Abstract:
ABSTRACT: Using high strength steel has some advantage like reducing weight of the structures. That means less consumption of steel. The smaller member sizes are more favoured by architects. High strength steel represents limited deformability. In this study the
deformation of the connection is mainly caused by the deformation of the end-plate
and elongation of the bolts. A series of finite element investigation was conducted to
study the high strength steel extended end-plate moment connections subjected to
monotonic loading. The finite element model of connection is calibrated by using
experimental test results of extended end-plate connections.
The steel grade of plate and bolts and the thickness of the plate were changed to
investigate the behaviour of the connection. The finite element analysis results
demonstrate that the high strength steel extended end-plate moment connections can
be suitable for use in steel moment frame structures. The results indicate that by
decreasing the end-plate steel grade the ductility was increased but the moment
resistance was decreased. 12.9 grade bolts have less ductility than 10.9 grade bolts
and 8.8 grade bolts have more ductility than both 12.9 and 10.9 grade bolts. The
thinner end plate showed more ductility and lower moment resistance than the
thicker end plate. The results obtained from the finite element modeling indicated
that the finite element method is a good choice for estimating the behaviour of endplate
connections.
Keywords: High Strength Steel, Extended End-Plate Connections, Finite Element
Method, Moment Resistance, Ductility.
…………………………………………………………………………………………………………………………
ÖZ: Yapılarda yüksek dayanımlı çelik kullanımının bir avantajı daha hafif bir yapı elde
edilmesidir. Bu da daha az çelik kullanımı anlamına gelir. Mimarlar daha küçük
ebadlarda çelik elemanları tercih ederler. Yüksek dayanımlı çelik kısıtlı oranda
deformasyonu temsil eder.
Bu calismadaki kolon-kiriş bağlantısının şekil değiştirmesinin en onemli nedeni,
plaka bağlantısindaki şekil değiştirme ve civatadaki eksenel uzamadan
kaynaklanmaktadır.
Sonsuz elemanlar metodu kullanılarak yüksek dayanımlı çelikten üretilmiş moment
bağlantılarının monotonik olarak yüklenmes üzerine bir dizi araştırma yapılmıştır.
Bağlantının sonsuz eleman modelinin kalibrasyonu için başka araştırmacılar
tarafından ayni tip bağlantılar için yapılan deney sonuçları kullanılmıştır. etodu
kullanılarak oluşturulan bağlantı.
Bağlantının davranışını incelemek için çeşitli bağlantı plaka ve civata çelik sınıfı ve
plaka kalınlıkları kullanılmıştır. Sonlu elemanlar kullanılarak yapılan analiz
sonuçlarına göre yüksek dayanımlı çelik plakalı moment bağlantılarının moment
taşıyan çelik karkas yapılarda kullanılması uygun bulunmuştur.
Elde edilen sonuçlara göre plakalı bağlantıların çelik sınıfını düşürmek çelik
esnekliğinin artmasına neden olur, ayni zamanda, moment dayanımının da
azalmasına neden olur. Sonuçlara göre 12.9’luk civata 10.9 ve 8.8’lik civatadan
daha az sünektir. İnce olan bağlantı plakasının kalın olana oranla daha sünek
v
davrandığı ve daha düşük moment dayanımı olduğu saptanmıştır. Sonlu elemanlar
modellemesinden elde edilen sonuçlar plakalı bağlantıların davranışını incelemede
bu yaklaşımın doğru bir seçim olduğu yönündedir.
Anahtar Kelimeler: Yüksek dayanımlı çelik, plakalı bağlantılar, sonlu elemanlar
Methodu, Moment bağlantıları, süneklik.
Description:
Master of Science in Civil Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Civil Engineering, 2012. Supervisor: Assist. Prof. Dr. Murude Celikag.