Browsing Department of Mechanical Engineering by Title

EMU I-REP

Browsing Department of Mechanical Engineering by Title

Sort by: Order: Results:

  • On The use of modified data envelopment analysis models for product line selection 
    Semiromi, Mohammad Elashem Davoodi (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-01)
    ABSTRACT: The process of converting the raw materials to a final product in a factory is called production line. These processes include refinement, purification and assembly. Afterward, selection of best production line ...
  • Optimization of ranking cycle 
    Dadfar, Mohammadhossein (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2013-08)
    ABSTRACT: Optimization of steam power plants has always been a major concern for industries. Even one percent increase in thermal efficiency of a power plant could save lots of money. A power plant which consumes sea water ...
  • Overset Grid Assembler and Flow Solver with Adaptive Spatial Load Balancing 
    Shibliyev, Orhan (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2021-12)
    In the present study, a parallel unsteady and coupled flow solver is developed to solve fluid flow around relatively moving components using a system of multiple unstructured meshes overlapping each other in a parallel ...
  • Performance analysis of a stirling engine heated by two individual heat sources (Solar and fossil fuel) 
    Toughian, Masoud (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-01)
    ABSTRACT: To meet the continuously increasing demand in electricity, while conserving our natural resources and the earth as a whole, more effective and alternative energy sources must be utilized. For an alternative source ...
  • The Performance of Combined Solar Chimney System for Power Generation and Seawater Desalination 
    Yosif, Mohamed Fateh (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-12)
    Energy and fresh water shortages are two important problems which the whole world faces. Making use of solar energy to desalt seawater or brackish water and setting up solar chimney power systems can go some way to solve ...
  • Performances of Flat-Plate and CPC Solar Collectors in Underfloor Heating Systems 
    Sobhansarbandi, Sarvenaz (Eastern Mediterranean University (EMU), 2013)
    ABSTRACT: There is a growing interest in using solar energy in the underfloor heating systems. However, the large areas required for the placing of the solar collectors can be discouraging, especially for the apartment ...
  • Process Optimization in Hole Machining of Glass-Fiber Reinforced Polymer Composite 
    Alhashemi, Ataollah Jalalian (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2013-08)
    ABSTRACT: As Fiber Reinforced Polymer composites (FRPC) in the defense, space and aerospace industries have enjoyed a steady upward trend in usage in recent years, the importance of their machining processes have inevitably ...
  • Reverse Engineering of Pump Impeller Utilizing Rapid Prototyping Technology 
    Kaljahi, Behzad Zamani (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2015-02)
    ABSTRACT: Utilizing the manufacturing procedure of product mostly depended on physical characteristics, accessible facilities and desired specifications of product. In addition, procedure lead-time and economic issues are ...
  • Revitalization of Axial Flow Pump/Turbine h26 Test Rig 
    Kassab, Jad (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2016-06)
    Various solutions are available in the market to enhance the quality of laboratory experiments, but the majorities are expensive. In this study, we present a low-cost approach for the automation and computer aided control ...
  • An RFID - based distributed control system for flexible manufacturing system 
    Barenji, Ali Vatankhah (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2013-06)
    ABSTRACT: A modern flexible manufacturing (FMS) system typically consists of several distributed control systems, such as machining stations, assembling stations, material handling and storage systems. Employing new ...
  • Selection of product designs using modified data envelopment analysis 
    Haghani, Pooya (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-01)
    ABSTRACT: Producing new products and representing the outstanding ones in a right time in a competitive market is considered to be a vital factor for each firm. To gain the customer's confidence in a specific product, each ...
  • Simulation and Economic Analysis of Parabolic Trough Solar Assisted Single Effect Absorption Chiller for Famagusta, Cyprus 
    Sahebari, Reyhaneh Jabbari (Eastern Mediterranean University EMU - Doğu Akdeniz Üniversitesi (DAÜ), 2017-02)
    This research contemplates on the valuable utilization of solar based energy intended for a restricted region in the Mediterranean basin. Especially in Mediterranean section with high solar gains and high cooling demands, ...
  • Simulation and optimization of novel configurations of triple absorption heat transformer integrated to a water desalination system 
    Khamooshi, Mehrdad (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-01)
    In this study, a thermodynamic analysis on six different configurations of triple absorption heat transformer (TAHT) utilizing lithium bromide and water as the working fluid of the cycle integrated with water desalination ...
  • Simulation of Melting of a Pure Substance Using Curvilinear Moving Grids 
    Mirlatifi, Amir Motaleb (Eastern Mediterranean University (EMU), 2009)
    ABSTRACT: Melting and solidification of metals play an important role in material processing, metallurgy, welding, and growth of crystals from melts and solutions. There are generally two types of methods to simulate the ...
  • Simulation of Ocean Waves and Marine Currents by Smoothed Particle Hydrodynamics Method 
    Rashidian, Hossein (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-07)
    Using the advances in smoothed particle hydrodynamics method in the numerical simulation of the ocean waves and marine currents is the aim of this study. The ocean wave has been proposed to be one of the most commercially ...
  • Simulation of the Knee Joint Motion by Stewart Platform 
    Al-Khaffaf, Ammar Tareq Najeeb (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-10)
    The knee is one of the most commonly studied human body joints in the field of biomechanics. Biomechanical knee joint studies aim to understand joint mechanics by utilizing kinematics and dynamics. Understanding the mechanics ...
  • Single and double pass solar air heaters with wire mesh as packing bed 
    Aldabbagh, LBY; Egelioğlu, Fuat; İlkan, Mustafa (Pergamon, 2010-09)
    The thermal performances of single and double pass solar air heaters with steel wire mesh layers are used instead of a flat absorber plate are investigated experimentally. The effects of mass flow rate of air on the outlet ...
  • Solar Desalination System by Humidification Dehumidification Method 
    Sousi, Abdulla (Eastern Mediterranean University (EMU), 2013)
    ABSTRACT: A humidification/dehumidification (HDH) solar desalination unit having combined solar water/air heater was designed constructed and experimentally investigated. The main components of the desalination system are ...
  • Submerged Machining of Steel and Aluminum 
    Saadieh, Abdel Salam (Eastern Mediterranean University EMU, 2015-06)
    Machining is the process of removing material in the form of chips. It is the most widely used technique in manufacturing. It especially comes into play when specific dimensions and surface properties are required. One of ...
  • Sustainability Assessment of Photovoltaic Power Plants in North Cyprus 
    Erciyas, Orhan (Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ), 2014-06)
    ABSTRACT: The clean, cheap and environmental friendly renewable energy sources, such as solar energy, are good alternatives to fossil fuels for generating electricity, especially in the Middle Eastern countries like N. ...