (DAE). A new Modified ranking model is proposed by
comparing standard ranking model and modified DAE models. Standard ranking
model and modified version are used on a data which collocated from a beverage
producing company in Cyprus. It is shown that the modified model will help to
identify the efficient production lines. Also the results of the study will help
management in proper resources distribution for efficiency improvement and budget
planning.
The study shows that can production line is the most efficient production line among
the five production lines evaluated under standard and modified DAE models, and
Pet-2 and Premix line are ranked among the highest by the modified ranking models.
The analysis shows that, to improve the efficiency and rank of production lines,
combination of operational and quality factor needs to be improved together.
Keywords: data envelopment analysis, production lines, quality factors, operational
factors, modified BCC, super efficiency.ÖZ:
Hızlı Hareketli Tüketim Malları (HHTM) sektöründeki rekabet, özellikle bozulabilir
mal sektöründe yüksektir. Üreticilerin talep sınırlı olduğundan pazar payı için
rekabet etmeleri gerekir. Şirketler rekabet avantajı elde edebilmek için etkin bir
şekilde çalışmalıdır ve şirketlerin verimliliklerine katkıda bulunacak olan verimli ve
en önemli hatları belirlemek için üretim hatlarını sıralamak şirketlere yardımcı
olacaktır. Bu çalışma, Veri Zarflamaları Analizinde (DAE) Sıralama modellerini
kullanarak operasyonel ve kalite faktörlerini birleştirerek üretim hatlarının
verimliliğini değerlendirmeyi amaçlamaktadır. Yeni Modified ranking modeli,
standart sıralama modelini ve modifiye DAE modellerini karşılaştırarak
önerilmektedir. Kıbrıs'taki bir içecek üreten şirketin bir araya getirdiği bir veri
üzerinde standart sıralama modeli ve modifiye edilmiş versiyon kullanılır.
Değiştirilen modelin verimli üretim hatlarının belirlenmesine yardımcı olacağı
gösterilmiştir. Çalışmanın sonuçları, yönetimin etkinlik geliştirme ve bütçe
planlaması için uygun kaynak dağılımında yardımcı olacaktır. Çalışma, hem standart
hem de modifiye DAE modelleri altında değerlendirilen beş üretim hattı arasında
teneke üretim hattının en verimli üretim olduğunu ve Pet-2 ve Premix hattının
modifiye modeli ile en yüksek üretim seviyesine geldiğini göstermektedir. Analiz,
diğer üretim hattının verimliliğini artırmak için operasyonel ve kalite faktörünün
birlikte geliştirilmesi gerektiğini göstermektedir.
Anahtar Kelimeler: veri zarflama analizi, üretim hatları, kalite faktörleri,
operasyonel faktörler, modifiye BCC, süper verimlilik.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University EMU - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2020-01-28T08:41:49Z2020-01-28T08:41:49Z2017-022017masterThesisIgwieli, Zienab B. Mohamed. (2017). Incorporating Quality and Operational Factors in Ranking of Production Lines Using Data Envelopment Analysis. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4285enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/43072020-01-29T00:02:41Zhdl_11129_13Humanitarian Logistics: Optimization Techniques for Emergency Preparedness and Post-Earthquake ResponseNedjati, ArmanIndustrial EngineeringPost-earthquake responserelief distribution systemCoverage path problemCovering tour problemUAVThe most crowded cities in the world are located in high risk seismic areas. For humanitarian logistics system structure in highly populated cities we must search for fast and reliable monitoring and transportation methods with a futuristic mind. It is desirable to have a pre-planned immediate and automated post-disaster mapping, and transporting system. Due to roads blockage and time limits in the disaster response phase, Unmanned Aerial Vehicles (UAVs) can be utilized for relief distribution and rapid damage assessment. Also for medium to long-term ground response phase more complex but realistic models are needed.
In this study we present relief distribution and damage assessment systems alongside mathematical linear programming formulations and heuristics. In an applied sense the research improves the emergency preparedness and post-earthquake response activities. A relief distribution system by medium-scale UAV helicopters is investigated and the outcomes reveal that the system has efficient capability for urban areas with high population density. Moreover, a rapid damage assessment system is presented in which multiple UAVs are deployed to collect the images from the earthquake site and create a response map for extracting useful information.
Furthermore the covering tour location routing problem with replenishment at intermediate depots (CLRPR) is developed. The investigation represents a new bi-objective integer linear programming model that minimizes the total weighted waiting
time and the total amount of lost demands. Among the different applications of the
problem, this study concentrates on the post-earthquake relief distribution system.
The mathematical models are coded in GAMS and solved by Cplex solver.
Furthermore, some meta-heuristic algorithms are presented for CLRPR in order to find
the near optimal solutions of large scale problems.
Keywords: Post-earthquake response, relief distribution system,
Coverage path problem, Covering tour problem, UAVÖZ:
Dünyadaki en kalabalık şehirler yüksek riskli sismik bölgelerde
bulunmaktadır. Böyle şehirlerde insancıl lojistik sistemler geliştirirken geleceği de
gözeten hızlı ve güvenilir takip ve taşıma yöntemleri gözönüne alınmalıdır. Afet
sonrası önceden planlanmış anında ve otomatikleştirilmiş haritalama ve ulaştırma
sistemleri kurulmalıdır. Afet sonrası yolların kapalı ve zamanın da önemli olduğu
düşünüldüğünde İnsansız Hava Araçlarının (İHA) yardımların dağıtımı ve hızlı zarar
tespitinde kullanılabileceği açıktır. Ayrıca orta ve uzun vadeli müdahale aşamasında
karmaşık ancak gerçekçi modellere de ihtiyaç vardır.
Bu çalışmada matematiksel doğrusal programlama ve sezgisel yöntemlerle
yardım dağıtımı ve hasar değerlendirme sistemleri sunulmuştur. Çalışma ayrıca acil
durumlara hazırlıklılık ve deprem sonrası faaliyetleri ugulama anlamında
geliştirmektedir. Orta boyutlu insansız helikopterler kullanarak yapılacak yardım
dağıtım sistemi incelenmiş ve bulgular bu sistemin kalabalık kentsel yerleşkelerde
etkin yeteneklere sahip olduğunu göstermiştir. Ayrıca İHA’lar marifeti ile, önemli
bilgilere ulaşılmasını sağlayacak deprem bölgesinden toplanmış görüntülerle bir
müdahale haritası hazırlanması ve böylece hızlı bir hasar tespit sistemi elde edilmesi
de gösterilmiştir.
Çalışmada ayrıca ara yardım istasyonlarında ikmal edilebilir konum-güzergah
kapsayıcı tur problemi (CLRPR) de geliştirilmiştir. Araştırma toplam ağırlıklı bekleme
süresi ve toplam talep kaybını minimize eden yeni bir çift amaçlı tamsayılı doğrusal
programlama modelini göstermektedir. Problemin diğer uygulamaları mümkün
olmakla birlikte, bu çalışmanın odağı, deprem sonrası yardım dağıtım sistemidir.
Matematiksel modeler GAMS ile kodlanmış ve Cplex ile çözülmüştür. Ayrıca
büyük ölçekli CLRPR probleminin optimale yakın çözümlerini bulacak üst-sezgisel
algoritmalar da gösterilmiştir.
Anahtar Kelimeler: Deprem sonrası müdahale, Yardım Dağıtım sistemi,
Kapsayıcı Güzergah problemi, Kapsayan Tur problem, İHADoctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Co-Supervisor: Assoc. Prof. Dr. Jamal Arkat, Supervisor: Assoc. Prof. Dr. Gökhan İzbırak.Eastern Mediterranean University EMU - Doğu Akdeniz Üniversitesi (DAÜ)Arkat, Jamal (Co-Supervisor)İzbırak, Gökhan (Supervisor)2020-01-28T10:57:32Z2020-01-28T10:57:32Z2017-012017doctoralThesisNedjati, Arman. (2017). Humanitarian Logistics: Optimization Techniques for Emergency Preparedness and Post-Earthquake Response. Thesis (Ph.D), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4307enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/45032020-08-21T23:01:39Zhdl_11129_13The Impacts of Economic Sanctions on Supply Chain ManagementShakeri, EhsanIndustrial EngineeringBusiness logisticsSupply chain managementSanctionsRisk managementOver the last two decades, supply chains have shown a great tendency of expanding their networks beyond the national boundaries and using the global sourcing strategy. As a result, supply chains have become more complex and dynamic networks that extend over several countries, including multiple tiers of suppliers, each of which may have various entities with different operations, structures and goals. In this situation, any uncertainty in the political and economic relations between countries should be considered as a source of risks. After the rise of unforeseeable political issues, one conceivable response of nations is imposing sanctions which lead to significant problems in seller-buyer relationships.
This study has focused on the Iranian supply chains -which have been suffering from harsh economic and financial sanctions in the recent years- in order to investigate the impact of such sanctions on supply chain risk management (SCRM). After identifying the most significant supply chain risks associated with different flows, namely material, information and financial flows, the identified risks are analyzed via a qualitative method with respect to means of probability, impact and effect of sanctions.
The impact of sanctions on different risk drivers, industries and supply chain performance measures are investigated. The results show that sanctions have the greatest negative impact on financial risks compared to the other risk drivers and all companies regardless of their industries and scopes are found to be vulnerable to sanctions. As to performance criteria however, the analyses disclose that supply chain
cost and cash to cash cycle should receive more attention whenever the supply chain are influenced by sanctions.
The analyses reveal that supply chain risk factors are really triggered by sanctions specifically risks of exchange rate movements, material price fluctuations, supplier bankruptcy, inability to collect all receivables and buying from a single source which should be viewed as the leading risk factor in the presence of sanctions.
In the final stage, the high ranked risks are discussed and appropriate risk management strategies are proposed to deal with them.
Keywords: Supply chain management, Sanctions, Risk management.ÖZ:
Son 20 yılda, tedarik zincirleri ulusal sınırların ötesinde kendi ağlarını genişleterek ve küresel tedarik stratejisi kullanarak büyük bir eğilim göstermiştir. Sonuç olarak, birden fazla katmanda her biri farklı işlemler, yapı ve hedefleri ile çeşitli varlıklara sahip olan tedarik zincirleri birçok ülkede yayılmış daha karmaşk ve dinamik ağlar haline gelmiştir. Bu durumda, ülkeler arasındaki siyasi ve ekonomik ilişkilerdeki herhangi bir belirsizlik risklerin kaynağı olarak kabul edilmelidir. Öngörülemeyen siyasi konuların artmasından sonra, ülkerin ilk tepkisi satıcı-alıcı ilişkilerinde sorunlar yol açacak yaptırımlarda bulunmatıv.
Bu çalışma, son yıllarda sert ekonomik ve mali yaptırımlara uğramış, tedarik zinciri risk yönetimini fonksiyonların etkisini araştırmak için İran tedarik zincirlerine odaklanmıştır (SCRM). Farklı akışları ile en önemli tedarik zinciri risklerini tespit ettikten sonra, yani malzeme, bilgi ve finansal akımlar, belirlenen risklerin olasılık, çarpma ve yaptırımların etkisinin araçlarının açısından nitel yönteme analiz edilir. Farklı risk sürücüleri, sanayi ve tedarik zinciri performans önlemlerinin yaptırımların etkisi araştırılmıştır. Sonuçlar yaptırımlara bakılmaksızın sanayi ve kapsamların diğer risk sürücüleri ve tüm şirketlere kıyasla finansal yaptırımlara karşı savunmasız olarak kabul edilir olduğunu göstermektedir. Performans kriterleri açısından, tedarik zinciri yaptırımları zaman nakit döngüsündeki yaptırımlarda tedarik zinciri bundan etkilenmektedir.
Analizler, özellikle döviz kurundaki hareketlerin riskleri tedarik zinciri risk faktörlerinin yaptırımlar tarafından tetiklendiğini ortaya koymaktadır, materyal fiyat
dalgalanmaları, tedarikçi iflasi, tek bir kaynaktan satın almak için yetersiz tüm alacak toplama ve yaptırımlar lider risk faktörleri olarak görülmelidir.
Son aşamada, yüksek sıradaki riskler tartışıldı ve bunlarla başa çıkabilmek için uygun risk yönetimi stratejileri önerılmıştır.
Anahtar Kelimeler: Tedarik zinciri yönetimi, Cezai yaptırımlar, Risk yönetimi.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2020-08-21T11:07:59Z2020-08-21T11:07:59Z20162016masterThesisShakeri, Ehsan. (2016). The Impacts of Economic Sanctions on Supply Chain Management. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4503enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/44452020-08-14T23:01:38Zhdl_11129_13Work Related Musculoskeletal Discomfort among Iranian Heavy Truck DriversNazerian, RamtinIndustrial EngineeringHuman engineering-Work environment-Industrial safetyWork-ErgonomicsMusculoskeletal disordersWRMSDREBALogistic regressionNordic Musculoskeletal QuestionnaireMusculoskeletal Disorders (MSDs) are the common health problems among individuals in different occupations. Heavy truck drivers are exposed to various psychological, psychosocial and physiological factors such as Whole Body Vibration (WBV), awkward positioning, bad eating habits and etc. which some of them cause the prevalence of musculoskeletal discomfort in different body regions. In Iran, the prevalence of musculoskeletal discomfort among the heavy truck drivers is a mutual concern. Thus, investigation related to association of different factors with prevalence of musculoskeletal discomforts is necessary.
Cross sectional study method is applied in order to assess association of factors with the occurrence of musculoskeletal discomforts. 384 Iranian heavy truck drivers are interviewed by an updated Nordic Musculoskeletal Questionnaire (NMQ). Furthermore, hypothesis testing is used to assess the associations of different factors and musculoskeletal discomfort reported by participants. Logistic regression method is used to investigate the different correlations among questions of the survey and different body sections that Interviewees experience trouble as well. Moreover, Rapid Entire Body Assessment (REBA) technique is applied for various positions of drivers whom used in order to fulfill different job tasks.
Results demonstrate that 57% of the drivers are suffering from discomfort in their lower back region. Additionally, neck, left shoulder, right shoulder, knees and upper back, are among the high prevalence region that musculoskeletal discomfort has been reported. Hours of exposure to vibration were associated with discomfort of neck (p-
value=0.00) and shoulders area (p-value=0.00); though, such a relation was not found for the discomfort of lower back (p-value=0.30). In addition 24 mathematical equations have been illustrated with significant predictors‟ questions and their correlations with the prevalence musculoskeletal discomfort of different body regions of truck drivers. REBA method improved three different positions of the truck drivers; however, seating position behind the steering wheel is remains at high risk position category (REBA score=10).
Keywords: Musculoskeletal disorders, WRMSD, REBA, Logistic regression, Nordic Musculoskeletal QuestionnaireÖZ:
Kas-iskelet sistemi hastalıkları (KİSH) farklı mesleklerdeki bireyler arasındaki ortak sağlık sorunları arasında bulunmaktadır. Ağır kamyon şoförleri, Tüm Vücut Titreşim (WBV), garip konumlandırma, kötü beslenme alışkanlıkları vb gibi sebepler ile vücutlarının farklı bölgelerinde kas iskelet rahatsızlığına neden olabilicek çeşitli psikolojik, psikososyal ve fizyolojik faktörlere maruz kalmaktadırlar. İran'da, ağır kamyon sürücüleri arasında kas-iskelet rahatsızlıkarının yaygınlığı endişe edilen bir hususu oluşturmaktadır. Böylece, kas-iskelet rahatsızlıkları yaygınlığı ile farklı faktörlerin arasındaki ilişkinin araştırılması gerekmiştir.
Kesitsel çalışma yöntemi kas-iskelet rahatsızlıkları ortaya çıkması ile faktörlerin ilişkisinin değerlendirilmesi amacıyla uygulanır. 384 İranlı ağır kamyon sürücüsüne güncelleştirilmiş Nordik Kas-iskelet Anketi (NMQ) uygulanmıştır. Ayrıca, hipotez testi kullanarak farklı faktörler ve katılımcılar tarafından bildirilen kas-iskelet rahatsızlıkları arasındaki ilişki değerlendirilmiştir. Lojistik regresyon yöntemi anketin soruları ve farklı vücut bölümleri arasındaki farklı ilişkiyi araştırmak için kullanılmıştır. Ayrıca, Hızlı Bütün Vücut Değerlendirmesi (REBA) tekniği kullanılarak şoförlerin çeşitli pozisyonlarda farklı iş görevleri incelenmiştir.
Sonuçlar sürücülerin %57'sinin alt sırt bölgesindeki rahatsızlıktan muzdarip olduğunu göstermektedir. Ayrıca; boyun, sol omuz, sağ omuz, diz ve üst sırt, kas-iskelet rahatsızlıklarında rapor edilen yüksek prevalans bölge arasında yer aldığı ortaya çıkmıştır. Titreşime maruz kalmanın saat boyun rahatsızlık (p-değeri = 0.00) ve omuz alanı (p-değeri = 0.00) ilişkisi bulunmuş olsa da, böyle bir ilişki alt sırt
rahatsızlık (p-değeri = 0.30) için bulunmamaktadır. Ek olarak 24 matematik denklemiyle kamyon sürücülerinin değişik vücut bölgelerinde yaygın olarak kas-iskelet rahatsızlığı ile anlamlı yordayıcı soruları ve korelasyonları ile gösterilmiştir. REBA yöntemi kamyon sürücüleri üç farklı pozisyonlarında geliştirilmiştir. Ancak direksiyon simidinin arkasında oturma pozisyonu yüksek riskli pozisyon kategorisinde kalmıştır (REBA puanı = 10).
Anahtar kelimeler: Mesleki kas-iskelet bozuklukları, REBA, Lojistik regresyon, Nordik Kas-iskelet AnketiMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Korhan, Orhan2020-08-14T05:28:03Z2020-08-14T05:28:03Z20162016masterThesisNazerian, Ramtin. (2016). Work Related Musculoskeletal Discomfort among Iranian Heavy Truck Drivers . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4445enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/45632020-09-03T23:01:41Zhdl_11129_13Analytical Hierarchy Process To Determine The Weights of Student Outcomes for Engineering Undergraduate Programs for ABET AccreditationNwafor, Chukwudi ThomasIndustrial Engineering--Education--AccrediationAnalytic Hierarchy Process (AHP)student outcomesmultiple-criteria decision making (MCDM)ABET AccreditationIndustrial EngineeringEngineering education is becoming more and more versatile and complex due to a number of courses offered by each engineering department.
The criterion 4. a-k of the Accreditation Board for Engineering and Technology (ABET) consists of 2(two) class of interaction based on the program hard skills and soft skills which cover all the sets of programs. Analytical Hierarchy Process (AHP) is utilized for pair-wise comparison of the student’s outcomes in Engineering Undergraduate Programs of the whole world wide.
In this study, it is attempted to estimate the realistic weights of the criterion 4 using the classical AHP, the weight of the Nine-Level Fundamental Scale of judgments are expressed via numerical scale order to represent the relative important among the multi-criteria decision making (MCDM) by collecting the responses from the diarchy which comprise of 4 affected parties (students, alumni, employees and academic staffs) at the various department of engineering from all parts of the world based on the outcome of the parties by means of survey questionnaires and internet website has been designed also to implement AHP judgments on the outcomes from the criterion 4a-k of the ABET.
The focus of the data collection is to answer the question, “can the engineering undergraduate program demonstrate the level to which students have attained the anticipated student’s outcome?” The evidence of students learning is then used to identify student strengths and weakness related to each of the student outcome for making decision about how to improve the programs teaching and learning process, a defined weight calculated by applying classical AHP method.
The implication of this research is that the faculty members can utilize the weights of the program outcomes generated as a result of this study and implement them for the continuous improvement process.ÖZ: Mühendislik eğitimi her bir mühendislik bölümünde verilen derslerin sayısına bağlı olarak daha çeşitli ve karmaşık hale gelmektedir.
Mühendislik ve Teknoloji Akreditasyon Kurulu’nun (MTAK) 4. kriteri (a-k) programın bileşenlerine göre (Tasarım, Bilim ve Matematik) tüm kümeleri aşağı yukarı kapsayan 2 (iki) sınıf içerir. Bu çalışmada, mühendislik lisans programlarının öğrenci çıktılarının çiftler halinde karşılaştırılması için Analitik Hiyerarşi Süreci (AHS) kullanılmıştır.
Bu çalışmada, klasik AHP yöntemi kullanılarak 4. kriterin gerçekçi ağırlıklarının belirlenmesi amaçlanmıştır. Dünyadaki çeşitli mühendislik bölümlerinden dört gruba (öğrenci, mezun, iş veren ve akademisyen) öğrenci çıktılarının ağırlıklarını dokuz seviyede karşılaştırmaları için bir anket uygulanmıştır. Toplanan cevaplar çok kriterli karar verme çalışmalarının bir parşaçı olarak AHP yöntemiyle 4. kriterdeki öğrenci çıktılarının (a-k) göreli ağırlıklarının belirlenmesinde kullanılmıştır.
Veri toplamanın odağı “mühendislik lisans programı öğrencilerinin öğrenci çıktılarına beklenen ulaşım seviyesini sağladığını gösterebilir mi?” sorusunun cevabını bulmaktır. Daha sonra, öğrencilerin her bir öğrenci çıktısıyla ilgili olarak güçlü ve zayıf yönleri ve klasik AHP ile bulunan ağırlıklar kullanılarak mühendislik bölümlerinin öğretme ve öğrenme süreçlerinin geliştirilmesiyle ilgili karar verilebilir. Fakülte üyeleri bu çalışmayla bulunan ağırlıkları sürekli gelişim süreçlerinde kullanabilirler.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2016. Supervisor: Assist. Prof. Dr. Hüseyin Güden.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Güden, Hüseyin2020-09-03T11:57:21Z2020-09-03T11:57:21Z20162016masterThesisNwafor, Chukwudi Thomas. (2016). Analytical Hierarchy Process To Determine The Weights of Student Outcomes for Engineering Undergraduate Programs for ABET Accreditation. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprushttp://hdl.handle.net/11129/4563enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/46282020-10-12T23:01:06Zhdl_11129_13The Impact of Musculoskeletal Discomfort on Traditional Education System and Tablet-Assisted Education System: A Comparative StudyUyal, Banu NumanIndustrial EngineeringHuman and ErgonomicsMachine Systems--ErgonomicsTablet ComputerMusculoskeletalPhysical discomfortrisk assessment modeltablet-assisted educationtraditional educationchildren/adolescentWith the advances in the technology, computers are more involved in education, with
various forms. Especially tablet computers are actively used for educational purposes.
Given the fact that musculoskeletal development of children and adolescents is still
continuing, potential musculoskeletal problems resulting from usage of such
technologies must not be disregarded. The aim of this research is to investigate posture
and musculoskeletal system of students during traditional and tablet assisted education
activities. Descriptive analysis of the literature was conducted to discuss the impact of
traditional education on students. To determine the impact of tablet assisted education
system, a survey was conducted on to 406 students, and Logistic Regression Analysis
was carried out to identify the correlation between musculoskeletal discomfort and
tablet computer use. The validation of the risk factors determined in the model was
tested by applying Analysis of Variance to the Surface Electromyogram records for
the control and experimental groups. The results of the statistical analysis revealed that
the physical discomforts due to tablet computer use are intensively experienced in
neck, upper back, lower back, and shoulder regions, which are very similar to those
experienced in traditional education. Reading and writing activities have an impact on
the shoulders, upper back, and left upper arm. The developed risk assessment model
shows that both educational and extra-curricular activities create significant risk
factors for physical discomfort.
Keywords: physical discomfort, risk assessment model, tablet-assisted education,
traditional education, children/adolescent.ÖZ:
Bilgi ve İletişim Teknolojileri cihazları günümüzde yaygın olarak kullanılmaktadır.
Özellikle, çocuklar ve/veya ergenler çok erken yaşlarda bu cihazları kullanmaya
başlamakta ve bu tür cihazların kullanımı, çocukların kas iskelet sistemlerinde olası uzun
vadeli etkiler yaratması açısından kritik bir durum arzetmektedir. Çocuklarda özellikle
eğitim amaçlı tablet bilgisayar kullanımınının neden olduğu kas-iskelet sistemi rahatsızlığı
ile ilgili yeterli çalışma bulunmamaktadır. Bu araştırmanın amacı, öğrencilerin geleneksel
eğitim ve tablet destekli eğitim faaliyetlerindeki duruş ve kas iskelet sistemini
araştırmaktır. Geleneksel eğitimin öğrenciler üzerindeki etkisi, bu alandaki literatürün
kapsamlı bir analizi ile tartışılmıştır. Tablet destekli eğitim sisteminin etkisini belirlemek
için, 406 öğrenciye anket dağıtılmış ve kas iskelet sistemi rahatsızlığı ile tablet bilgisayar
kullanımı arasındaki korelasyonu analiz etmek için Lojistik Regresyon Analizi
yapılmıştır. Modelde belirlenen risk faktörlerinin geçerliliği, kontrol ve deney grupları için
Yüzey Elektromiyogram kayıtlarına Varyans Analizi uygulanarak test edilmiştir.
İstatistiksel analiz sonuçları, boyun, üst sırt, alt sırt, bel ve omuz bölgelerinde tablet
bilgisayar kullanımına bağlı fiziksel rahatsızlıkların yoğun olarak yaşandığını ve bunların
geleneksel eğitimde karşılaşılanlarla çok benzer olduğu tespit edilmiştir. Okuma ve yazma
etkinliklerinin ise, omuzlar, üst sırt ve sol üst kol üzerine etki yarattığı görülmüştür.
Yapılan risk değerlendirme modeli sonucunda hem eğitim hem de müfredat dışı
aktivitelerin fiziksel rahatsızlık için önemli risk faktörleri oluşturduğu görülmektedir.
Anahtar Kelimeler: fiziksel rahatsızlık, risk değerlendirme modeli, tablet destekli eğitim,
geleneksel eğitim, çocuklar / ergenler.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Korhan, Orhan2020-10-12T12:32:40Z2020-10-12T12:32:40Z20182018doctoralThesisUyal, Banu Numan. (2018). The Impact of Musculoskeletal Discomfort on Traditional Education System and Tablet-Assisted Education System: A Comparative Study. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4628enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/47022020-10-28T00:01:02Zhdl_11129_13Human Safety at EMU Registrar OfficeHamdan, Mohammad A. KH. NajeebIndustrial EngineeringWork Environment--Human SafetySafety EngineeringDesign of Work SystemsHuman SafetyAnthropometricIlluminationNoiseHazardsIn this research study, the safety issues of a specific work place environment was studied. The registration department at the Eastern Mediterranean University was selected as the field of study. The physical hazards and human factors in the workplace environment were focused and chosen, anthropometric measurements, illumination rates, sound level pressure, and the equipments used by the staff of that department were analyzed and studied. Additionally, the effects of working conditions on the safety and health of the personnels of this department were explored.
This study is very important to address the existing problems for the selected work place to establish safety rules recommendations to avoid risks or hazards that the staff of the department is subject to.
Twenty employees from registration department were selected and participated in this study, there ages between 19 and 56 years old. Fifteen kinds of anthropometric and physical measurements were used, twelve type of vision and sight were done parallel to the measurements of illumination levels at 32 position of the whole place in the ground floor of EMU registrar office, consequently, the air conduction test was applied to recognize the degree of hearing loss for all employees at EMU registrar office, in addition to the sound level pressure at each place and corner of the registration office.
The staff of registration department was informed at the beginning that human safety is the main issue of this research.
All personnel should have a safe working environment in which every employed
iv
person health is well maintained and should not be subject to any hazard.
The anthropometric measurements were including: body height, shoulder height, shoulder elbow height, buttock-to-popliteal length, deviation, percentiles, minimum and maximum value of anthropometric dimensions, popliteal height, knee height, forearm length, hip width, elbow sitting height, sitting height, sitting eye height and overhead stretch height. The mean, Standard deviation, percentiles, minimum and maximum value of anthropometric dimensions were calculated.
The results of study showed that there are significant differences between male and female body dimensions, and there is a negative effect on vision and hearing.
The current layout was found to fail to comply with ergonomy design criteria. A new design of furniture was proposed to improve the level of comfort.ÖZ: Bu araştırmada belirli bir işyeri ortamının güvenlik konuları üzerinde durulacaktır. Doğu Akdeniz Üniversitesi kayıt bölümü çalışma alanı olarak seçilmiştir. İşyeri ortamındaki fiziksel tehlikeler ve insan faktörleri üzerinde durulacak, seçilecek, antropometrik ölçümler, aydınlatma oranları, ses düzeyi basıncı ve o bölüm personeli tarafından kullanılan ekipmanlar analiz edilecek ve incelenecektir. Çalışmada işyeri ortamındaki fiziksel tehlikeler ve insan faktörleri üzerinde durulacak, seçilen antropometrik ölçümler, aydınlatma oranları, ses düzeyi basıncı ve o bölüm personeli tarafından kullanılan ekipmanlar analiz edilip ve incelenecektir. Ek olarak, çalışma koşullarının bu bölümdeki personelin güvenliği ve sağlığı üzerindeki etkileri araştırılacaktır.
Bu çalışma, seçilen işyerinde, bölüm personelinin tabi olduğu riskleri veya tehlikeleri önlemek, güvenlik kuralları için tavsiyeler oluşturmak ve mevcut sorunları gidermek için çok önemlidir.
Kayıt bölümünden yaşları 19 ile 56 arasında değişen 20 çalışan seçilmiş ve çalışmaya katılmıştır. On beş değişik antropometrik ve fiziki ölçüm bu çalışmada kullanılmış, DAÜ kayıt ofisinin zemin katındaki tüm yerin 32'inci konumundaki aydınlatma seviyelerinin ölçümüne paralel olarak on iki görme ve görüş gözlemi yapılmış ve hava iletimi testi ofisteki tüm çalışanların işitme kayıp derecesini ve kayıt ofisinin her bir noktasındaki ses düzeyi baskısını tanınması için uygulanmıştır.
Kayıt bölümünün personeli, bu araştırmanın ana konusunun insan güvenliği olduğu hakkında bilgilendirildi.
vi
Tüm personelin, sağlık durumlarının iyi korunduğu ve herhangi bir tehlikeye maruz kalmayacağı güvenli bir çalışma ortamına sahip olması gerekir.
Antropometrik ölçümler: vücut yüksekliği, omuz yüksekliği, omuz dirsek yüksekliği, kalça-popliteal uzunluğu, sapma, yüzdelikler, antropometrik boyutların minimum ve maksimum değeri, popliteal yükseklik, diz yüksekliği, önkol uzunluğu, kalça genişliği, dirsek oturma yüksekliği , oturma yüksekliği, oturma göz yüksekliği ve havai esneme yüksekliğini içermektedir. Antropometrik boyutların ortalama, standart sapma, yüzde, minimum ve maksimum değerleri hesaplandı.
Çalışmanın sonuçları erkek ve bayan vücut ölçüleri arasında önemli farklar bulunduğunu ve bunun görme ile işitme üzerinde olumsuz etkileri olduğunu göstermiştir.
Mevcut düzen, ergonomi tasarım kriterlerine uymadığı tespit edildi. Konfor seviyesini iyileştirmek için yeni bir mobilya tasarımı önerildi.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assoc. Prof. Dr. Adham Mackieh.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Mackieh, Adham2020-10-27T12:05:33Z2020-10-27T12:05:33Z20172017masterThesisHamdan, Mohammad A. KH. Najeeb. (2017). Human Safety at EMU Registrar Office. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4702enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/49022021-06-07T23:01:05Zhdl_11129_13Simultaneous Scheduling of Preventive Maintenance and Production for Single and Parallel MachinesAbdelrahim, Elmabrok H.Industrial EngineeringProduction ManagementProductionPreventive MaintenanceSingle machineMulti-machineIntegrating ScheduleIn the last decades, the simultaneous scheduling of production and preventive maintenance has been receiving a considerable attention. Initially, in most researches, maintenance activities were treated as tasks with a fixed period. However, this assumption leads to create a hole in the time horizon. Recently, the variations in maintenance times were addressed, but the starting time is still fixed and known in advance in most of the works. There are few researches that consider the maintenance starting times as decision variables, especially in the non-preemptive case. In this study, the expected total completion time is minimized in the case of a single machine and random failures. The probability of machine failure is an increasing function of the age and the length of the time interval, and preventive maintenance reduces the machine age to zero. The problem is represented by a nonlinear integer programming model which is reduced later to an unconstrained 0-1 optimization problem. Subsequently, a method for solving the unconstrained model by identifying the preventive maintenance decisions is proposed.
Moreover, the problem for minimizing the expected makespan on the single machine for the same above mentioned maintenance conditions is addressed and two heuristics methods were proposed to solve the problem.
Additionally, the problem of parallel machines which are under the same reliability conditions, but they may have different values of maintenance parameters is discussed. An approximation method based on the bin packing‟s first fit algorithm as well as an exact branch and bound method were introduced to solve the problem.
Finally, numerical examples were provided to illustrate each solution procedure of the proposed methods and some analysis was performed. The results show the benefits of integrating both decisions of production and maintenance, because some savings in the values of the discussed performance measures were obtained.ÖZ:
Son yıllarda, üretim ve koruyucu bakımın aynı anda çizelgelendirilmesi büyük oranda dikkat çekmeye başladı. Önceden, çoğu araştırmada, bakım etkinlikleri belli dönemlerde yapılan işler olarak değerlendiriliyordu. Ancak bu varsayım zaman ufkunda bir boşluk oluşmasına neden oluyordu. Son zamanlarda yapılan çalışmalarda, bakım zamanlarındaki değişiklikler de ele alınmış, ancak bakım başlangıç zamanı sabit ve çoğunda da bu zaman önceden biliniyor. Bakım başlama zamanlarını karar değişkeni olarak kullanan, özellikle önleyici olmayan durumlarda, az sayıda araştırma bulunmaktadır. Bu çalışmada, tek makine ve rassal arıza durumunda toplam tamamlama süresi enküçüklenmiştir. Makine arızası olasılığı, makine yaşının ve zaman aralığı uzunluğunun artan bir fonksiyonudur ve koruyucu bakım, makine yaşını sıfıra indirir. Bu problem, doğrusal olmayan tamsayılı programlama modeli olarak gösterilmiş ve daha sonra da kısıtsız bir 0-1 optimizasyon problemine indirgenmiştir. Devamında da, koruyucu bakım kararlarını tanımlayarak kısıtsız modeli çözecek bir yöntem önerilmiştir.
Ayrıca tek makine ve yukarıda bahsedilen bakım koşullarında tüm işlerin tamamlanma süresini enküçükleyecek iki sezgisel yöntem önerilmiştir.
Bunlara ek olarak, aynı güvenilirlik koşullarında ancak farklı bakım parametre değerlerine sahip paralel makineler de tartışılmış ve problemi çözmek için pin paketleme ilk fit algoritması ve yanısıra kesin dal-sınır yöntemine dayanan bir yaklaşıklama yöntemi de sunulmuştur.
Son olarak, önerilen her yöntemin çözüm yordamlarını gösteren sayısal örnekler verilmiş ve bazı çözümlemeler yapılmıştır. Sonuçlar, performans göstergelerindeki iyileşmelerden dolayı, üretim ve bakım kararlarının bütünleştirilmesinin yararlarını göstermektedir.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2021-06-07T06:57:52Z2021-06-07T06:57:52Z20172017doctoralThesisAbdelrahim, Elmabrok H.. (2017). Simultaneous Scheduling of Preventive Maintenance and Production for Single and Parallel Machines. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4902enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/49422021-06-09T23:01:32Zhdl_11129_13Modified Data Envelopment Analysis of Multiple Response Experiments in the Robust Parameter Design ProceduresAdesina, Kehinde AdewaleIndustrial EngineeringRobust controlQuality Control SystemsVRS modified and penalization coefficientrobust parameter optimizationDEA discriminationintegrated exergetic-data envelopment analysismulti-response robust parameter proceduresSelecting the optimum process parameter level setting for multi-quality processes is cumbersome. Robust parameter designs procedure that utilizes different strategies for improving performance/productivity during product and process design so that quality response can be obtained efficiently and optimally. An inevitable problem that is associated with the product and process design is in appropriating process variables that will yield optimal response. The complexity of the problem is peculiar with multiple response experiments (processes) where different factor level combinations yield varying responses. Previous methods are plagued with complex computational search, unrealistic assumptions, ignoring the interrelationship between responses and failure to select optimum process parameter level setting. This thesis proposes the implementation of modified variable return to scale (VRS) data envelopment analysis in the Robust Parameter Design (RPD) procedures to estimate and optimize responses of all non-dominated (significant) factors level combinations in multi-response experiments. This study also enhances the discriminatory tendency of the model by imposing VRS partitioning within the model.
The model is conducted in a manner that with an adequate BPNN topology, experiment with incomplete, missing or censored data whenever encountered, could be investigated. Here, standard DEA modes are allowed to self-assess, the upper bound is restricted and the VRS penalization coefficient is adopted to determine the optimum process parameter level setting. The proposed procedures are applied to seven different case studies and the results were compared with existing methods of principal component analysis (PCA), DEA based ranking approach (DEAR), genetic
algorithm (GA), grey relational analysis (GRA) and benevolent formulation (BF). The effectiveness of the proposed model measured by the total anticipated improvement yielded the highest total improvement over the existing methods. In overall, many inefficient DMUs that would have been promoted as efficient by the standard DEA models were revealed. The discriminative tendency further gives insight to DMUs that are within the convex set of the factor level settings and those that are not, thereby making the computation search for the optimal easy and simple.ÖZ:
Çok kaliteli işlemler için optimum işlem parametre seviyesi ayarının seçilmesi zahmetlidir. Ürün ve süreç tasarımı sırasında performans / üretkenliği arttırmak için farklı stratejilerden yararlanan sağlam parametre tasarımları prosedürü, böylece kalite yanıtının verimli ve optimal bir şekilde elde edilebilmesi için. Ürün ve süreç tasarımı ile ilişkilendirilen kaçınılmaz bir sorun, optimal yanıtı sağlayacak süreç değişkenlerini kullanmaktır. Problemin karmaşıklığı, farklı faktör seviyesi kombinasyonlarının değişken tepkiler verdiği çoklu cevap deneyleri (süreçleri) ile özeldir. Önceki yöntemler, karmaşık hesaplamalı arama, gerçekçi olmayan varsayımlar, yanıtlar arasındaki ilişkiyi görmezden gelmek ve optimum işlem parametresi seviyesi ayarını seçememekle boğuşmaktadır. Bu tez, çoklu yanıt deneylerinde, baskın olmayan (önemli) faktörler düzeyindeki tüm kombinasyonların yanıtlarını tahmin etmek ve optimize etmek için Sağlam Parametre Tasarımı (RPD) prosedürlerinde, ölçek değiştirmeli (VRS) veri zarflama analizine modifiye değişken getirisinin uygulanmasını önermektedir. Bu çalışma aynı zamanda modelde VRS bölümlendirmesi uygulayarak güçlü parametre prosedüründe modifiye değişken dönüş ölçeğine (VRS) modelin ayrımcı eğilimlerini de arttırmaktadır.
Model, yeterli bir BPNN topolojisi ile, karşılaşılan eksik, eksik veya sansürlenmiş verilerle deneylerin araştırılabileceği bir şekilde gerçekleştirilmiştir. Burada, standart DEA modlarının kendi kendini değerlendirmelerine izin verilir, üst sınır kısıtlanır ve optimum işlem parametre seviyesi ayarını belirlemek için VRS cezalandırma katsayısı benimsenir. Önerilen prosedürler literatürden yedi (7) farklı vaka çalışmasına uygulanmış ve sonuçlar, temel bileşen analizi (PCA), DEA tabanlı
sıralama yaklaşımı (DEAR), genetik algoritma (GA), gri ilişkisel analiz (GRA) ile karşılaştırılmıştır. ) ve yardımsever formülasyon (BF). Önerilen modelin beklenen toplam iyileşme ile ölçülen etkinliği, mevcut yöntemler üzerinde en yüksek toplam iyileşme sağlamıştır. Genel olarak, standart DEA modelleri tarafından verimli olarak tanıtılacak çok sayıda verimsiz DMU ortaya çıkar. Daha da ilginç olarak, faktör seviyesi ayarlarının dışbükey kümesi içinde bulunan ve aramada dikkate alınmaması gereken DMU'lara içgörü sağlayan ayırt edici eğilim, hesaplama raporunu diğer rapor edilen yöntemlere kıyasla kolay ve basit hale getirmektedir.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Assist. Prof. Dr. Sahand DaneshvarEastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2021-06-09T13:01:43Z2021-06-09T13:01:43Z20182018doctoralThesisAdesina, Kehinde Adewale. (2018). Modified Data Envelopment Analysis of Multiple Response Experiments in the Robust Parameter Design Procedures. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4942enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/48692021-02-25T00:01:28Zhdl_11129_13Stochastic Facility Location Problem with Distributed Demands along the Network EdgesGolabi, MahmoudIndustrial EngineeringFacility ManagementFacility location problemDistributed demandQueuing theoryHumanitarian logisticsUAVMetaheuristicsSince 1960s, facility location problem (FLP) has been studied by a myriad number of researchers. Nowadays, it is one of the most prominent branches of operations research which is applied in different fields such as determining the location of warehouses, hazardous materials sites, automated teller machines (ATMs), coastal search and rescue stations, etc. Also, the application of FLP in emergency logistics for choosing the best location of service centers has become rampant recently.
On the premise that demands are uniformly distributed along the network edges, two network location problems are investigated in this study. For both problems, some of the candidate locations will be selected to establish the facilities. The first problem is a multiple-server congested facility location problem. It is assumed that demands are generated according to the Poisson process. Furthermore, the number of servers in each established facility is considered as a decision variable and the service time for each server follows an exponential distribution. Using queuing system analysis, a mathematical model is developed to minimize the customers’ aggregate expected traveling times and the aggregate expected waiting times.
The second problem is a combined mobile and immobile pre-earthquake facility location problem. Each facility is used in the relief distribution operation. It’s incontrovertible that due to earthquakes, some network edges collapse and corresponding areas may lose their accessibility. Thus, it’s assumed that people on intact and accessible edges travel to the location of the distribution centers to receive the relief. For those who are located on collapsed or inaccessible network edges, the
medium-scale Unmanned Aerial Vehicle (UAV) helicopters are utilized in the relief distribution operation. The mathematical model developed for this problem minimizes the aggregate traveling time for both people and UAVs over a set of feasible scenarios. In order to demonstrate the applicability of the model developed, a case study based on Tehran earthquake scenarios is presented.
Since network location problems are NP-hard, three metaheuristic algorithms including genetic algorithm, memetic algorithm, and simulated annealing are investigated and developed to solve the proposed problems.ÖZ: 1960'lardan itibaren tesis yer seçimi problemi çok sayıda araştırmacı tarafından incelenmiştir. Tesis yer seçimi günümüzde de yöneylem araştırmasının en önemli dallarından olup, farklı uygulamalarda örneğin, depo, tehlikeli madde sahaları, bankamatikler (ATM), kıyı arama ve kurtarma istasyonlarının yer seçimi gibi alanlarda kullanılır. Ayrıca, tesis yer seçimi uygulamalarından olan acil durum lojistiğinde en uygun servis merkezi yerinin belirlenmesi problemi de son zamanlarda çok yaygınlaşmıştır.
Bu çalışmada taleplerin şebeke (ağ) boyunca birbiçimli (uniform) dağılımlı olduğu varsayımı ile iki şebeke yer seçimi problemi üzerinde çalışılmıştır. Her iki problemde de, birkaç aday yer arasından birkaç tesis seçilecektir. Birinci problem, çoklu sunucu tıkanık bir tesis konum sorunudur. Taleplerin Poisson sürecine göre oluşturulduğu varsayılmıştır. Ayrıca, kurulu tesislerin her birinde bulunan sunucu sayısı bir karar değişkeni olarak kabul edilmiş ve her sunucu için servis süresi üssel (exponential) bir dağılım izlemektedir. Kuyruk sistemi analizi kullanılarak, müşterilerin beklenen toplam seyahat süreleri ve beklenen toplam bekleme sürelerini en aza indirgemek için bir matematiksel model geliştirilmiştir.
İkinci problem ise, hareketli ve sabit olmak üzere birleşik deprem öncesi tesis konum problemidir. Her tesis yardım dağıtım işleminde kullanılır. Açıktır ki depremlerden dolayı bazı şebeke arklarının (arc) çökmesi ve bundan dolayı bunlara karşılık gelen alanların erişilebilir olmaları sözkonusu olamaz. Böyle durumlarda, sağlam ve erişilebilir arklardaki insanların yardım alabilmek için dağıtım merkezlerine
kendilerinin gittiği varsayılmıştır. Şebekenin çökmüş veya erişimin mümkün olmadığı durumlarda, orta ölçekli İnsansız Hava Aracı (İHA) helikopterleri yardım dağıtım operasyonunda kullanılacaktır. Bu problem için geliştirilen matematiksel model, bir dizi uygun senaryo çerçevesinde, hem insanların hem de İHA’larının toplam seyahat süresini en aza indirir. Geliştirilen modelin uygulanabilirliğini göstermek için Tahran'daki olası deprem senaryolarına dayanan bir vaka çalışması da sunulmuştur.
Şebeke üzerinde tesis yer seçimi problemleri NP-zor olduğundan, önerilen problemleri çözecek genetik algoritma, memetik algoritma ve benzetimli tavlama gibi üç sezgi ötesi (metaheuristic) algoritma araştırılmış ve geliştirilmiştir.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Co-Supervisor: Assoc. Prof. Dr. Jamal Arkat and Supervisor: Assoc. Prof. Dr. Gökhan İzbırak.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Arkat, Jamal (Co-Supervisor)İzbırak, Gökhan (Supervisor)2021-02-24T11:34:46Z2021-02-24T11:34:46Z20172017doctoralThesisGolabi, Mahmoud. (2017). Stochastic Facility Location Problem with Distributed Demands along the Network Edges. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4869enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/48082021-01-06T00:01:05Zhdl_11129_13Cyclic Production of Flexible Manufacturing CellsNejad, Mazyar GhadiriIndustrial EngineeringProduction ManagementFlexible manufacturingCNC machinesRobotic cellCyclic scheduling.MetaheuristicsThis thesis deals with two different flexible manufacturing cells. Both cells contain m identical computer numerical control (CNC) machines that are able to perform all the processes to produce a final product. The CNC machines are set up in a line layout. In the both cases, one input station and one output station exists at the beginning and at the end of the line, respectively. The items to be processed are kept in the input station, and the finished items are kept in the output station. In the second case, in addition to the input station, there is an individual input buffers attached to each machine. Using these buffers, each machine can be consecutively loaded twice in a cycle. In the both cells, a robot serves the machines and transports parts from the input station to a machine, loads the machine, and unloads the machine, after finishing its process, and puts the processed part in the output station.
In these cells, m different parts will be processed in every cycle. Each part is processed completely by one machine. If the system is at a specific state at the beginning of a cycle, it reaches the same state at the end of the cycle, and then repeats the same actions in the same order in the subsequent cycles. To show all of the possible cycles in such cells, a sequential part production matrix is presented considering a general case. The duration of a cycle is called cycle time. The objective function of both cell types is to find the order of robot operations that minimizes the cycle time which maximizes the long-run average throughput rate of each cell.
For the first case, a new mathematical model is presented to optimize the system. A reduced version of the new model is also provided. The reduced version is still an
exact model of the minimization of the cycle time, however it does not determine the waiting times of the robot directly. These two models are more effective than the previous existed exact models in the literature. The solution of the reduced model requires significantly less CPU time comparing to the other models. A metaheuristic algorithm based on simulated annealing algorithm is proposed. In order to compute the minimum cycle time in each iteration of the algorithm, a linear programming model is needed to be solved which is the first case in the literature to the best of our knowledge. A new proof is provided for the lower bound of cycle time. This new proof facilitates the optimality analysis of several sequences of the robot movements.
For the second case, a mathematical model is presented to optimize the cyclic production. A two-machine cell is discussed in details. In addition to some lower bounds of the cycle time for different orders of robot movements, the optimal cycles and upper bounds for the cases with different activities are also investigated.ÖZ:
Bu tez iki farklı esnek imalat hücresi ile ilgilidir. Her iki hücre de, nihai bir ürün üretmek için tüm işlemleri gerçekleştirebilen, aynı sayıda Bilgisayarlı Sayısal Dentim (CNC) makinesini içerir. CNC makineleri bir çizgi düzeninde ayarlanır. Her iki durumda da sıranın başında ve sonunda bir giriş istasyonu ve bir çıkış istasyonu bulunur. İşlenecek parçalar giriş istasyonunda tutulur ve bitmiş parçalar çıkış istasyonunda tutulur. İkinci durumda, giriş istasyonuna ek olarak, her bir makineye bağlı tek bir giriş tamponları bulunur. Bu tamponları kullanarak, her makine ardışık olarak bir döngüde iki kez yüklenebilir. Her iki hücrede de, robot makinelere hizmet eder ve parçaları giriş istasyonundan makineye nakleder, makineyi yükler ve işlemi tamamladıktan sonra makineyi boşaltır ve işlenmiş kısmı çıkış istasyonuna koyar.
Bu hücrelerde, her döngüde m sayıda farklı parça işlenecektir. Her parça bir makina tarafından tamamen işlenir. Sistem bir çevrimin başlangıcında belirli bir konumdaysa, çevrimin sonunda da aynı duruma geçer ve aynı aktiviteleri sonraki çevrimlerde de aynı sırada tekrarlar. Bu tür hücrelerdeki olası döngülerin tümünü de göstermek için, genel durum göz önüne aknarak ardışık parça üretim matrisi sunulmaktadır. Bir döngünün süresi döngü süresi olarak adlandırılır. Her iki hücre tipinin amaç fonksiyonu, her bir hücrenin uzun dönem ortalama çıktı oranını maksimize eden döngü süresini en aza indirecek robot işlemlerinin sırasını bulmaktır.
İlk durumda, sistemi optimize etmek için yeni bir matematiksel model sunulmuştur. Yeni modelin indirgenmiş bir versiyonu da gösterilmiştir. İndirgenmiş versiyon, döngü süresinin en aza indirgenmesinin hala kesin bir modeli olmasına rağmen
robotun bekleme sürelerini doğrudan belirlememektedir. Bu iki model literatürde daha önce var olan kesin modellere göre daha etkilidir. İndirgenmiş modelin çözümü, diğer modellere kıyasla çok daha az CPU zamanı gerektirir. Benzetimli tavlama algoritmasına dayanan sezgi ötesi bir algoritma önerilmiştir. Algoritmanın her yinelenmesinde minimum döngü süresini hesaplamak için doğrusal bir programlama modelinin çözülmesi gerekmektedir. Döngü süresinin alt sınırı için yeni bir ispat gösterilmiştir. Bu yeni ispat, robot hareketlerinin birkaç sırasının optimallik analizini kolaylaştırımaktadır.
İkinci durumda, döngüsel üretimi optimize etmek için bir matematiksel model sunulmuştur. İki makine hücresi ayrıntılı olarak ele alınmıştır. Robot hareketlerinin farklı sıraları için döngü zamanının bazı alt sınırlarına ilaveten, farklı aktivitelere sahip durumlar için optimal çevrimler ve üst sınırlar da araştırılmıştır.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2021-01-05T12:21:31Z2021-01-05T12:21:31Z20182018doctoralThesisNejad, Mazyar Ghadiri. (2018). Cyclic Production of Flexible Manufacturing Cells. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4808enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/48392021-01-07T00:02:42Zhdl_11129_13Supplier Selection in Service Industry Using Analytical Hierarchy ProcessSaidbek, SulkhiyaiIndustrial EngineeringManufacturing processes--SuppliersService systemsSupplier selection in hotel businessMultiples-Criteria Decision Makings (MCDMs)Analytic Hierarchy Process (AHP)Every production system including the tourism industry which creates services to customer satisfaction is directly part of supply chain must have its contractor and decisions about the appropriate suppliers. For hotels are a major issues of concern since its assumption will deploy an inclusive choice of scientific co-operation extended within a particular era. For as we all know that, every firm hugely depends on a reliable supplier for their products, therefore suppliers play vital role to make any organization reach the peak of cost efficient and profitable. Supplier selection (SS) has a great impact on integration of the Supply Chain Relationship (SCR), and the best supplier will greatly help to enterprises efficiency between supply chain (SC) partners and consequently enhance organizational performance. To the best of our knowledge, there are many studies regarding supplier selection for various industries, most of them are good production systems and only few are related to service industry. However, there is no study for hotel business. In this study we are considering some significant factors to determine which of them is the most important to be accepted when making a selection for the right supplier in hotel business. Via evaluating the weight of each factor using Analytic Hierarchy Process (AHP), through Pair-wise Comparison Matrix’s (PWCMs) of a given criteria and the weight of the numerical scale of judgment are used to represent the relative important among the Multiple-Criteria Decision Makings (MCDMs). For evaluating and selecting the best supplier in hotels was a realistic attempt by implementing a survey questionnaire which was sent to the top managers in various
hotels through a well-designed internet web-site which was used to justify the AHP
judgment from the decision makers (DM) or experts.
For assigning the efficacy and accuracy of the identified criteria and their weights the
real life application is applied to a hotel in Cyprus. The landscape and geography of
Cyprus gives potential to run a hotel business, and therefore this part of touristic
industry has succeed high degree of competitiveness. The facilitated and determined
weights of criteria in real life may provide a privilege for hotels to analyze
alternative suppliers and make the best decision.
The main contribution of this study is that utilize weight of the criteria is used to
enhance the efficiency and flexibility of the supply network and selection process for
continuous improvement of hotel business.ÖZ:
Müşteri memnuniyeti için servis sunan turizm sektörü de dahil tüm üretim sistemleri
bir tedarik zincirinin parçasıdır ve uygun tedarikçileriyle ilgi karar vermelidir. Oteller
için tedarikçi seçimi en önemli meselelerden biridir çünkü nasıl yapılacağı belli bir
alanda kapsamlı bir bilimsel katılım gerektirir. Tüm sistemler büyük oranda
tedarikçilerine bağlıdırlar ve bu sebeple tedarikçiler sistemin maliyeti ve etkinliğinde
hayati rol oynarlar. Tedarikçi seçimi tedarik zincirindeki ilişkilerin kurulmasında
büyük etkiye sahiptir. Doğru tedarikçi tahminleri, işletmelerin uygun tedarik zinciri
ortakları bulmasına ve dolayısıyla kuruluşun performansını geliştirmesine yardımcı
olur. Bir otel için yeni bir tedarikçi seçerken kararımızla ilgili tüm faktörleri
(kriterleri) dikkate almalıyız. Bildiğimiz kadarıyla litaratürde çeşitli sektörler için
tedarikçi seçimiyle ilgili çok sayıda çalışma vardır. Bnuların çoğu imalat sistemlerini
ele alırken çok az bir kısmı servis sistemleriyle ilgilidir. Bununla birlikte, otel
işletmeciliğinde tedarikçi seçimini ele alan bir çalışma yoktur.
Bu çalışmada otel işletmeciliğinde doğru tedarikçi seçimi için kullanılabilecek
kriterleri ve içlerinden en önemlilerini belirledik. Analitik Hiyerarşi Proses (AHP)
yontemi ile bu kriterlerin ağırlıkları belirlenirken kriterler arasındaki göreli
ağırlıklara dayalı karşılaştırma matrislerini kullandık. Birçok otelin üst kademe
yöneticilerine iyi hazırlanmış bir anketi internet ortamında uygulayarak AHP için
gerekli karşılaştırma matrislerini oluşturduk ve böylece otel işletmeciliğinde
tedarikçi seçimini için gerçekçi sonuçlar elde etmeyi amaçladık.
Belirlenen kriterlerin ve ağırlıkların etkinliğini ve doğruluğunu görebilmek için
Kıbrısta bir otelde gerçek hayat uygulaması yaptık. Kıbrıs’ın manzarası ve coğrafyası
turizm sektörü içerisinde otelciliğin kullanımı için bir potansiyel sunmaktadır.
Dolayısıyla da bu alanda yüksek bir rekabet söz konusudur. Belirlenen kriterler ve
ağırlıklar gerçek hayatta otellere tedarikçi seçeneklerini değerlendirmede ve en iyi
seçimleri yapmada bir ayrıcalık verebilir.
Bu çalışmanın ana katkısı otel işletmeciliğinde sürekli iyileşme kapsamında tedarikçi
seçimiyle ilgili esnek ve etkin criterleri ve ağırlıkları kullanmasıdır.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2017. Supervisor: Assist. Prof. Dr. Hüseyin Güden.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Güden, Hüseyin2021-01-06T07:59:38Z2021-01-06T07:59:38Z20172017masterThesisSaidbek, Sulkhiyai. (2017). Supplier Selection in Service Industry Using Analytical Hierarchy Process. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4839enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/48162021-01-06T00:01:14Zhdl_11129_13Logistics of Aerial Delivery SystemsShavarani, Seyed MahdiIndustrial EngineeringDrone Delivery Systems--Aerial Delivery Systems--Technological innovationsHierarchical Facility LocationDrone Delivery SystemHybrid Genetic AlgorithmEdge-Based Stochastic DemandSupply Chain ManagementDoctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Assoc. Prof. Dr. Gökhan İzbırak.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)İzbırak, Gökhan2021-01-05T14:10:00Z2021-01-05T14:10:00Z20182018doctoralThesisShavarani, Seyed Mahdi. (2018). Logistics of Aerial Delivery Systems. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4816enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/47242020-11-21T00:01:04Zhdl_11129_555hdl_11129_396THE IMPACT OF INTERCONTINENTAL CONCERTS IN PROMOTING HARMONY AND SYMPATHY DEVELOPMENT AMONG PEOPLEMOHSENI ZONOOZI, ShahedMOSALLAEIPOUR, SamNAZERIAN, RamtinInterContinental Concertsmutual emotional connectionIntercontinental Music AwardsMusic and PeaceICCIntercontinental ProjectsVisual Arts and Music BusinessShahed MOHSENI ZONOOZIThis article reports the impact of a series of cultural programs known as "InterContinental
Concerts" in developing a mutual understanding among people with different ethnicities as well as
cultural backgrounds and ideologies. Considering the fact that scientific and purposeful use of art
contributes to initiating and developing mutual emotional connection among people and stimulates them
to be more cooperative, understanding, and sympathetic; the purpose of the projects was to support the
idea of a world without discrimination, oppression, and violence using music and performing arts as the
most effective means.2020-11-20T13:22:42Z2020-11-20T13:22:42Z2020-11-20reporthttp://hdl.handle.net/11129/4724enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/48912021-03-29T23:00:11Zhdl_11129_13How to Organize Society in a Refugee Camp?Lalehlou, Negar AkbarzadehIndustrial EngineeringRefugee Camps - Social Relations - Social AspectsRefugee Camps - Social Relations - Social AspectsRefugee Camps - Design and ManagemetRefugee Camps - Design and ManagemetDurable solution, prolonged refugee camp, society of refugee camp, refugee camp designABSTRACT: As obligatory immigrant is the outcome of the world’s conflicts, displaced
population from all unstable regions of world. They stay in camps in long periods
and need ‘durable solutions’ according to their geographic and technical conditions
for decades. Prolonged dislocation consequences from procedures in the local and
global level. This prolonged condition leads to outcomes that backfire each of these
levels, as well as insecurity, over consumption of already limited assets, and tense
interstate relations. While immigrants stay in more and more protracted time,
circumstances that formerly are impermanent seem to be permanence. Forced
displacement all over the world increasingly change to be more in durable life
circumstances, expressing different human impacts of conflict and power fights.
By using a qualitative method in various sides of refugee camps, this study connects
theory of self-government; social life constructs and work distribution to discover the
possible motivation for creating refugee sites durable. House to approximately 2.6
million refugees, camps provide as a microcosm with various and multi-level
humanitarian supports and refugee hosting actions. With analyzing data collected
from UNHCR (United Nations High Commissioner for Refugees) documents, related
articles, media resources and NGO (Non-Governmental Organization) reports, this
research connects the recreation of state self-government, with features of social
construction at the local phase that contribute to prolonged dislocation. Analyses of
this data present planned and unplanned factors coming from foreign and local
actors, NGO disaster and humanitarian aid principles, as well as refugees’ own iv
opinion of residency, identity, and belonging that leads to contribute to the
permanence refugee displacement.
During all these procedures, this study starts on to describe a theory about the
approach of hosting refugees and the way that refugees see themselves, and what
leads to a form of immigration that turn into more and more long-term.
Keywords: durable solution, prolonged refugee camp, society of refugee camp,
refugee camp design.ÖZ: Zorunlu göçmenlik, dünyanın dengesiz yerlerindeki nüfusun yer değiştirmesi ve
dünyadaki anlaşmazlıkların bir sonucu olarak ortaya çıkmıştır. Bu göçmenler,
mülteci kamplarında onyıllardır kalmaktadırlar. Bulundakları yerin coğrafi konumu
ve teknik altayapısı düşünülerek sürdürülebilir çözümlere ihtiyaç duymaktadırlar.
Uzunca süre yerleri değiştirilmiş insanlar (mülteciler) yerel ve küresel işleyen
prosedürlerde etkisi olmaktadır. Bu uzatılmış mülteci durumu sonuç olarak
güvensizlik, limitli olan kaynakların fazla kullanılması ve ülkeler arası gerilimli
durumları ortaya çıkmasına neden olmaktadır. Mültecilerin kaldığı süre uzadıkça, bu
oluşan durum geçici durum geçici olmayan bir hale dönüşmektedir.
Bu çalışma, nitel bir yöntem kullanılarak, özerk yönetimlerde insanlardaki
motivasyonu yeniden canlandırmak için bir sosyal yaşam oluşturulması ve insanlar
arasında iş dağıtımı yapılarak daha sürdürülebilir bir mülteci kampı oluşturulması
amaçlanmıştır. Dünyada yaklaşık 2.6 milyon mültecinin barınmaya ihtiyacı vardır,
mülteci kampları ise mültecilere küçük bir evren oluşturarak onlara her türlü insani
ve barınma desteğini sağlamaktadır. Birleşmiş Milletler Mülteciler Yüksek
Kurulundan (BMMYK) temin edilen belgeler, ilgili makaleler, basın materyalleri ve
SO (Sivil Organizasyon) toplanıp analiz edilmiştir. Bu çalışma, yerel safhada
mültecilerin sosyal yapının özellikleri kullanarak özerk yönetimlerin yeniden
canlandırılmasını sağlamaktadır. Analizi yapılan veri yerel ve yabancı aktörlerden
gelen planlanmış ve planlanmamış faktörleri ortaya koymaktadır. SO felâketi ve
insani yardım prensipleri, mültecilerin kendi ikamet, kimlik ve aidiyet düşüncleri
kalıcı mülteci yerdeğiştimesine katkı sağlamaktadır.vi
Bu araştırma bütün bu süreçlerde mültecilerin nasıl misafir edileceğini, kendilerini
nasıl görmeleri gerektiğini ve uzun vadede mülteciliğin onları neye doğru
götüreceğine anlatan bir teori oluşturmuştur.
Keywords: sürdürülebilir çözümler, uzun süreli mülteci kampları, mülteci
kamplarındaki toplum, mülteci kampı tasarımıMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2019. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2021-03-29T11:07:46Z2021-03-29T11:07:46Z2019-062019-06masterThesisLalehlou, Negar Akbarzadeh. (2019). How to Organize Society in a Refugee Camp?. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/4891enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/50312021-08-16T23:02:53Zhdl_11129_13Failure Modes and Effects Analysis (FMEA) Method Based on Data Envelopment Analysis (DEA) Approach for the Efficiency Measurment of Radio Frequency Identification (RFID)Chnina, KhaoulaIndustrial EngineeringIndustrial productivityFMEARFIDDEAefficiencycost and time based DEADEA based FMEAThere are many papers which emphasize on the benefits of radio frequency identification (RFID) technology implementation in the management and the production. This technology is used in many fields such as inventory, logistics, return management, order picking in a warehouse, assembly and testing and health care Etc. The existing literature examined the efficiency of RFID based on one of the following factors: accuracy, reliability, service enhancement, cost, time, work efficiency, flexibility, interactivity, risk management, emergency, privacy, energy and big Data.
In this research, we will shed the light on the failure modes of this technology by using FMEA Approach, then we will measure the efficiency of solving each of these failures according to their severity, occurrence, detection, cost and time; using data envelopment analysis (DEA). DEA is a non-parametric method that evaluates the efficiency of the collection of decision making units (DMUs) when all of them consume and produce the same inputs and outputs respectively. A DMU can be efficient when it is able to produce more outputs by consuming fewer inputs. This economical point of view transforms the issue into a linear programming problem. Based on DEA concept, each failure mode of the RFID technology will be considered as a DMU, and the above mentioned criteria as inputs/outputs. Then the efficiency of these DMUs will be evaluated by DEA models.ÖZ:
Yönetim ve üretimde radyo frekansı tanımlama (RFID) teknolojisini kullanmanın avantajlarını vurgulayan birçok makale bulunmaktadır. Bu teknoloji envanter, lojistik, iade yönetimi, herhangi depoda sipariş toplama, montaj ve test ve sağlık vb,konularını içermektedir. Mevcut literatür RFID'nin verimliliğini şu faktörlerden birine göre inceledi: doğruluk, güvenilirlik, hizmet geliştirme, maliyet, zaman, iş verimliliği, esneklik, etkileşim, risk yönetimi, acil durum, gizlilik, enerji ve büyük veri.
Bu araştırma, FMEA Yaklaşımı kullanarak bu teknolojinin hata modlarına ışık tutacak, daha sonra bu hataların her birini şiddet, ortaya çıkma, tespit, maliyet ve zamanlarına göre çözme verimliliğini olcecelim bu celismede bu veri DEA kullonerek hesaplanir. DEA, hepsi aynı itici güçleri tüketip aynı çıktıları ürettiğinde, karar verme birimlerinin (DMU'lar) toplanmasının etkinliğini değerlendiren parametrik olmayan bir yöntemdir. Bir DMU, daha az itme tüketerek daha fazla çıktı üretebiliyorsa verimli olabilir. Bu ekonomik bakış açısı, konuyu doğrusal bir programlama problemine dönüştürür. DEA konseptine dayanarak, RFID teknolojisinin her arıza modu bir DMU ve yukarıda belirtilen kriterler girdi / çıktı olarak kabul edilecektir. Daha sonra bu DMU'ların verimliliği DEA modelleri ile değerlendirilecektir.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2021-08-16T11:51:20Z2021-08-16T11:51:20Z20202020masterThesisChnina, Khaoula. (2020). Failure Modes and Effects Analysis (FMEA) Method Based on Data Envelopment Analysis (DEA) Approach for the Efficiency Measurment of Radio Frequency Identification (RFID). Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5031enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/50182021-08-16T23:02:51Zhdl_11129_13Performance Evaluation of After Sale Service in Automotive Industry by Data Envelopment AnalysisHabibi, Amir RezaIndustrial EngineeringIndustrial productivityAutomotive industryData Envelopment Analysis (DEA)PerformanceEfficiencySignificant indexIn this decade, automotive industry has become second big industry in Iran after oil while more than 1 million and 350 thousand cars are produced yearly by different companies and have influenced in most of Iranian’s living and has been considered by government due to sanction against Iran, appreciation of prices and dissatisfaction of customers in after sale services. This study will investigate 88 after sale service dealers belong to Kerman Motor Co. in all over Iran as a sample of the entire automotive industry in Iran. All data (number of customers, human resources, education, equipment, providing pieces and process as 6 inputs and stopped cars more than 48 hours in the repair shop, reworked cars, and customer satisfaction as 3 outputs) has been gathered during 2016-2017 observation of all dealers.
Data Envelopment Analysis (DEA) has been applied as one of the most common evaluation methods for measuring the efficiency of performance of each dealer. Contrary to Iran Standard Quality Institute (ISQI) which sends inspectors to all dealers from all companies to evaluate them yearly by a solid framework and without considering the differences in facilities and population in various regions of Iran, DEA has been utilized in this study to evaluate the dealer’s efficiencies and rank them by their own capacities and potentials. CCR model as one of the basic models of DEA has been used in this study due to its more rigid and inflexible essence in comparison to other models. All weights assigned to inputs/outputs will be analyzed to find out most significant index which is effects inefficiency, also inefficient dealers are compared to efficient dealers with most similar for recognizing the weakness and an improvement plan will be presented for giving insight for inefficient units to be improved at the end.ÖZ: Son on yıl içerisinde İran’da yılda 1 milyon 350 bin araç farklı şirketler tarafından üretiliyor ve bu esnada otomotiv endüstrisi petrol’den sonra İran’da ikinci büyük endüstri haline gelmiştir. Fakat, Dünya’nın İran devletine uyguladığı yaptırımlar yüzünden satış sonrası servislerde (parça değişimi, tamirat, vs.) bir çok İran’lı vatandaşın yüksek fiyatlar karşısında memuniyetsiz olduğu gözlemlenmiştir. Bu çalışma İran’ın otomotiv endüstrisini örneklemek amacıyla İran’da bulunan Kerman Motor’s şirketine ait olan 88 araç servisinde yapılmıştır. Toplanan veri (müşteri sayısı, insan kaynakları, eğitim, ekipman, parça temini ve işlem süresi olarak 6 girdi verisi ve 48 saatir tamirhanede bulunan durmuş araçlar, yeniden çalıştırılmış araçlar ve müşteri memnuniyeti olarak 3 çıktı verisi) 2016-2017 yılları arasında araç servislerini gözlemleyerek toplanmıştır. Her araç servisindeki verimilik performansını ölçmek için oldukça yayın bir metod olan Veri Zarflama Analizi (VZA) kullanılmıştır. İran Stadart Kalite Denetleme Enstitüsü (İSKD) İran’da bulunan bütün araç şirketlerine ait araç servislerine tesis farkı, bölgelerindeki nüfüsların yoğunluğunu gözetmeksizin denetim yapmak amacıyla gözetmen göndermektir buna karşın, VZA araç servislerinin verimliğini ölçerken araç servislerini kapasitelerini ve potansiyellerini göz önüne alarak sınıflandırma yapmaktadır. Daha sabit ve kararlı sonuç almak ve literatürde kullanılmış diğer modellerle kıyas yapabilmek adına VZA ait olan CCR modeli bu çalışmada kullanılmıştır. Girdi/Çıktılara atanan bütün ağırlıklar verimliliği etkilyen en dikkate değer endeksi bulmak için analiz edilecektir. Ayrıca, verimsiz araç servislerinin zayıf noktalarını teşhis etmek için verimli araç servisleri ile karşılaştırılacak ve verimsiz olan araç servisleri için bir iyileştirme planı yapılarak daha sonra nasıl verimli hale gelebilcekleri gösterilecektir.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2019. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2021-08-16T10:42:50Z2021-08-16T10:42:50Z20192019masterThesisHabibi, Amir Reza. (2019). Performance Evaluation of After Sale Service in Automotive Industry by Data Envelopment Analysis. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5018enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/50242021-08-16T23:01:27Zhdl_11129_13Minimization of Emergency Response Time by Incorporating Aerial TransportationBanar, MahdiIndustrial EngineeringEmergency Services--Management--PlanningResponse timeAerial transportationEmergency serviceGenetic AlgorithmIn this thesis, we deal with two different real-life medical emergency service problems. In these problems, we consider a city in which the locations of all the hospitals, medical service centers, and the other emergency care centers are known. In both problems the emergency services are deployed using aerial and ground vehicles for moving towards patients in their locations after receiving a call, performing the initial emergency medical care, and transporting the patients to the hospitals or other medical care facilities. For this reason, the accidents or demands are classified into two types the severity accidents which need aerial vehicles and normal accidents which are operated by ground vehicles. According to the average number of the accidents in each location (node) and the severity of the accident, a weight is assigned to each node. In the first problem, we assume that the ground emergency services are optimal and we just deal with assigning a given number of the aerial vehicles to the hospitals or the medical care centers for the severity accidents or emergency medical demands in a way that the total response time by the aerial vehicles is minimized. In another words, this type of the demands for ground and aerial services are different in this type of the problem.
In the second problem, we are dealing with both ground and aerial medical services together and at the same time. As the number of the accidents or the demands for both ground and aerial services are known and separate. In this type of the problem we are aiming to assign a given number of the aerial and ground vehicles to the hospitals or the medical care centers in a way that the total response time by all the aerial and ground vehicles is minimized.ÖZ: Bu tezde, iki değişik sıhhi acil servis problemi incelenmiştir. Bu problemlerde bahis konusu şehirdeki tüm hastane, sıhhi servis merkezleri ile diğer acil yardım merkezlerinin bulundukları mahallerin bilindiği varsayılmıştır. Her iki problemlerde de acil servis için telefonla talep alınmasını takiben hava veya kara ambulansının atanması ile başlayan süreç, olay mahallinde verilen ilk yardımı takiben hastanın hastane veya diğer bir sıhhi bakım merkezine naklini içerir. Bu gayeyle, talepler olayın ciddiyetine göre iki guruba ayrılarak, çok acil vakalara hava ambulansı, çok acil olmayan durumlarda ise kara ambulansı ataması yapılır. Şehirde ki her bölgeye (düğüm noktasına) o bölgedeki ortalama olay sıklığı ve çok acil olay sıklığı sayıları ile orantılı kat sayı ataması yapılmıştır. İlk problem tipinde, kara ambulans sisteminin en iyi şekilde çalıştığı varsayılarak, sadece hava ambulanslarının, hastane (veya sıhhi bakım merkezlerine), çok acil olaylara en kısa toplam zamanda hizmet sağlayacak şekilde atanmasına çalışılmıştır. İkinci problem tipinde, çok acil ve normal servis taleplerinin sayılarının bilindiği varsayılarak, hem kara hem de hava ambulanslarının aynı zamanda ve birlikte en az toplam talep zamanını sağlayacak şekilde atanmasına çalışılmıştır.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2021-08-16T11:08:05Z2021-08-16T11:08:05Z20182018masterThesisBanar, Mahdi. (2018). Minimization of Emergency Response Time by Incorporating Aerial Transportation. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5024enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/50822021-09-01T23:01:12Zhdl_11129_13Performance Evaluation of Iranian Private Banks Using Data Envelopment Analysis (DEA)Sajadi, KasraIndustrial EngineeringBanks and Banking--IranPrivate BanksBanking efficiencyDEAIranian BanksPrivatizationAssessing performance of any organizations is necessary in guiding their future strategic decisions. Banks also are no exception. The purpose of this study is to
evaluate the performance of 15 Iranian private banks using data envelopment analysis in 5 years period using Data Envelopment Analysis (DEA). The result will help these banks to improve their performances by focusing on inadequate factors and evaluate their efficiency among the competitors.
In the process of evaluating the banks, all of the important indicators are verified and
inputs and outputs have been selected in order to assess the efficiency of the banks based on previous studies and the views of experts in this field. Then, the efficient and inefficient banks and their operational rank were determined. Also, reasons for
inefficiency of banks would have been detected and proposal for improvements would be discussed.
Keywords: Private Banks, Banking efficiency, DEA, Iranian Banks, PrivatizationÖZ:
Herhangi bir kurumun yapacaği performans değerlendirmesi o kurumun gelecekteki stratejik kararlarını belirtemede büyük önem taşimaktadir. Bankalar bu çalişmanın
amacı 15 özel Iran bankasının 5 yıllık bir süre icindeki performansını DEA (Veri Zarflama Analizi) kullanarak değerlendirmek.
Sonuçlar bankaların yetersizliklerine odaklanarak performanslarını geliştirme fırsatı yaratacak. Ayrıca rakipleri ile kıyasla araştırma ve araştirmadaki bankaların ne kadar
etkili olduklarını analiz etme firsatı verecektir.
Bankaların analizi esnasında tüm önemli göstergeler belirlenmiş ve onaylanmıştır,
Ayrıca girdi ve çıktılar da onceki araştırmalara ve alanında uzman kişilerin
fikirlerine başvurularak gerçekleşmiştir. Bunun üzerine yeterli ve yetersiz bankalar
belirlenmiş ve operasyonel sıralamaları oluşturulmuştur.
Buna ek olarak bankaların yetersizlik sebepleri saptanmiş ve iyileştirici projeler için
önerilerde bulunulmuştur.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2019. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2021-09-01T06:29:27Z2021-09-01T06:29:27Z2019-092019masterThesisSajadi, Kasra. (2019). Performance Evaluation of Iranian Private Banks Using Data Envelopment Analysis (DEA). Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5082enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/51632021-11-09T00:01:16Zhdl_11129_13Operator 4.0 and Cognitive ErgonomicsFallaha, MohamadIndustrial EngineeringHuman engineering--Work environment--Industrial safetyWork--ErgonomicsIndustry 4.0Operator 4.0Cognitive ErgonomicsVirtual RealityAugmented OperatorCyber-Physical Systems (CPS)Internet of Things (IoT)Big DataArtificial Intelligence (AI)Smart FactoryWith the dawn of industry 4.0, a paradigm shift must occur where the traditional work environment and manufacturing proclivities must transform into a dynamic cyber-physical systems where humans and machines work together for increased productivity and flexibility. This novel and unique work relationship will require unconventional interactions between operators and machines, which will inevitably necessitate an upgrade from the traditional operator to Operator 4.0 or Smart Operator. Engineers and operators must ameliorate their cognitive skills to adapt to Industry 4.0 working environment. Also, smart operators will be required to obtain certain cognitive skills pertaining to wearable technology, sensors or virtual reality equipment as this equipment enhances cognitive capabilities of the Operator 4.0. This research thesis bestows an analysis of Industry 4.0. And provide an evaluation of the topical state of cognitive ergonomics of Smart Operator or Operator 4.0. Considering the importance of VR applications in manufacturing, this research aims to find the cognitive skills required for Operator 4.0 in future factories. The methodology used in this research is based on a factory simulation in Virtual Reality environment. The simulation is similar to Industry 4.0 factories. Participants’ feedback and responses to the given task will help further emphasize how useful can VR in manufacturing be of a help to train future workers. Also, it can assist future designers to avoid any Graphical User Interface (GUI) issues (such as defaults in the 3D simulation as well as the controller software that is used to control the machines) and to improve the quality of such application for a better and more convenient experience.
Keywords: Industry 4.0, Operator 4.0, Cognitive Ergonomics, Virtual Reality, Augmented Operator, Cyber-Physical Systems (CPS), Internet of Things (IoT), Big Data, Artificial Intelligence (AI), Smart FactoryÖZ: Industry 4.0 (I 4.0) doğuşu ile geleneksel iş çevresi ve üretim eğiliminin bir paradigma kayması ile dinamik, siber-fiziksel sistemlere yönelmesini gerekmektedir. Bu sayede insanlar ve makineler üretim ve esnekliğin artması için birlikte çalışmaktadır. Bu yeni ve benzersiz iş ilişkisi, uygulayıcıların ve makinelerin geleneksel olmayan etkileşimine ihtiyaç duyacaktır. Bu nedenle geleneksel uygulayıcıdan Operator 4.0'a veya Smart Operator 'e yükseliş kaçınılmaz bir ihtiyaçtır. Mühendisler ve uygulayıcılar Industry 4.0'ın iş ortamına ayak uydurmak için bilişsel becerilerini geliştirmelidirler. Ayrıca, Smart Operator'lerin giyilebilen teknoloji, sensörler veya sanal gerçeklik ile ilgili belirli bilişsel becerilere sahip olmaları gerekmektedir. Çünkü bu donanımlar Operator 4.0'ın bilişsel işlem kabiliyetini artırmaktadır. Bu araştırma makalesi, Industry 4.0 analizini ve Smart Operator veya Operator 4.0'ın bilişsel ergonomisinin güncel durum değerlendirmesini sunmaktadır. Sanal gerçeklik uygulamalarının üretimdeki önemi düşünüldüğünde bu araştırma gelecekteki fabrikalarda Operator 4.0’ün ihtiyacı olan bilişsel becerileri tespit etmeyi amaçlamaktadır. Bu araştırmada yöntem olarak Sanal Gerçeklik (VR) ortamında bir fabrika simulasyonu kullanılmıştır. Simulasyon, Industry 4.0 fabrikalarına benzerlik göstermektedir. Katılımcıların verilen göreve geri bildirimleri ve cevapları gelecekteki işçileri eğitmede VR’ın ne kadar kullanışlı olduğunu vurgulamaya yardımcı olacaktır. Buna ek olarak, gelecekteki tasarımcılara Grafiksel Kullanıcı Arayüzü (GUI) sorunlarından (örneğin 3D simulasyon hataları ve de makineleri kontrol etmede kullanılan yazılımdaki hatalar) kaçınmada ve daha iyi ve elverişli bir deneyim için böyle bir uygulamanın kalitesini artırmaya yardımcı olabilecektir.
Anahtar Kelimeler: Industry 4.0, Operator 4.0, Kognitif Ergonomi, Sanal Gerçeklik, Geliştirilmiş Operatör, Siber-Fiziksel Sistemler (CPS), Internet of Things (IoT), Big Data, Yapay Zeka (AI), Akıllı FabrikaMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2019. Co-Supervisor: Assoc. Prof. Dr. Qasim Zeeshan, Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Zeeshan, Qasim (Co-Supervisor)Korhan, Orhan (Supervisor)2021-11-08T07:08:00Z2021-11-08T07:08:00Z20192019-12masterThesisFallaha, Mohamad. (2019). Operator 4.0 and Cognitive Ergonomics. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5163enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/51242021-10-15T23:01:19Zhdl_11129_13Continuous Approach for the Transportation of Relief Items in Post-disaster Period of Large Scale EarthquakesRadnezhad, FereshtehIndustrial EngineeringTransportation EngineeringTraveling salesman problemtransportation problemtruck- UAVpost disaster responselarge scale earthquake and humanitarian logisticIn the past decade, the use of an unmanned aerial vehicle (UAV) or drone which was
mostly used in the military has been increased. They came up with this idea as an
alternative to use the (UAV) transportation system instead of the usual package
delivery (road transportation with trucks) also, as an additional tool (consider the truck
as a station for UAV) for packages allocations in order to speed up the whole
procedure. In this dissertation we extended and implemented the hybrid routing model
by determining launching point and retrieve point subsequently for all these
modification effect on operation time, consequently, in our own case, which is
humanitarian logistics, it can rescue and save more people's lives.
Keywords: traveling salesman problem, transportation problem, truck- UAV, post
disaster response, large scale earthquake and humanitarian logisticÖZ:
Son on yılda, insansız hava araçları (İHA) veya çoğunlukla askeriyede kullanılan
drone kullanımları artırıldı. Tüm prosedürü hızlandırmak adına, (İHA) ulaşım
sistemini, alışılagelmiş paket teslimatına (kamyonlarla karayolu taşımacılığı) bir
alternatif, ayrıca paket tahsisi için ek bir araç olarak (kamyonu İHA için bir istasyon
olarak düşünürsek) kullanma fikriyle geldiler. Bu tezde, başlangıç noktasını ve geri
alma noktasını belirleyerek hibrit yönlendirme modelini genişlettik ve uyguladık,
ardından, bu işlemleri operasyon süresi üzerindeki tüm bu modifikasyon etkileri için
yaptık. Sonuç olarak, insancıl lojistik olan bizim örneğimizde, daha fazla insanın
hayatı kurtarılabilir.
Anahtar kelimeler: gezgin satıcı problemi, nakliye sorunu, kamyon- İHA, afet
sonrası müdahele, büyük ölçekli deprem ve insancıl lojistikMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2021-10-15T12:12:56Z2021-10-15T12:12:56Z20202020-01masterThesisRadnezhad, Fereshteh. (2020). Continuous Approach for the Transportation of Relief Items in Post-disaster Period of Large Scale Earthquakes. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5124enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/52502021-12-04T00:01:22Zhdl_11129_13An Evaluation of Efficiency, Productivity and Sustainability of the Hotel Industry in Tunisia using a Two-stage DEA methodEl Alaoui, Maryam HachimiIndustrial EngineeringIndustrial productivity--MeasurementBootstrappingDEAEfficiencyHotel industryMalmquist productivity indexProductivitySustainabilityTobit regression modelHotel industry is a very important domain of the tourism industry that is known for its large presence and growth. This service industry does not only consume a huge amount of resources (water, electricity, fuel…) but also intensifies the environmental problems. There have been very little work directed towards sustainability in the hotel industry. An understanding of the situation of the hotel industry and its relationship to sustainability may help improve the performance of this industry while taking into account the economic, social and environmental concerns of sustainability. To investigate the performance of the hotel industry, first, two-stage data envelopment analysis (DEA) method is used to evaluate the efficiency of the hotel industry in the tourist regions of Tunisia for the period 2014-2015. Next, the impact of a number of independent sustainability variables on the efficiency of hotel industry is tested using Tobit regression model. Finally, the Malmquist productivity index is assessed to examine the level of productivity in hotel industry of the tourist regions in Tunisia. The results reveal that the average efficiency of the hotel industry in Tunisia is 66.83% for 2014 and 61.41% for 2015, and the average productivity is 57.18%. The results conclude that sustainability has a positive impact of the efficiency of the hotel industry. The results of this thesis provide understanding on ways to improve the performance of the hotel industry and the sustainable development.
Keywords: Bootstrapping, DEA, Efficiency, Hotel industry, Malmquist productivity index, Productivity, Sustainability, Tobit regression model.ÖZ:
Otel endüstrisi, büyük varlığı ve büyümesiyle bilinen turizm endüstrisinin çok önemli bir alanıdır. Bu hizmet endüstrisi sadece büyük miktarda kaynak (su, elektrik, yakıt ...) tüketmekle kalmaz, aynı zamanda çevre sorunlarını da yoğunlaştırır. Otel endüstrisinde sürdürülebilirliğe yönelik çok az çalışma yapılmıştır. Otel endüstrisinin durumunu ve sürdürülebilirlikle ilişkisini anlamak, sürdürülebilirliğin ekonomik, sosyal ve çevresel kaygılarını dikkate alarak bu endüstrinin performansını artırmaya yardımcı olabilir. Otel endüstrisinin performansını araştırmak için, 2014-2015 dönemi için Tunus'un turistik bölgelerinde otel endüstrisinin etkinliğini değerlendirmek için ilk önce iki aşamalı veri zarflama analizi (VZA) yöntemi kullanılmıştır. Daha sonra, bir dizi bağımsız sürdürülebilirlik değişkeninin otel endüstrisinin verimliliği üzerindeki etkisi Tobit regresyon modeli kullanılarak test edilmiştir. Son olarak, Malmquist verimlilik endeksi, Tunus'taki turizm bölgelerinin otel endüstrisindeki verimlilik seviyesini incelemek için değerlendirildi. Sonuçlar, Tunus'taki otel endüstrisinin ortalama verimliliğinin 2014 için 66,83 %ve 2015 için 61,41% olduğunu ve ortalama verimliliğin 57,18% olduğunu göstermektedir. Sonuçlar sürdürülebilirliğin otel endüstrisinin verimliliğini olumlu yönde etkilediği sonucuna varıyor. Bu tezin sonuçları, otel endüstrisinin performansını ve sürdürülebilir kalkınmayı iyileştirmenin yolları hakkında bilgi vermektedir.
Anahtar Kelimeler: Malmquist verimlilik endeksi, Otel endüstrisi, Önyükleme, Sürdürülebilirlik, Tobit regresyon modeli, Verimlilik, VZA.Master of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2021-12-03T13:33:46Z2021-12-03T13:33:46Z20202020-01masterThesisEl Alaoui, Maryam Hachimi. (2020). An Evaluation of Efficiency, Productivity and Sustainability of the Hotel Industry in Tunisia using a Two-stage DEA method. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5250enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/51772021-11-09T00:01:25Zhdl_11129_13Efficiency Improvement with Target Setting Models in Data Envelopment Analysis: Theory and ApplicationsIbrahim, Mustapha DaruwanaIndustrial EngineeringRobust controlQuality Control SystemsData Envelopment AnalysisEfficiency improvementTarget settingMost Productive Scale SizePredefined inputsPredefined outputsData Envelopment Analysis (DEA) evaluates efficiency of homogeneous units using a frontier as an approximation for production function, to identify the efficient and inefficient units. Target setting offers strategic efficiency improvement for inefficient units, thus providing ex-ante efficiency improvement strategy. To that effect, two approaches for target setting are proposed. First approach uses the most productive scale size (MPSS) hyperplane vector to guide an inefficient unit to the efficiency frontier, consequently incorporating feasible productivity improvement and enhancing efficiency. The second approach has two folds which are based on decision makers‘ desire. One is based on predefined inputs, which uses decision makers‘ input capabilities to propose efficient output targets. The other is based on predefined outputs targets by the decision maker, where desired output are presented, and the required efficient inputs are proposed. Empirical analysis with real life applications are used to validate the proposed models.
Keywords: Data Envelopment Analysis, Efficiency improvement, Target setting, Most Productive Scale Size, Predefined inputs, Predefined outputs.ÖZ:
Veri Zarflama Analizi (VZA), etkin ve verimsiz birimleri tanımlamak için bir sınır kullanarak homojen birimlerin verimliliğini değerlendirir. Hedef belirleme, etkin olmayan birimler için stratejik verimlilik artışı sağlar, böylece ön stratejis sağlar. Bu amaçla, hedef belirleme için iki yaklaşım önerilmiştir. İlk yaklaşım, verimsiz bir üniteyi verimlilik sınırına yönlendirmek için en üretken ölçek boyutu (EÜÖB) hiperdüzlem vektörünü kullanır ve sonuç olarak uygun verimlilik iyileştirmesini ve verimliliği artırır. İkinci yaklaşım, karar vericilerin isteğine dayanan iki katlı yaklaşımdır. Biri, verimli çıktı hedefleri önermek için karar vericilerin girdi yeteneklerini kullanan önceden tanımlanmış girdilere dayanmaktadır. Diğeri, karar vericinin önceden tanımlanmış çıktı hedeflerine dayanır, istenen çıktılar sunulur ve gerekli verimli girdiler önerilir. Gerçek yaşam uygulamaları ile deneysel analizler, önerilen modelleri doğrulamak için kullanılır.
Anahtar Kelimeler: Veri Zarflama Analizi, Verimlilik Artışı, Hedef Belirleme, En Üretken Ölçek Büyüklüğü, Ön tanımlı girişler, Ön tanımlı çıkışlar.Doctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Assist. Prof. Dr. Sahand DaneshvarEastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2021-11-08T11:37:23Z2021-11-08T11:37:23Z20182018-07doctoralThesisIbrahim, Mustapha Daruwana. (2018). Efficiency Improvement with Target Setting Models in Data Envelopment Analysis: Theory and Applications. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5177enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/52782022-02-16T00:01:23Zhdl_11129_13Environmental Efficiency Evaluation Based on Waste Reduction for a Chemical Production Company: An Application of Data Envelopment AnalysisGwarzo, Bello TukurIndustrial EngineeringWaste minimization--Recycling (Waste, etc.)--Factory and trade wasteSource reduction (Waste management)Industrial productivity--MeasurementData Envelopment AnalysisEfficiency EvaluationEnvironmental HazardData envelopment analysis technique proposed by Charnes, Cooper and Rhodes in 1978, was used in this thesis in analyzing the efficiency of thirty two decision making units of the chemical production company, simple relation of output-to-input ratio couldn’t be used because of the several number of decision making units. The thesis focus on how to minimize the environmental hazard caused by industries without affecting the production capacity of the industries, the data was analyzed using CCR model as the methodology used which is one of data envelopment analysis technique. There were four Decision making units (DMU6 = June 2017, DMU7 = July 2017, DMU14 = February 2018 and DMU25= January 2018) found to be optimal which meant the minimal waste disposal found to be in the four decision making units, and such units were found to be the benchmarks for the rest of the DMUs in order to minimize waste disposal, and can also be the benchmarks to consider at DMUs in the future production process in minimizing the amount of waste disposes to the environment which would proportionally minimizes the effect of Climate change, and also minimizes energy consumption at industries. Each DMU used served as a month in a particular year.
Keywords: Data Envelopment Analysis, Efficiency Evaluation, Environmental HazardÖZ:
Veri Zarf Analizi, ilk defa 1978’de Charnes, Cooper ve Rhodes tarafından bir kimyasal firmanın 32 karar verme ünitesinde kullanılmıştır. Sade girdi çıktı ilişkisi kullanılmamıştı çünkü firmada birçok karar verme ünitesi mevcuttu.
Bu tezin amacı üretimi düşürmeden endüstrilerin yarattığı çevresel tehlikeleri en aza indirmektir Bu bilgiler Veri Zarf Analizini bir tekniği olan CCR model ile analiz edilmiştir Bu çalışmada 4 karar verme unitesi (DMU6 DMU 7 DMU 14 DMU 25) bulunmaktadır Bunlar atık imhası için en en uygun sonuçlardır. Aynı zamanda bu 4 unite gelecekteki atık imhası için enerji tüketimini azaltmak ve çevresel tehlikeleri minimize etmek için kıyaslama olarakta kullanılabilir.
Anahtar Kelimeler: Veri Topmlama Analizi, Verimlilik Değerlendirmesi, Çevresel TehlikeMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2022-02-15T08:25:12Z2022-02-15T08:25:12Z20202020-01masterThesisGwarzo, Bello Tukur. (2020). Environmental Efficiency Evaluation Based on Waste Reduction for a Chemical Production Company: An Application of Data Envelopment Analysis. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5278enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/54002022-04-22T23:01:28Zhdl_11129_13Assignment of Patients to Hospitals in a Case of a Large-Scale EarthquakePınarbaşı, AysunIndustrial EngineeringEmergency Services--Management--PlanningHumanitarian logisticsEarthquakeDisaster managementList schedulingHeuristic methodThe main topic of this thesis is the transportation of injured persons to the hospitals after a large-scale disaster. The main tool for solving the problem is machine scheduling. Machine scheduling in production planning activities of enterprises is a frequent activity in short-term planning and it is very important to use resources efficiently. The scheduling of identical parallel machines is adapted to the humanitarian logistics problem. List scheduling method is applied for makespan minimization. The results show comparisons of the shortest processing time (SPT) and longest processing time (LPT) rules to get the optimum sequence for the addressed problem by an algorithm. For the heuristic method; single vehicle, 2 vehicles and 3 vehicles cases are discussed.
First of all, both demographic and geographic information have provided about Istanbul. It is assumed that in a case of a large-scale earthquake in İstanbul, the city is divided into regions by Voronoi diagram. The strategy is to dispatch him/her to the closest hospital according to location of the victim. The objective function of the study is to maximize the number of seriously injured people in post-disaster period by a proper assignment of existing ambulances to patients and the expected value of service level at the same time. The service level increases as the expected travel distance of patients decreases having inverse relation.
Keywords: Humanitarian logistics, Earthquake, Disaster management, List scheduling, Heuristic method.ÖZ:
Bu tezin ana konusu, ağır yaralı kişilerin büyük çaplı bir felaketten sonra hastanelere ulaştırılmasıdır. Problemi çözmek için makine çizelgeleme yöntemi kullanılmıştır. İşletmelerde üretim planlama faaliyetleri için kullanılan makine çizelgeleme, kısa süreli planlamada sık uygulanmaktadır ve kaynakların verimli kullanımında büyük önem taşımaktadır. Özdeş makine çizelgeleme insani lojistik problemlerine uyarlanmıştır. Uygulanan Liste Çizelgeleme yöntemi yaralıların hastaneye taşınması için geçen toplam süreyi en aza indirmeyi amaçlamaktadır. Çalışmada, elde edilen sonuçlar, geliştirilen algoritma ile ele alınan problem için en uygun işlem sırasını elde etmede en kısa işlem süresi (SPT) ve en uzun işlem süresi (LPT) kurallarının karşılaştırmasını göstermektedir. Sezgisel yöntem için; tek araç, 2 araç ve 3 araç durumları incelenmiştir.
Öncelikle, İstanbul hakkında hem demografik hem de coğrafi bilgiler sağlanmıştır. İstanbul'da büyük çaplı bir deprem olması durumunda, kentin Voronoi diyagramı ile bölgelere ayrıldığı varsayılmaktadır. Strateji, depremzedenin bulunduğu yere göre onu en yakın hastaneye taşımaktır. Çalışmanın amaç fonksiyonu, afet sonrası dönemde mevcut ambulansların hastalara uygun şekilde atanması ile kurtarılan ağır yaralıların sayısını ve aynı zamanda beklenen hizmet seviyesini maksimize etmektir.
Anahtar kelimeler: İnsani lojistik, Deprem, Afet yönetimi, Liste çizelgeleme, Sezgisel yöntemMaster of Science in Industrial Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2019. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2022-04-22T11:17:05Z2022-04-22T11:17:05Z20192019-06masterThesisPınarbaşı, Aysun. (2019). Assignment of Patients to Hospitals in a Case of a Large-Scale Earthquake. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5400enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/53172022-03-12T00:01:17Zhdl_11129_13Application of Genetic Algorithm to Keyboard Arrangement ProblemOnsorodi, Amir Hossein HabibiIndustrial EngineeringHuman and ErgonomicsMachine Systems--ErgonomicsTablet ComputerDesignKeyboard designSystematic layout planningGenetic algorithmThe number of people who use computer for business purposes increases as technology grows. Application of ergonomics practices on computer workstations reduces musculoskeletal discomfort experienced and increased overall job satisfaction of the employees. Keyboards are available in various systems, computers to mobile devices, which have difference shapes and sizes. Keyboard size and shape is known to influence upper extremities. Alternative keyboard designs may prevent or reduce arm pain or disorders, and probably the mechanism is by reducing awkward arm postures. Previous researchers have put their effort on optimizing the character arrangement of the keyboard by taking into account the co-occurrence frequency of characters in words, typing ergonomics, and word disambiguation effectiveness. This research considers the frequency of appearance of the most used 3000 words in the English language. First, the text Analyzer calculates the frequency of each letter pair. Then, a genetic algorithm is applied to design an ergonomically optimized keyboard to minimize the total distance of finger travel among the selected alphanumeric characters. The results showed that the distance travelled obtained by the proposed keyboard layout is less than that for the QWERTY keyboard in all different types of texts, in which an average of 6.04% improvement was achieved. Therefore, the proposed design can be used for keyboards to reduce time and fatigue.
Keywords: Keyboard design, Systematic layout planning, Genetic algorithmÖZ:
Teknoloji ilerledikçe iş amaçlı bilgisayar kullananan kişilerinde sayısı da artmaktadır. Bilgisayarlı iş istasyonlarında uygulanan ergonomik tasarımlar, yaşanan kas-iskelet sistemi rahatsızlıklarını azaltmakta ve çalışanların genel iş memnuniyetini artırmaktadır. Farklı şekil ve boyutlara sahip bilgisayarlardan mobil cihazlara kadar çeşitli sistemlerde klavyeler mevcuttur. Klavye boyutu ve şeklinin üst ekstremiteleri etkilediği bilinmektedir. Alternatif klavye tasarımları kol ağrısını veya bozukluklarını önleyebilir veya azaltabilir, ayrıca bu tasarımlar uygunsuz kol duruşlarını azaltmaktır. Literatürde kelimelerdeki karakterlerin bir arada bulunma sıklığı, yazma ergonomisi ve kelime belirsizliğini giderme etkinliğini dikkate alarak klavyenin karakter düzenlemesini optimize etmek için çalışmalar mevcutturr. Bu araştırma, İngilizcede en çok kullanılan 3000 kelimenin görülme sıklığını ele almaktadır. İlk olarak, metin çözümleyici her bir harf çiftinin frekansını hesaplandı. Ardından, seçilen alfasayısal karakterler arasında parmak hareketinin toplam mesafesini en aza indirmek için ergonomik olarak optimize edilmiş bir klavye tasarlamak için genetik bir algoritma uygulandı. Sonuçlar önerilen klavye düzeniyle elde edilen mesafenin tüm farklı metin türlerinde QWERTY klavyeden daha az olduğunu ve ortalama% 6,04'lük bir iyileştirmenin elde edildiğini göstermektedir. Bu nedenle önerilen tasarım, klavyeler için zamanı ve yorgunluğu azaltmak için kullanılabilir.
Anahtar Kelimeler: Klavye tasarımı, Sistematik vaziyet planı, Genetik alogritmaDoctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Assoc. Prof. Dr. Orhan Korhan.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Korhan, Orhan2022-03-11T07:44:29Z2022-03-11T07:44:29Z20202020-05doctoralThesisOnsorodi, Amir Hossein Habibi. (2020). Application of Genetic Algorithm to Keyboard Arrangement Problem. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5317enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/54132022-04-25T23:01:24Zhdl_11129_13Performance Efficiency of a Chemical Company Using DEAIsied, Mahmoud A. MohammadIndustrial EngineeringIndustrial productivityUnsaturated Polyester Resin (UPR)Constant return to scaleInput oriented modelEfficiency evaluationData Envelopment Analysis (DEA)The chemical companies that produce unsaturated polyester resins generally suffer from the high cost in production. Most of them focus on quality control in order to avoid the cost of rework and increase performance assurance. Data Envelopment Analysis (DEA) models are used recently as one of the most powerful non-parametric methods to computing the efficiency of the multiple inputs and outputs of decision-making units (DMU’s). However, these models are sensitive about inputs and outputs selection, and a number of them against the number of DMUs. This paper uses Data Envelopment Analysis (DEA) models to find the efficiency performance of a chemical company in a certain period of time in a manner that maintenance, production and management cost are minimized taking into consideration environmental hazard and maximizing profit. Constant Return to Scale (CRS) models are used to verify the most significant factors that affect efficiency values in the company and forecasting the desired cost reduction in a future period of time. The results determined the efficient DMUs and contained the values needed for inefficient DMUs to reach optimum targets. Keywords: Unsaturated Polyester Resin (UPR), Constant return to scale, Input-oriented model, Efficiency evaluation, Data Envelopment Analysis (DEA).ÖZ: Doymamış polyester reçineleri üreten kimya şirketleri genellikle yüksek üretim maliyetinden muzdariptir. Çoğu, yeniden işleme maliyetinden kaçınmak ve performans güvencesini artırmak için kalite kontrolüne odaklanır. Veri Zarflama analizi (VZA) modelleri son zamanlarda karar verme birimlerinin (KVB'lar) çoklu giriş ve çıkışlarının verimliliğini hesaplamak için en güçlü parametrik olmayan yöntemlerden biri olarak kullanılmaktadır, ancak bu modeller girdi çıkh seçimi ve girdi çıkh sayısına karşı KVB sayısı konularında hossastır. Bu makale, bir kimyasal şirketin belirli bir dönemde verimlilik performansını çevre tehlikesi göz önünde bulundurularak ve karı en üst düzeye çıkararak bakım, üretim ve yönetim maliyetlerini en aza indirecek şekilde bulmak için Veri Zarflama Analizi (VZA) modellerini kullanmaktadır Sürekli Ölçeğe Dönüş (ÖSG) modelleri, şirketteki verimlilik değerlerini etkileyen en önemli faktörleri doğrulamak ve gelecek dönemde istenen maliyet düşüşünü tahmin etmek için kullanılır. Sonuçlar verimli KVB'ları belirledi ve verimsiz KVB'ların optimum hedeflere ulaşması için gereken değerleri içeriyordu. Anahtar Kelimeler: Doymamış Polyester Reçine (DPR), Ölçeğe sabit geri dönüş, Girdi odaklı model, Verimlilik değerlendirmesi, Veri Zarflama Analizi (VZA).Master of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2022-04-25T06:55:08Z2022-04-25T06:55:08Z20202020-08masterThesisIsied, Mahmoud A. Mohammad. (2020). Performance Efficiency of a Chemical Company Using DEA. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5413enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/53552022-04-21T23:01:10Zhdl_11129_13Cyclic Scheduling Problem of a Flexible Robotic Cell with a Self-Buffered RobotAl-Hindwan, Fatma Mohamed AliIndustrial EngineeringManufacturing processes--Flexible Manufacturing SystemsMechanization--factory operations engineeringComputer-aided manufactureFlexible Manufacturing SystemsCyclic Robotic FMS SchedulingSelf-Buffered RobotExtensive usage of automatic processing in industries has created Flexible Manufacturing Systems (FMSs). In a robotic FMS there are some Computer Numerical Control (CNC) machines for processing the parts, there is an input buffer for keeping unprocessed parts and an output buffer for finished parts, and at least one robot for transporting the parts in the system and loading/unloading the machines, and a central computer controlling the system. Such systems provide advantage in flexibility and standardization in production systems and they have been employed in recent years in order to keep up with the market competition. In order to use the system efficiently the system should be scheduled carefully. In this content, the order of the robot actions such as robot movements and loading/unloading activities should be determined for maximizing the system’s efficiency. When the system repeats a cycle in its run maximizing the efficiency is equivalent to minimizing the cycle time.
This thesis considers a robotic FMS in which there is a single self-buffered robot which has the ability to carry more than one part at a time in an inline robotic cell where parts produced are identical. The system repeats a cycle in its long run. The problem is to determine the schedule of the system for minimizing the cycle time. A Mixed Integer Programming (MIP) model of the problem is developed to find the optimal solutions. Since the developed MIP model could not solve the large size problems a Simulated Annealing meta-heuristic algorithm is developed to solve those problems. Performances of the proposed methods and considered robotic FMS cells are evaluated on several numerical instances. Numerically, it has been shown that the performances of the proposed methods are satisfactory and the performance
of the robotic FMS increases significantly by using a self-buffered robot up to some robot buffer capacity. After a point more robot buffer capacity becomes useless.
Keywords: Flexible Manufacturing Systems, Cyclic Robotic FMS Scheduling, Self-Buffered Robot.ÖZ:
Sanayide otomasyona dayalı üretimin geniş şekilde kullanımı Esnek Üretim Sistemleri’ni (EÜSleri’ni) ortaya çıkarmıştır. Robotlu bir EÜS’de parçaları işlemek için CNC makineler, işlenmemiş parçaları tutmak için bir stok alanı, bitmiş parçalar için bir stok alanı, parçaları sistemde taşımak ve makineleri yüklemek/boşaltmak için en az bir robot ve sistemi kontrol eden bir merkezi bilgisayar vardır. Böyle sistemler esneklik ve standartlaşma konularında avantaj sağlamaktadır ve son yıllarda rekabet edebilmek için tercih edilmektedirler. Sistemin verimli bir şekilde kullanılabilmesi için dikkatlice çizelgelenmesi gerekmektedir. Bu kapsamda, robot hareketi ve yükleme/boşaltma gibi robot faaliyetleri sistem verimliliğini en büyükleyecek şekilde belirlenmelidir. Sistem çalışırken bir döngüyü tekrarlıyor ise döngü süresinin en küçüklenmesi sistem verimliliğinin en büyüklenmesiyle aynıdır.
Bu tezde, birden fazla parçayı aynı anda taşıyabilecek kendi stok alanına sahip bir robotun bulunduğu ve parçaların özdeş olduğu bir robotlu EÜS ele alınmıştır. Sistem uzun süreli çalışmasında bir döngüyü tekrarlar. Problem, döngü süresini en küçükleyecek sistem çizelgesinin bulunmasıdır. En iyi çözümleri bulmak üzere problemin Karışık Tamsayılı Programlama (KTP) modeli geliştirilmiştir. Geliştirilen KTP modeli büyük boyutlu problemleri çözemediği için bu problemleri çözmek amacı ile Tavlama Benzetimi modern-sezgisel algoritması geliştirilmiştir. Geliştirilen yöntemlerin ve ele alınan EÜS hücresinin performansları çeşitli sayısal problemler üzerinden değerlendirilmiştir. Önerilen yöntemlerin memnun edici bir performansa sahip oldukları ve ele alınan robotlu EÜS’nin performansının kendi stok alanı olan robot kullanılarak belli bir stok kapasitesine kadar önemli derecede arttığı sayısal
olarak gösterilmiştir. Belli bir noktadan sonra daha fazla robot stok alanının olması faydasızdır.
Anahtar Kelimeler: Esnek Üretim Sistemleri, Döngülü Robotlu EÜS Çizelgeleme, Kendinden Stok Alanlı Robot.Master of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Assist. Prof. Dr. Hüseyin Güden.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Güden, Hüseyin2022-04-21T04:59:41Z2022-04-21T04:59:41Z20182018-07masterThesisAl-Hindwan, Fatma Mohamed Ali. (2018). Cyclic Scheduling Problem of a Flexible Robotic Cell with a Self-Buffered Robot. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5355enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/55152022-05-16T23:01:21Zhdl_11129_13Quality in Engineering Based on FeedbackEbrahim, Mohammad AleIndustrial EngineeringClaims (Customer relations)--Quality Management--Marketing managementComplaints (Customer relations)--Marketing ManagementConsumer Complaints--Marketing ManagementConsumer Satisfaction--Customer Relations--Marketing ManagementCustomer Relations--Marketing ManagementCustomer services--EvaluationQualitywindow lifterIKCOquestionnaire formsaction planside effectsproject teamfeedbackfeasibility studyingQuality in production these days is a very important subject for all manufactures. Several researches mention customer’s dissatisfaction with quality of products they buy. Quality experts concentrate on the relations between quality and products, for example the relation between quality and price, between quality and market share, generally speaking, quality improvement projects may lead to higher or lower total profits?. This study has two main chapters; first chapter shows a project about quality problem for window lifter part of car in IKCO (Iran Khodro Company) which explains what are the steps for solving a quality problem in a specified factory (car producer factory) based on feedback. Following chapters explain a structure of quality improvement process that can be used for any kind of quality improvement project. It also deals with quality problem in any kind of factory. Keywords: Quality, window lifter, IKCO, questionnaire forms, action plan, side effects, project team, feedback, feasibility studyingÖZ: Günümüzde kalite tüm üreticiler için önemli bir konudur. Sadece bazı araştırmalar, müşterilerin satın almış olduğu ürünlerdeki kalite memnuniyetsizliği konusunu ele almaktadır. Kalite uzmanlarının odaklanmış olduğu kalite ve ürün arasındaki ilişkilere örnek olarak; kalite ve fiyat, kalite ve ürünün piyasadaki payı sayılabilir fakat genel anlamda kalite artırımı projelerinin toplam karı artıracağına mı ya da azaltağına mı yoğunlaşmaktadır. Bu çalışma iki bölümden oluşmaktadır; ilk bölümde çalışma İKCO(İran Khodro Şirketi)’nun araç pencere kaldıraçlarındaki kalite problemlerinin çözümünde araç üretici firmaları tarafından kullanılan geri bildirim temelli kalite geliştirme adımlarını içeren bir projeyi açıklamaktadır. İlerleyen bölümlerde kalite geliştirme projelerinde kullanılabilecek, kalite geliştirme süreçleri yapılarından ve her üretim tesisinde karşılaşılabilecek kalite problemlerinden bahsedilmektedir. Anahatar kelimeler: Kalite, pencere kaldıracı, İKCO, anket formları, eylem planı, yan etkiler, proje takımı, geri bildirim, makuliyet araştırmaları.Master of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2018. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2022-05-16T08:21:10Z2022-05-16T08:21:10Z20182018-09masterThesisEbrahim, Mohammad Ale. (2018). Quality in Engineering Based on Feedback. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5515enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/55582022-07-27T23:01:09Zhdl_11129_13Comparative and Systematic Analysis of Disaster Management SystemShakeri, EhsanIndustrial Engineering DepartmentDisaster Management - IndiaDisaster TechnologyIndian Disaster Management, Nigerian Disaster Management, Man-Made Disaster Management, Natural Disaster Management, Disaster Risk ReductionABSTRACT: This study reviews, compares, and analyzes the legislative and institutional frameworks of the Disaster Management (DM) in Nigeria and India. This research aims to study the effectiveness and efficacy of the DM systems in both countries to identify the strengths and weaknesses and make recommendations for enhancing the current systems. The study initially provides a comprehensive introduction of Indian and Nigerian DM systems, including the countries’ disaster profiles and the current DM policies and institutional frameworks, then compares them from various perspectives to identify the similarities, differences, common challenges, and lessons learned. An intense documentary survey of relevant literature is applied in this study to obtain data and information. The study finds that India, by developing better legal and institutional frameworks, creates a more effective DM system than Nigeria in terms of the integration and prioritization of Disaster Risk Reduction (DRR) activities, community participation, and coordination and collaboration mechanisms. The research also discovers that both nations struggle to mobilize, manage, and utilize DM funds due to a lack of transparency in funding sources. The findings also show that both countries’ DM systems are mainly focused on natural disasters, with little emphasis provided on effective preventative and regulatory measures to handle man-made disasters. The study concludes that due to administrative and financial issues, none of the two countries achieved total success in capacity building activities. Keywords: Indian Disaster Management, Nigerian Disaster Management, Man-Made Disaster Management, Natural Disaster Management, Disaster Risk Reduction.Doctor of Philosophy in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (Ph.D.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2022. Supervisor: Prof. Dr. Bela Vizvari.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Vizvari, Bela2022-07-27T10:15:52Z2022-07-27T10:15:52Z2022-012022-01doctoralThesisShakeri, Ehsan. (2022). Comparative and Systematic Analysis of Disaster Management System. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Indusstrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5558enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/55772023-04-14T23:01:16Zhdl_11129_13Performance Efficiency Evaluation of European Countries Healthcare Systems during the Pandemic (Covid-19) Using the Data Envelopment AnalysisOpatokun, Ismail OluwaseyiIndustrial EngineeringPerformance Efficiency Evaluation-Healthcare Systems-HEalth Sector-Hospitals-EuropeCovid-19 Pandemic-Health System-EuropeData Envelopment AnalysisDEACCREuropeanCountriesHealthcareEfficiencyGross Domestic ProductTotal PopulationCovid-19TestsIn this paper, a non-parametric method known as Data Envelopment Analysis was used
to analyse the efficiency of the healthcare systems of 48 European countries in
managing the covid-19 pandemic. Using the constant returns to scale model of
Charnes, Cooper and Rhodes (CCR) on input and output variables like total
population, total covid-19 cases, total tests performed, total recoveries etc, the results
showed that only 10 out of the 48 countries were optimally efficient in their
management of the pandemic with some of the richest countries like France and
Belgium being some of the poorest performers. Minimally developed countries like
the Czech Republic, Andorra and Moldova were some of the best performers with
Moldova being the most referenced optimal country in the benchmark test. It was
shown that the inefficient countries like France and Belgium had to reduce the number
of cases via distancing and lockdown measures to improve efficiency. The same goes
for minimally efficient countries like the United Kingdom.
The results finally indicate that developmental indices like gross domestic product
(GDP) had an insignificant impact on the efficiency of countries in managing the
pandemic as very rich countries were poor performers, although their high populations
likely skewed the efficiency ratios in comparison to high performing countries with
low populations.
Keywords: Data Envelopment Analysis, DEA, CCR, European, Countries,
Healthcare, Efficiency, Gross Domestic Product, Total Population, Covid-19, TestsÖZ:
Bu makalede, Veri Zarflama Analizi olarak bilinen parametrik olmayan bir yöntem,
covid-19 pandemisini yönetmede 48 Avrupa ülkesinin sağlık sistemlerinin etkinliğini
analiz etmek için kullanılmıştır. Charnes, Cooper ve Rhodes'un (CCR) ölçek modeline
göre sabit getiri modelini toplam nüfus, toplam covid-19 vakaları, gerçekleştirilen
toplam testler, toplam geri kazanımlar gibi girdi ve çıktı değişkenleri üzerinde
kullanarak, sonuçlar 48 ülkeden yalnızca 10'unun Fransa ve Belçika gibi en zengin
ülkelerden bazıları en fakir performans gösteren ülkelerden bazıları ile pandemiyi
idare etmede en iyi şekilde etkiliydi. Çek Cumhuriyeti, Andorra ve Moldova gibi
minimal gelişmiş ülkeler, kıyaslama testinde en çok başvurulan optimal ülke olan
Moldova ile en iyi performans gösteren ülkelerden bazılarıydı. Fransa ve Belçika gibi
verimsiz ülkelerin verimliliği artırmak için mesafe ve tecrit tedbirleri yoluyla vaka
sayısını azaltmak zorunda kaldığı gösterildi. Aynı durum Birleşik Krallık gibi
minimum düzeyde verimli ülkeler için de geçerli.
Son olarak sonuçlar, gayri safi yurtiçi hasıla (GSYİH) gibi kalkınma endekslerinin,
çok zengin ülkeler zayıf performans gösterenler olduğu için, ülkelerin pandemiyi
yönetmedeki verimliliği üzerinde önemsiz bir etkiye sahip olduğunu göstermektedir.
Anahtar Kelimeler: Veri Zarflama Analizi DEA), CCR, Avrupa, Ülkeler, Sağlık
Hizmetleri, Verimlilik, Gayri Safi Yurtiçi Hasıla, Toplam Nüfus, Covid-19, Pandemi,
TestlerMaster of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2021. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2023-04-14T08:53:44Z2023-04-14T08:53:44Z2021-022021masterThesisOpatokun, Ismail Oluwaseyi. (2021).Performance Efficiency Evaluation of European Countries Healthcare Systems during the Pandemic (Covid-19) Using the Data Envelopment Analysis . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5577enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/56602023-04-27T23:01:20Zhdl_11129_13Applying Data Envelopment Analysis to Improve Performance of Emergency Departments in Iranian Hospital: A Case StudyJelodar, MiladIndustrial productivity-Health Sector-Hospitals-IranCardiopulmonary Resuscitation as CPRCCR ModeData Envelopment Analysis as DEAEmergency DepartmentIndustrial EngineeringOne of the most important parts of the health system in each society is hospitals. It should not be forgotten that the emergency room of a hospital is the first point of entry for patients and their companions with the medical system, and one of the problems that often affect the performance of the emergency department is the length of time patients wait in the emergency room. This dissertation has been conducted with the aim of reducing the average waiting time of patients in the emergency department, improving the efficiency of nurses, and increasing the performance of the emergency department. The case study was “Razi Hospital” located in Ahwaz, Iran. It is a general hospital wich at present, with an area of 7,971 square meters, medical services including general surgery, orthopedics 1 and 2, internal medicine, infectious diseases, obstetrics, neonatology, CCU, ICU, emergency department, operating room, physiotherapy, radiology, laboratory, dialysis, echocardiography and specialized clinics visit patients.
The data were prepared from the emergency department of the hospital for 12 months in 2018, 2019, and 2020. Data analysis obtained in this study is performed using PIM-DEA software based on the CCR model as a method that is one of the techniques of data envelopment analysis. According to the results, the most important priority is the number of patients with CPR procedures. With this in mind, we can focus on accepting patients with CPR in order to increase the level of emergency function. The next most important factor is the average time the patient leaves the hospital. According to the hospital experts, the time of the patient's discharge from the hospital is a very important indicator, because according to the capacity of the hospital and the number of staff, the lower the average time of the patient's discharge from the emergency room, the better
iv
the emergency performance.
Keywords: Cardiopulmonary Resuscitation as CPR, CCR Model, Data Envelopment Analysis as DEA, Emergency DepartmentÖz: Her toplumda sağlık sisteminin en önemli parçalarından biri hastanelerdir. Unutulmamalıdır ki, bir hastanenin acil odası, hastalar ve refakatçileri için tıbbi sisteme ilk giriş noktasıdır ve acil servisin performansını sıklıkla etkileyen sorunlardan biri de hastaların bekleme sürelerinin uzunluğudur. acil servis. Bu tez, acil serviste hastaların ortalama bekleme sürelerinin kısaltılması, hemşirelerin verimliliğinin artırılması ve acil servisin performansının artırılması amacıyla yapılmıştır. Örnek olay İran'ın Ahvaz kentinde bulunan "Razi Hastanesi" idi. Şu anda 7,971 metrekare alana sahip, genel cerrahi, ortopedi 1 ve 2 dahil tıbbi hizmetler, dahiliye, enfeksiyon hastalıkları, obstetrik, neonatoloji, CCU, YBÜ, acil servis, ameliyathane, fizyoterapi, radyoloji, laboratuvar, diyaliz, ekokardiyografi ve özel klinikler hastaları ziyaret eder.
Veriler 2018, 2019 ve 2020 yıllarında hastanenin acil servisinden 12 ay süreyle hazırlanmıştır. Bu çalışmada elde edilen veri analizi, aşağıdaki tekniklerden biri olan CCR modeline dayalı olarak PIM-DEA yazılımı kullanılarak yapılmıştır. veri zarflama analizi. Sonuçlara göre en önemli öncelik CPR işlemi uygulanan hasta sayısıdır. Bunu akılda tutarak, acil durum işlevinin seviyesini artırmak için CPR'li hastaları kabul etmeye odaklanabiliriz. Bir sonraki en önemli faktör, hastanın hastaneden ortalama ayrılma süresidir. Hastane uzmanlarına göre hastanın hastaneden taburcu süresi çok önemli bir göstergedir çünkü hastanenin kapasitesi ve personel sayısına göre hastanın acil servisten ortalama taburcu olma süresi ne kadar düşükse acil durum performansını iyileştirir.
Anahtar Kelimeler: CPR Olarak Kardiyopulmoner Resüsitasyon, CCR Modeli, DEA olarak Veri Zarflama Analizi, Acil ServisMaster of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2021. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2023-04-27T07:48:31Z2023-04-27T07:48:31Z2021-012021masterThesisJelodar, Milad . (2021). Applying Data Envelopment Analysis to Improve Performance of Emergency Departments in Iranian Hospital:A Case Study. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprushttp://hdl.handle.net/11129/5660enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/55992023-04-19T23:01:16Zhdl_11129_13Modification of Variable Returns to Scale Stochastic Data Envelopment Analysis (DEA) ModelsForghani, Seyed DavoodData envelopment analysisOperations researchOperations research-management decision makingData Envelopment Analysis (DEA)Stochastic Data Envelopment Analysis (SDEA)Modified ModelWeak Efficient FrontierData Envelopment Analysis (DEA) was introduced under the name of a deterministic
model assuming all the deviations from the estimated production frontier were one sided indicating technical inefficiency. Biased estimations of inefficiency and
production are provided by the model when deviations do not originate only from
inefficiency but also from measurement errors. In 1988, Banker developed Data
Envelopment Analysis as a stochastic model to reflect inefficiency and statistical noise
simultaneously. However, from deterministic to stochastic, the problem with weak
efficient frontiers and related biased results stayed the same.
This dissertation proposes a modification over Banker’s stochastic DEA (SDEA)
model by applying a limitation on the coefficients of inputs in the original model in
order to change weak efficient hyperplane(s) while keeps general assumptions behind
production function unaffected. This can change the production possibility set (PPS)
while the frontier has the potential to give a better representation of the true production
frontier. Comparing the results from the stochastic model and suggested modified
model shows that the achieved model is providing a new benchmark for relative
efficiency evaluation and production frontier estimation.
Keywords: Data Envelopment Analysis (DEA), Stochastic Data Envelopment
Analysis (SDEA), Modified Model, Weak Efficient Frontier.ÖZ: Veri Zarflama Analizi (VZA), tahmin edilen üretim sınırından tüm sapmaların teknik
verimsizliği gösteren tek taraflı olduğu varsayılarak deterministik bir model adı altında
tanıtıldı. Sapmaların yalnızca verimsizlikten değil aynı zamanda ölçüm hatalarından
da kaynaklandığında, model tarafından sapmaların verimsizlik ve üretim tahminleri
sağlanır. 1988'de Banker, verimsizliği ve istatistiksel gürültüyü eş zamanlı yansıtmak
için stokastik bir model olarak Veri Zarflama Analizini geliştirdi. Bununla birlikte,
deterministikten stokastiklere Zayıf verimli sınırlar ve ilgili önyargılı sonuçlar ile ilgili
sorun aynı kaldı.
Bu tez, Banker'in stokastik DEA (SDEA) modeli üzerinde, zayıf etkin hiper düzlem
(ler) i değiştirmek için orijinal modeldeki girdi katsayılarına bir sınırlama uygulayarak,
üretim fonksiyonunun arkasındaki genel varsayımları etkilenmeden koruyarak bir
değişiklik önermektedir. Bu, üretim olasılık kümesini (PPS) değiştirebilirken, sınır,
gerçek üretim sınırının daha iyi bir temsilini verme potansiyeline sahiptir. Stokastik
model ve önerilen modifiye modelden elde edilen sonuçların karşılaştırılması, elde
edilen modelin göreceli verimlilik değerlendirmesi ve üretim sınırı tahmini için yeni
bir kriter sağladığını göstermektedir.
Anahtar Kelimeler: Veri Zarflama Analizi (VZA), Stokastik Veri Zarflama Analizi
(SDEA), Değiştirilmiş Model, Zayıf Verimli sınır.Master of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2021. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Doğu Akdeniz ÜniversitesiDaneshvar, Sahand2023-04-19T05:50:07Z2023-04-19T05:50:07Z2021-022021masterThesisForghani, Davood Seyed. (2021). Modification of Variable Returns to Scale Stochastic Data Envelopment Analysis (DEA) Models. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5599enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/56272023-04-24T23:01:08Zhdl_11129_13A Real Life Feasibility Analysis in a Delivery Service SystemAzimi, SafaIndustrial EngineeringDelivery processes--Online FoodElectronic Commerce--Online Food DeliveryElectronic commerce--marketing managementInternet Marketing--ManagementFeasibility analysisDistributionOnline food deliveryEconomic analysisMixed-integer programmingOnline food ordering is an emerging field in recent years in the restaurant industry.
The availability of this platform provides customers with convenient food shopping
and restaurants with increased productivity and order accuracy. Feed Me Cyprus
(FMC) is an online food ordering application, that has been in progress since the
beginning, now it is considering to start the delivery service by itself. For this purpose,
the feasibility of establishing the own distribution network for a real-life service
system which is FMC was analyzed in this research. Two strategies have been
developed, one with considering the restaurants separately and the other with grouping
restaurants according to their locations. All related data and information are obtained
from several resources and the problem was formulated as a mixed-integer
programming model. The developed model was used to find the expected annual profit
of FMC for all alternative scenarios. Both of the strategies, by trying different service
prices: 6, 7,…,10 Turkish lira (TL) and delivery units were profitable. The second
strategy is developed to increase the utilization of the delivery units and the expected
profit of FMC by combining restaurants in groups based on their locations. By
applying a comparison between the results of the two strategies, the second one was
more profitable. In this way, some useful information and guiding comments for FMC
are obtained by implementing several economic analyses based on the found numerical
results of the second strategy. Except for some cases in price 6 TL, the results for the
rest of the prices in economic analyses were acceptable based on their net profit and
payback period.
Keywords: Feasibility analysis, Distribution, Online food delivery, Economic
analysis, Mixed-integer programmingÖZ:
İnternet üzerinden yemek siparişi vermek son yıllarda restorant sektöründe gelişen bir
alandır. Bu platformun kullanılabilirliği, müşterilere olan uygun yiyecek alışverişi ve
restoranlara daha fazla üretkenlik ve sipariş doğruluğu sağlar. Feed Me Cyprus (FMC)
şirketi de bunlardan biridir. Kurulduğundan beri restorantlara internet üzerinden
sipariş verme hizmeti sağlayan bu şirket son zamanlarda kendi dağıtım ekibini
oluşturarak siparişlerin müşterilere dağıtımını da kendisi yapmayı planlamaktadır. Bu
amaçla, FMC olan gerçek bir hizmet sistemi için kendi dağıtım ağını kurmanın
olabilirliğiyle bu araştırmada analiz edilmiştir. Bu kapsamda birinde restorantların ayrı
ayrı düşünüldüğü diğerinde gruplar halinde konumlarına göre düşünüldüğü iki strateji
ele alınmıştır. İhtiyaç duyulan veri ve bilgiler çeşitli kaynaklardan elde edilmiş ve
problem bir karma tamsayılı programlama modeli olarak formülize edilmiştir.
Geliştirilen model kullanılarak ele alınan tüm senaryolar için FMC şirketinin olabilir
yıllık karı bulunmuştur. Her iki strateji de farklı hizmet fiyatlarını: 6, 7,…, 10 Türk
lirası (TL) ve teslimat birimleri deneyerek karlıydı. İkinci strateji dağıtım birimlerinin
kullanım oranlarını ve FMC şirketinin olabilir karını artırmak üzere geliştirilmiştir. İki
stratejinin sonuçları arasında bir karşılaştırma uygulayarak, ikincisi daha karlı
olduğunu fark ettik. Bu şekilde, ikinci stratejinin bulunan sayısal sonuçlarına dayalı
çeşitli ekonomik analizler yapılarak FMC şirketi için bazı yararlı bilgiler ve yol
gösterici çıkarımlarda bulunulmuştur. 6 TL fiyatındaki bazı durumlar dışında,
ekonomik analizlerde kalan fiyatların sonuçları net kar ve geri ödeme sürelerine göre
kabul edilebilirdi.
Anahtar Kelimeler: Olabilirlik analizi, Dağıtım, Çevrimiçi yemek teslimatı, Finansal
analiz, Karma tamsayılı programlamaMaster of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2021. Supervisor: Assoc. Prof. Dr. Hüseyin Güden.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Güden, Hüseyin2023-04-24T06:18:34Z2023-04-24T06:18:34Z2021-022021masterThesisAzimi, Safa. (2018). A Real Life Feasibility Analysis in a Delivery Service System. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5627enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/57202023-08-14T23:01:16Zhdl_11129_13Fuzzy FMEA Risk Analysis on Chemical IndustryFenerci, Aslı HavvaGreen Engineering-Environmental AspectsSustainable developmentGreen chemistryIndustrial ChemistryGreen technology (Environmental technology)FMEAAHPRisk AssignmentRisk Priority NumberFuzzy FMEAgreen engineeringNowadays, green engineering strategies have become important for the industries, so
global warming and landslides are a sign that nature is disturbed, the sustainability of
green engineering and to leave a better environment for the future generation we
need to show importance to the consumption of natural resources.
There are different methods in production to protect green engineering and
environmental resources.These techniques vary depending on the production or
service sector and their application areas.Some of these techniques are
Environmental Failure Mode and Effect Analysis (EFMEA) and Process Failure
Mode and Effect Analysis (PFMEA). These two tools were used to evaluate Risk
Priority (RPN) numbers for prioritizing the risk assignment in a chemical factory in
the concept of green engineering. The identified components are calculated in the
multi-criteria decision making (MCDM). This technique identifies RPN numbers and
combines the weighting factor to the fuzzy parameter by the help of AHP. The
effectiveness of this method is explained in fuzzy parameters of AHP and indicated
with numerical example in a case study. In this study, the experts have evaluated
fuzzy AHP.
Keywords: FMEA, AHP, Risk Assignment, Risk Priority Number,Fuzzy
FMEA,green engineering.ÖZ:Günümüzde yeşil mühendislik stratejileri endüstriler için önem kazanmıştır. Küresel
ısınma ve toprak kaymaları doğanın rahatsız edildiğinin göstergesidir. Gelecek nesile
daha iyi bir ortam bırakmak için doğal kaynakların tüketimine önem vermemiz
gerekir.
Bu nedenle bu calışmada yeşil mühendisliğin sürdürebilirliği için iki araç
kullanılmıştır.Bunlar EFMEA ve PFMEA dır. Bu iki araç RPN sayısını
değerlendirmek için kimyasal fabrikada risk derecelendirmesinde
kullanıldı.Tanımlanan bileşenler çok kriterli karar vermede (MCDM) hesaplanır ve
bu teknik RPN numaralarını tanımlar ve AHP nin yardımıyla ağırlıklandırma
faktörünü bulanık parametreye birleştirir.Bu yöntemin etkinliği AHP nin bulanık
parametrelerinde acıklanır ve bir vaka calışmasında sayısal örneklerle gösterilir.
Bu vaka calismasinda klasik ve bulanık FMEA arasında karşılaştırma yapıldı ve bu
ankete katılan uzmanlara göre risk faktörleri geliştirildi.
Anahtar Kelimeler: FMEA, AHP, Risk Ataması, Risk Öncelik Numarası, Bulanık
FMEA, yesil mühendislik.Master of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Asst. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand2023-08-14T11:01:01Z2023-08-14T11:01:01Z2020-012020masterThesisFenerci, Aslı Havva. (2020). Fuzzy FMEA Risk Analysis on Chemical Industry . Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5720enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/57562023-09-26T23:01:11Zhdl_11129_13Students Skills Assessment with the Purpose to Increase their Employment PossibilitiesDlhin, Faeza SalehIndustrial EngineeringStudents--Employability SkillsSuccess in obtaining jobs and promotionsPromotion (Personnel)--personal successAptitudeEAS-cognitive testsstudent’s percentileengineeringrententability-thresholdbattery scoreattitudescurriculumemployability skillsperformance skillstrainingIncorporation of employability skills in the industrial engineering curriculum to bridge
the gap between industry and institutions of higher education has become a major
issue. This study seeks to asses both employability skills and retentability threshold of
the industrial engineering students. The employability skills were assessed based on
the skills that require training, skills that are needed for job performance and skills that
are received and emphasized in the industrial engineering curriculum. Two batches of
questionnaires are administered to the participants of the study. The first batch is
administered online to students, employed alumni and faculty members. The second
batch is distributed to instructors of industrial engineering core courses. Seven cogent
employability skills of the thirty-six employability skills items that were previously
reported are employed in the evaluation. Of the seven employability skills, following
management, leadership and information technology skills are identified as skills that
require additional training. The responses toward skills required for job performance
and skills that are received/emphasized in the curriculum are ranked higher by
participants based on the percentage of agreement. This study advocated that the
perception of participants provides greater insight into the skills items that should be
emphasized in the industrial engineering curriculum to enhance the employability of
graduates. On the another hand, employability aptitude survey cognitive test is
proposed to assess the retentability threshold of the students with the view of
appraising the capabilities of engineering students in readiness for engineering
positions. Numerical ability, space visualization, numerical reasoning, and symbolic
reasoning responses are adapted into the model. 106 undergraduate students of the
Department of Industrial Engineering at Eastern Mediterranean University selected
across freshman, sophomore, junior and senior in the 2016-2017 academic years
assessed their aptitudes through the proposed EAS cognitive tests. Analysis of variance
is employed to analyze the model and the results indicate that there is a significant
difference between students’ abilities in terms of raw scores and respective academic
levels. Academic years and CGPA groups are found to have significant effects on the
student’s percentile. Additionally, strong correlations between CGPA and the
student’s percentile are found. However, space visualization ability is not affected by
academic progression.
Keywords: aptitude, EAS-cognitive tests, student’s percentile, engineering,
rententability-threshold, battery score, attitudes, curriculum; employability skills,
performance skills, trainingÖZ:
Endüstri ve yüksek öğretim kurumları arasındaki boşluğu kapatabilmek adına endüstri
mühendisliği müfredatına istihdam edilebilirlik becerilerinin dahil edilmesi
günümüzde önemli bir konu haline gelmiştir. Bu nedenle bu çalışma, endüstri
mühendisliği öğrencilerinin hem istihdam edilebilirlik becerilerini hem de kalıcılık
eşiğini değerlendirmeyi amaçlamaktadır. Bu çalışmada istihdam edilebilirlik
becerileri, eğitim gerektiren beceriler, iş performansı için gerekli beceriler ve endüstri
mühendisliği müfredatında kazanılan/vurgulanan becerilere göre değerlendirilmiştir.
Bu bağlamda çalışmanın katılımcılarına iki grup anket uygulanmıştır. İlk grup anket
öğrencilere, çalışan mezunlara ve öğretim üyelerine çevrimiçi olarak uygulanırken;
ikinci grup anket ise, endüstri mühendisliği temel derslerinin eğitmenlerine
uygulanmıştır. Daha önce rapor edilen otuz altı istihdam edilebilirlik becerisi
maddesinin yedi ikna edici istihdam edilebilirlik becerisi bu değerlendirme
anketlerinde kullanılmıştır. Yedi istihdam edilebilirlik becerisinden yönetim, liderlik
ve bilgi teknolojisi becerileri ek eğitim gerektiren beceriler olarak tanımlanmaktadır.
Müfredatta kazanılan/vurgulanan iş performansı için gerekli becerilere ve bu
becerilere yönelik tepkiler katılımcılar tarafından ortak bir görüş ile daha üst sırada yer
almaktadır. Tüm bunlar ışığında bu çalışma, katılımcıların algısı, mezunların istihdam
edilebilirliğini artırmak için endüstri mühendisliği müfredatında vurgulanması
gereken beceri öğelerine daha fazla iç görü sağladığını savunmaktadır. Öte yandan,
istihdam edilebilirlik yetenek anketi, bilişsel test, mühendislik pozisyonlarına hazır
durumdaki mühendislik öğrencilerinin yeteneklerini değerlendirmek amacıyla
öğrencilerin kalıcılık eşiğini değerlendirmek için önerilmiştir. Sayısal yetenek, uzay
görselleştirme, sayısal muhakeme ve sembolik muhakeme tepkileri de bu modele
uyarlanmıştır. Doğu Akdeniz Üniversitesi, Endüstri Mühendisliği Bölümü'nden 2016-
2017 akademik yıllarında birinci, ikinci, üçüncü ve son sınıftan seçilen 106 lisans
öğrencisi, önerilen EAS bilişsel testler aracılığıyla yeteneklerini değerlendirmişlerdir.
Modeli analiz edebilmek adına Varyans analiz yöntemi kullanılmış ve sonuçlar
öğrencilerin ham puanlar ve ilgili akademik seviyeler açısından yetenekleri arasında
önemli bir fark olduğunu göstermiştir. Bu araştırmanın sonuçlarına bakılarak,
akademik yıllar ve CGPA (genel not ortalaması) öğrencinin yüzdelik oranında önemli
etkileri olduğu bulunmuştur. Ayrıca, genel not ortalaması ve öğrencinin yüzdelik oranı
arasında kuvvetli korelasyon gözlemlenmiştir. Ancak, uzay görselleştirme yeteneği
akademik ilerlemeden etkilenmemiştir.
Anahtar Kelimeler: yetenek, EAS-bilişsel testler, öğrenci yüzdesi, mühendislik,
kiralanabilirlik eşiği, pil puanı, tutumlar, müfredat; istihdam edilebilirlik becerileri,
performans becerileri, eğitimDoctor of Philosophy in Industrial Engineering. Thesis (Ph.D.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2021. Supervisor: Assoc. Prof. Dr. Adham A. Makkie.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Makkie, Adham A.2023-09-26T09:24:22Z2023-09-26T09:24:22Z2021-022021doctoralThesisDlhin, Faeza Saleh. (2021). Students Skills Assessment with the Purpose to Increase their Employment Possibilities. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5756enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/57642023-09-26T23:01:19Zhdl_11129_13Increasing the Performance Efficiency of Bread Bakery Company Using Data Envelopment Analysis (DEA)Aliyu, Aliyu MadakiIndustrial EngineeringIndustrial productivity--Bakery CompanyBakery CompanyData Envelope Analysis (DEA)CCR Input Oriented ModelThe market competition of bakeries in recent years have undergone rapid and
massive growth, because of this fast growth and change, this necessitate the need for
comprehending the performance relative efficiency as well as efficiency fluctuation
and changes of the bakeries. Nowadays, food industries and bakery companies tends
to use their current available production resources in an inefficient manner, as such,
managing and sustaining the development of the bakery regarding how well it is
performing when it comes to the production process is very important. Thus, ten
inputs and two outputs of a bakery company were considered as the DMUs. The
efficiency of inputs such as flour, salt, sugar, butter, yeast, water, electricity
consumption, etc., and outputs (bread and flour waste), involved in the production
process of a well-known bakery (Tahir B-bakery) from 2016 to 2018 was
quantitatively analyzed and evaluated by adopting one of the most well-known,
simple and suitable non- parametric effective technique (DEA) via using the CCR
input oriented model. Based on the model used, the overall efficiency of the
company in those past three years of Tahir B-bakery with regards to the use of input
resources for achieving output was tested, it was found the company’s performance
is relatively efficient with an average efficiency score of 92.6. The most efficient
months being June and July in both 2016 and 2017 respectively, although there is a
slightly decrease of efficiency as the years gone by, especially in the month of June
and July in 2018 plus the fact that the aim of any firm is to reach maximum level of
efficiency when it comes to utilizing the inputs and outputs production resources, as
well as other resources involved. Lastly, given the fact that there is a tendency the
performance efficiency to drop more as the year’s progress, they can follow the
recommended ways for improving their total efficiency, sustain it and avoid further
decrease of efficiency for their future productions to come.
Keywords: Bakery Company; Data Envelope Analysis (DEA); CCR Input Oriented
ModelÖZ:
Fırınların son yıllarda pazardaki rekabeti hızlı ve büyük bir büyüme yaşamıştır, bu
hızlı büyüme ve değişim nedeniyle, bu, performansın göreli verimliliğinin yanı sıra
verimlilik dalgalanmasının ve fırınların değişimlerinin anlaşılması gereğini
gerektirmektedir. Günümüzde, gıda endüstrileri ve fırın şirketleri mevcut mevcut
üretim kaynaklarını verimsiz bir şekilde kullanma eğilimindedir, bu nedenle fırının
üretim süreci söz konusu olduğunda ne kadar iyi performans gösterdiğine ilişkin
gelişimini yönetmek ve sürdürmek çok önemlidir. Böylece, bir fırın şirketinin on
girişi ve iki çıkışı DMU olarak kabul edildi. Un, tuz, şeker, tereyağı, maya, su,
elektrik tüketimi, vb. Gibi girdilerin ve iyi bilinen bir fırının (Tahir B-fırın) üretim
sürecinde yer alan çıktıların (ekmek ve un atığı) verimliliği 2016'dan 2018'e kadar,
CCR girdi odaklı model kullanılarak en iyi bilinen, basit ve uygun parametrik
olmayan etkili tekniklerden (DEA) biri kullanılarak nicel olarak analiz edilmiş ve
değerlendirilmiştir. Kullanılan modele dayanarak, Tahir B-fırınının son üç yılda çıktı
elde etmek için girdi kaynaklarının kullanımına ilişkin genel etkinliği test edilmiş,
şirketin performansının ortalama verimlilik puanı ile nispeten verimli olduğu
bulunmuştur. 92.6. En verimli aylar hem 2016 hem de 2017'de sırasıyla Haziran ve
Temmuz'dur, ancak yıllar geçtikçe verimlilikte hafif bir azalma olmasına rağmen,
özellikle 2018'de Haziran ve Temmuz aylarında artı herhangi bir firmanın amacının
üretim kaynakları ile ilgili diğer kaynakların yanı sıra girdi ve çıktıların kullanımında
da maksimum verimlilik seviyesine ulaşır. Son olarak, performans verimliliğinin yıl
ilerledikçe daha fazla düşme eğilimi olduğu gerçeği göz önüne alındığında, toplam
verimliliklerini artırmak, bunu sürdürmek ve gelecekteki üretimlerinin gelecekteki
verimliliğini daha da azaltmak için önerilen yolları izleyebilirler.
Anahtar Kelimeler: Fırın Şirketi; Veri Zarfı Analizi (DEA); CCR Giriş Odaklı
Model.Master of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2020. Supervisor: Assist. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi(DAÜ)Daneshvar, Sahand2023-09-26T12:28:30Z2023-09-26T12:28:30Z2020-012020masterThesisAliyu, Aliyu Madaki. (2020). Increasing the Performance Efficiency of Bread Bakery Company Using Data Envelopment Analysis. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5764enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/57992024-02-21T00:01:20Zhdl_11129_13Location Problems with Distribution Capacity and Time LimitationsKaraçeper, EserIndustrial EngineeringProduction ManagementLocation optimizationdistribution capacitiesp-centermaximum coveringLocational decisions are generally considered strategical level decisions. Hence,
location problems received a large concern in the literature. There are several factors
like: distances, demand amounts, facility capacities etc. that may affect the locational
decisions. Most studies in the literature had considered these factors. However, there
are few studies which considers distribution capacities of the production systems.
Today, especially service production systems such as fast-food producers declare a
time limit in their delivery operations. In such systems, the distribution capacities
and distribution time limits should be considered in location problems. In this study,
it is aimed at investigate several realistic versions of location problems with
distribution capacity and time limits, formulate these problems as optimization
problems and develop exact/heuristic solution methods for those problems.
In this study, two distribution capacitated locational problem type had been
developed. Type-1 is distribution capacitated version of well-known p-center
problem on the other hand, type-2 is distribution capacitated version of well-known
maximum-covering problem. MIP models and heuristic algorithms had been
developed for both type of the problem. After that, computed results are compared
and findings had been presented in conclusion section. In addition, a real life case
study had been done too.
Keywords: location optimization, distribution capacities, p-center, maximum
covering.ÖZ:
Yer seçimi kararları genel olarak stratejik kararlardır. Dolayısıyla yer seçimi kararları
üzerine literatürde oldukça fazla sayıda çalışma bulunmaktadır. Uzaklık, talep
miktarı, tesis kapasitesi vb. birtakım faktörler yer seçimi kararlarını etkilemektedir.
Yukarıda bahsedilen faktörler literatürde birçok çalışmada yer almıştır. Fakat, bir
üretimin sisteminin dağıtım kapasitesi düşünülürek yapılan çalışmalar oldukça az
sayıdadır.
Günümüzde, servis üzerine hizmet veren üretim sistemleri dağıtım operasyonları için
zaman kısıtı koymuşlardır. Buna örnek olarak Fast-Food tesislerini verebiliriz. Bu
tarz sistemlerde yer seçimi problemi düşünülürken dağıtım kapasiteleri ve dağıtım
süreleride hesaba katılmaladır. Bu çalışmanın amacı gerçekçi dağıtım kapasiteli ve
zaman kısıtlı yer seçimi problemlerini araştırıp daha sonra bunları çözmek üzere
kesin ve sezgisel çözüm yöntemlerini formülüze etmektir.
Bu çalışmada dağıtım kapasiteli iki farklı yer seçimi problemi geliştirilmiştir. Tip 1
problemi literatürde bilinen p-center probleminin dağıtım kapasiteli versiyonudur öte
yandan Tip 2 probleimi literatürde bilinen maximum-covering probleminin dağıtım
kapasiteli versiyondur. Her iki problem tipi içi karışık tamsayı izlenceleme modelleri
ve sezgisel algoritmalar oluşturulmuştur. Daha sonra, bulunan sonuçlar
karşılaştırılmış ve bulgular sonuç bölümünde yer almıştır. Ayrıca, gerçek hayattan
bir vaka çalışması yapılmıştır.
Anahtar Kelimeler: yer seçimi eniyilemesi, dağıtımı kapasitesleri, p-center,
maximum coveringMaster of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2019. Supervisor: Assoc. Prof. Dr. Hüseyin Güden.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Güden, Hüseyin (Supervisor)2024-02-20T08:53:19Z2024-02-20T08:53:19Z2019-122019masterThesisKaraçeper, Eser. (2019). Location Problems with Distribution Capacity and Time Limitations. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5799enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/58252024-03-08T00:01:26Zhdl_11129_13An Extension of Smart Failure Modes and Effects Application for Wind TurbinesKara, Esma SedefIndustrial EngineeringEnergy consumption--Wind Power--Environmental aspectsRenewable energy sources--Wind Power--Wind Turbines--Data Envelopment AnalysisEnvironmental impact analysisIndustrial and Production EngineeringProduction Engineering--Industrial efficiency--MeasurementData Envelopment AnalysisWind powerWind turbineRenewable EnergyFeasibility Study of Wind FarmSmart FMEAAnalytical Hierarchy ProcessEnergy is a critical part of socio-economic growth and financial expansion.
Wind energy, for instance, is a RE source that is native to the area and may assist in
reducing reliance on fossil fuels. Electricity production from wind energy has
increased dramatically in recent years all around the earth. The most critical
challenge for the wind business is effectively predicting the dependability and
availability of newly constructed WT. Furthermore, the FMEA approach has been
utilized to investigate the dependability of a variety of power production systems.
We suggest evaluating the windmill system technique using Smart FMEA, which is a
mix of standard FMEA, DEA, and AHP. The components of WT are the focus of the
failure mechanisms, impacts, and analyses. As components of WT, time and costs
criticalities are gained. Several crucial choice criteria are validated under this study,
in addition to weather (temperature, wind speed, wind direction, and so on) and wind
turbine type. It also examines the interaction between components of wind farms that
will be presented as downtime, cost criticalities are examined with a type of WT
using AHP and DEA with crisp linguistic modeling and analyzes the impacts of
decision factors while applying Smart FMEA on WT.
Keywords: Data Envelopment Analysis, Wind power, Wind turbine, Renewable
Energy, Feasibility Study of Wind Farm, Smart FMEA, Analytical Hierarchy
Process.ÖZ:
Enerji, sosyo-ekonomik büyümenin ve finansal genişlemenin kritik bir
parçasıdır. Rüzgar enerjisi, bölgeye özgü bir yenilenebilir enerji kaynağıdır ve fosil
yakıtlara olan bağımlılığın azaltılmasına yardımcı olabilir. Son yıllarda tüm dünyada
rüzgar enerjisinden elektirik üretimi çarpıcı şekilde artmıştır. Rüzgar enerjisinde yeni
inşa edilmiş rüzgar türbününün güvenilirliğini ve kullanılabilirliğini etkin bir şekilde
tahmin etmek en kritik konudur. Çeşitli güç üretim sistemlerinin güvenilirliğini
araştırmak için FMEA yaklaşımı kullanılmıştır. Bu çalışmada Standart FMEA, DEA
ve AHP'nin bir karışımı olan Smart FMEA'yı kullanarak rüzgar türbünü system
tekniğini değerlendirmenizi öneriyoruz. Rüzgar türbününün bileşenleri, arıza
mekanizmalarının, etkilerinin ve analizlerinin odak noktasıdır. Bu çalışma
kapsamında hava durumu (sıcaklık, rüzgarhızı, rüzgaryönü vb.) ve rüzgar turbine
tipine ek olarak birkaç önemli seçim kriteri doğrulanmıştır. Ayrıca rüzgar
çiftliklerinin bileşenleri arasındaki etkileşimi de incelenmiştir. Ayrıca, akıllı FMEA
rüzgar santralleri üzerinde uygulanırken karar değişkenlerinin etkilerini analiz eder
ve AHP, veri zarflama analizi kullanarak santrallerde oluşabilecek hatalardan
kaynaklı duruş süresi ve maliyet kriterleri arasındaki ilişkileri inceler.
AnahtarKelimeler: Veri Zarflama Analizi, Rüzgar Enerjisi, Rüzgar Türbünü,
Yenilenebilir Enerji, Rüzgar çiftliklerinde fizibilite çalışması, Akıllı Hata Türleri ve
Etkileri Analizi, Analitik Hiyerarji SüreciDoctor of Philosophy in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (Ph.D.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2022. Supervisor: Assoc. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand (Supervisor)2024-03-07T08:49:02Z2024-03-07T08:49:02Z2022-012022doctoralThesisKara, Esma Sedef. (2022). An Extension of Smart Failure Modes and Effects Application for Wind Turbines. Thesis (Ph.D.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5825enginfo:eu-repo/semantics/openAccess
oai:i-rep.emu.edu.tr:11129/57882024-02-16T00:01:12Zhdl_11129_13Effectiveness of Failure Mode and Effect Analysis (FMEA) Method: An Application in a Mattress FactoryPiraliyev, JavidIndustrial EngineeringGreen Engineering--Environmental AspectsSustainable developmentGreen chemistryIndustrial ChemistryGreen technology (Environmental technology)FMEADEADEA based FMEAIn today's competitive environment companies use a variety of quality control methods
to increase product quality and transparency, but selecting methods that are consistent
with their principles may put additional power for sustainable development and profit.
FMEA is one of the easiest and effective risk assessment method that aims to eliminate
or prevent the errors and failures which may occur in the future. This method can be
very effective when combining with different efficiency measurement methods.
In this research FMEA is implemented to Bonnell-spring orthopedic mattress
production factory to identify potential failure modes and find recommended solutions
to increase customer satisfaction and construct a better workplace. Numerous
calculations applied in order to arrange different failure modes and calculate their
efficiencies using Data Envelopment Analysis (DEA) method. It has been found that
the FMEA itself can be insufficient as using aggregated FMEA and calculating the
efficiency by DEA changed the importance of some failures. DEA based FMEA was
the first corresponding research related to mattress production industry.
Keywords: FMEA, DEA, DEA based FMEAÖZ:
Günümüz rekabet ortamında şirketler ürün kalitesini ve şeffaflığını artırmak için çeşitli
kalite kontrol yöntemleri kullanır, ancak ilkeleriyle tutarlı yöntemlerin seçilmesi,
sürdürülebilir kalkınma ve kâr için ek güç sağlayabilir.
Hata Türleri ve Etkileri Analizi, mevcut durumda göze rahatlıkla çarpmayan ancak
gelecekte oluşabilecek hataları ortadan kaldırmayı amaçlayan bir kalite kontrol
yöntemidir. Bu yöntem, farklı verimlilik ölçüm yöntemleri ile birleştirildiğinde çok
etkili olabilir.
Bu araştırmada, olası arıza türlerini belirlemek ve müşteri memnuniyetini artırmak ve
daha iyi bir işyeri inşa etmek ve önerilen çözümler bulmak için bir bonel yaylı
ortopedik yatak üretim fabrikasında HTEA uygulanmıştır. Veri Zarflama Analizi
(VZA) kullanılarak farklı hata türlerinin verimliliklerini hesaplamakla beraber
uygulama içerisinde çok sayıda hesaplama yapılmıştır. Çalışma sonucunda HTEA-nın
tekbaşına yeterli olmadığı ve VZA uygulamasının hataların verimliliğini değiştirdiği
saptanmıştır. VZA bazlı HTEA, yatak üretim endüstrisi ile alakalı ilk araştırmadır.
Anahtar Kelimeler: FMEA, DEA, DEA based FMEAMaster of Science in Industrial Engineering. Institute of Graduate Studies and Research. Thesis (M.S.) - Eastern Mediterranean University, Faculty of Engineering, Dept. of Industrial Engineering, 2022. Supervisor: Assoc. Prof. Dr. Sahand Daneshvar.Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ)Daneshvar, Sahand (Supervisor)2024-02-15T13:14:03Z2024-02-15T13:14:03Z2022-022022masterThesisPiraliyev, Javid. (2022). Effectiveness of Failure Mode and Effect Analysis (FMEA) Method: An Application in a Mattress Factory. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Industrial Engineering, Famagusta: North Cyprus.http://hdl.handle.net/11129/5788enginfo:eu-repo/semantics/openAccess