Effect of Supplementary Cementitious Materials on Mechanical Properties and Self-Healing Efficiency of Engineered Cementitious Composite

EMU I-REP

Show simple item record

dc.contributor.advisor Akçaoğlu, Tülin
dc.contributor.author Nassar, Mus'ab Badran A.
dc.date.accessioned 2021-06-14T06:01:42Z
dc.date.available 2021-06-14T06:01:42Z
dc.date.issued 2018
dc.date.submitted 2018
dc.identifier.citation Nassar, Mus'ab Badran A.. (2018). Effect of Supplementary Cementitious Materials on Mechanical Properties and Self-Healing Efficiency of Engineered Cementitious Composite. Thesis (M.S.), Eastern Mediterranean University, Institute of Graduate Studies and Research, Dept. of Civil Engineering, Famagusta: North Cyprus. en_US
dc.identifier.uri http://hdl.handle.net/11129/4962
dc.description Master of Science in Civil Engineering. Thesis (M.S.)--Eastern Mediterranean University, Faculty of Engineering, Dept. of Civil Engineering, 2018. Supervisor: Assist. Prof. Dr. Tülin Akçaoğlu. en_US
dc.description.abstract Concrete is considered as a fundamental construction material as it has high compressive strength and fairly low cost. However, brittleness behavior and limited tensile strength can be remarkably observed in conventional concrete and accordingly, crack formation easily occurs. Many researchers have dedicated considerable efforts to adjust the brittleness characteristic and other weak points of conventional concrete and thus, they come up with the development of a new type of concrete, which is named engineered cementitious composite (ECC). In this experimental study, it is aimed to investigate the effects of replacing slag (S) 100% with fly ash (FA), in different proportions with limestone powder (LSP), and glass powder (GP); on workability, mechanical properties, microcracking behavior and self-healing efficiency of ECC. For this purpose eight different ECC mixtures were prepared; at first reference sample is produced with a certain amount of cement and slag as a binder, then slag is replaced 100% with fly ash, 5, 20 and 40% with LSP and 20, 40 and 60% with GP by total mass of slag. In order to determine and compare the effects of slag, fly ash, LSP and GP on workability, mechanical properties and behavior and self-healing efficiency of ECC; flow test, compressive and splitting tensile strength tests at different compressive loading levels, stress-strain diagrams tests under compression were conducted. In addition, self-healing efficiency of eight different ECC produced were determined by means of ultrasound readings and stereomicroscope measurements. Here, cracks were created on the surface of specimens by preloading them up to ultimate splitting tensile strength. After that, microscope and ultrasonic test were utilized to observe and determine the self-healing recovery rate. Overall, replacing slag with LSP up to 5% and with GP up to 20% displayed significant improvement on mechanical properties of ECC and a high relative comparative of self-healing efficiency with ECC-Ref. Calcium carbonate and C-S-H gels were observed to be the prominent healing products. en_US
dc.description.abstract ÖZ: Beton, yüksek basınç dayanım özeliği ve de düşük maliyetli olması sebebiyle en temel inşaat malzemesi olarak kabul edilir. Ancak, betonun gevrek yapıya sahip olması, ve de düşük çekme dayanımı sebebiyle çatlak oluşumu olasılığı yüksektir. Bu yüzden geleneksel beton üretiminde bu konulara dikkat edilmesi gerekmektedir. Pek çok araştırmacı, betonun kırılganlık karakteristiği ve diğer zayıf özeliklerini azaltmak veya gidermek için önemli çabalar harcamış ve böylece, yüksek çimento içerikli kompoze bir beton tipi üretilmiştir (MKB). Bu deneysel çalışmada, cüruf (C) yerine %100 uçucu kül (UK), farklı oranlarda kireç tozu (KT) ve cam tozu (CT) kullanılmasının; betonun işlenebilirlik, mekanik özellikleri, çatlak davranış ve MKB kendi kendini iyileştirme verimliliği üzerindeki etkileri araştırılmıştır. Bu amaç için sekiz farklı MKB karışımı hazırlanmıştır; ilk referans karışımı, çimento ve cüruf bağlayıcı olarak hazırlanmıştır. Daha sonra cüruf yerine uçucu kul % 5, 20, 40 oranlarında ve kireç tozu % 20, 40 60 oranlarında cüruf toplam kütlesi ile değiştirilmiştir. Bu karışımların etkilerini belirlemek ve cüruf etkileri ile karşılaştırmak için işlenebilirlik, mekanik özellikleri ve davranışı ve kendi kendini iyileştirme verimliliğini tesbiti için; işlenebilirlik testi, basınç ve yarmada çekme dayanımı testleri, farklı basınç düzeylerinde çatlak oluşumu ve giderilebilmesi çalışmaları için basınç yükü altında gerilme - şekil değiştirme diyagramları testleri yapılmıştır. Buna ek olarak, üretilen sekiz farklı MKB betonunda kendi kendine çatlak oluşan çatlakların giderilmesi işlemi öncesi ve sonrasında ses dalgaları ile firkin tesbit edilebilmesi deneyleri yapılmıştır. Genel olarak, %5 cüruf, kireç taşı ve cam tozu ile önemli MKB betonun mekanik özellikleri ve de çatlak giderilmesi tesbit edilmiştir. karbonat ile kendi kendini onaran bir yüksek göreli karşılaştırmalı olarak görüntülenen %20 C-S-H jelleri olmak gözlendi önde gelen şifa ürünleri. en_US
dc.language.iso eng en_US
dc.publisher Eastern Mediterranean University (EMU) - Doğu Akdeniz Üniversitesi (DAÜ) en_US
dc.rights info:eu-repo/semantics/openAccess en_US
dc.subject Civil Engineering en_US
dc.subject Construction Engineering--Supplementary Cementitious Materials en_US
dc.subject Engineered cementitious composites (ECC) en_US
dc.subject self-healing efficiency en_US
dc.subject supplementary cementitious material (SCM) en_US
dc.subject glass powder (GP) en_US
dc.subject limestone powder (LSP) en_US
dc.title Effect of Supplementary Cementitious Materials on Mechanical Properties and Self-Healing Efficiency of Engineered Cementitious Composite en_US
dc.type masterThesis en_US
dc.contributor.department Eastern Mediterranean University, Faculty of Engineering, Dept. of Civil Engineering en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record