Performance Analysis of Salt-In-Pumice Composites Under Varying Air Velocities for Thermochemical Heat Storage
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Access Rights
Abstract
Thermochemical energy storage (TCES) offers significant potential for reducing reliance on fossil fuels while enhancing the utilization of renewable energy sources. The performance of TCES systems is critically influenced by the properties of thermochemical heat storage materials (TCMs), which directly affect both energy efficiency and storage capacity. In this study, a laboratory-scale experimental investigation was conducted to assess the performance of three pumice-based composite TCMs (P/LiCl-CaCl?, P/CaCl?, and CS-P/CaCl?) under varying air velocities. Pumice particles with diameters of 1–3 mm were employed for P/LiCl-CaCl? and P/CaCl?, whereas coarse size (CS) (4–6 mm) pumice was used for CS-P/CaCl?. The primary objective was to evaluate the effects of particle size and LiCl incorporation on the thermal performance of composite TCMs. Key performance indicators, including energy efficiency (?I), exergy efficiency (?II), energy storage density (Ed), and outlet peak temperature (To,p), were determined. For P/LiCl-CaCl?, average energy efficiencies of 64.0% and 76.6% were recorded at air velocities of 2.1 m/s and 3.7 m/s, respectively, with corresponding exergy efficiencies of 10.5% and 11.2%, and T?,p values of 46.4 °C and 47.7 °C. The P/CaCl? composite achieved lower performance, with energy efficiencies of 44.7% and 48.4%, exergy efficiencies of 4.9% and 5.2%, and T?,p values of 42.5 °C and 39.0 °C. For CS-P/CaCl?, energy efficiencies were 64.2% and 72.2%, exergy efficiencies were 5.8% and 5.4%, and T?,p values were 40.9 °C and 39.0 °C, respectively. The maximum Ed of approximately 181 kWh/m³ was observed for P/LiCl-CaCl? at 3.7 m/s. Across all composite materials, both energy efficiency and Ed increased with higher air velocity. Furthermore, the exergy efficiency of P/LiCl-CaCl? was nearly double that of the other two composites, indicating a clear advantage of LiCl incorporation combined with smaller pumice particle sizes. © Cerebration Science Publishing, © 2025 by the authors.










